[U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870
Kevin Hilman
khilman at kernel.org
Wed Feb 25 20:55:51 CET 2015
Nishanth Menon <nm at ti.com> writes:
> On 13:27-20150220, Akshay Saraswat wrote:
>> This patch adds workaround for ARM errata 798870 which says
>> "If back-to-back speculative cache line fills (fill A and fill B) are
>> issued from the L1 data cache of a CPU to the L2 cache, the second
>> request (fill B) is then cancelled, and the second request would have
>> detected a hazard against a recent write or eviction (write B) to the
>> same cache line as fill B then the L2 logic might deadlock."
>>
>> Signed-off-by: Kimoon Kim <kimoon.kim at samsung.com>
>> Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
>> Reviewed-by: Simon Glass <sjg at chromium.org>
>> Tested-by: Simon Glass <sjg at chromium.org>
>> ---
>> Changes since v3:
>> - Added errata number in comment.
>> - Moved changes to arm generic armv7.h
>>
>> Changes since v2:
>> - No change.
>>
>> Changes since v1:
>> - Added Reviewed-by & Tested-by.
>> - Added space before */ on line # 40.
>>
>> arch/arm/include/asm/armv7.h | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
>> index a13da23..a2040b7 100644
>> --- a/arch/arm/include/asm/armv7.h
>> +++ b/arch/arm/include/asm/armv7.h
>> @@ -69,6 +69,22 @@
>> #define CP15DSB asm volatile ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0))
>> #define CP15DMB asm volatile ("mcr p15, 0, %0, c7, c10, 5" : : "r" (0))
>>
>> +/*
>> + * Workaround for ARM errata # 798870
>> + * Set L2ACTLR[7] to reissue any memory transaction in the L2 that has been
>> + * stalled for 1024 cycles to verify that its hazard condition still exists.
>> + */
>> +static inline void v7_enable_l2_hazard_detect(void)
>> +{
>> + uint32_t val;
>> +
>> + /* L2ACTLR[7]: Enable hazard detect timeout */
>> + asm volatile ("mrc p15, 1, %0, c15, c0, 0\n\t" : "=r"(val));
>> + val |= (1 << 7);
>> + asm volatile ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(val));
>
> This wont work for us in DRA7/OMAP5 L2ACTLR cannot be modified by
> u-boot. has to go to secure world using smc call.
>
I believe the same may be true even on some exynos5 platforms with
secure firmware (e.g. exynos5422-odroid-xu3).
Kevin
More information about the U-Boot
mailing list