[U-Boot] [PATCH v2] mtd: nand: mxs: fix PIO_WORD number

[Luca Ellero]

As stated in the iMX6 Reference Manual (Ch. 14.2), the CMDPIOWORDS field
should reflect the number of pio_words sent in the actual DMA transfer.
In all these transfers there is only one pio_word, so data field must be 1.

Signed-off-by: Luca Ellero <luca.ellero at brickedbrain.com>
---
Changes for v2:
   - merge together all the patchset

 drivers/mtd/nand/mxs_nand.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 7a064ab..428a250 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -305,7 +305,7 @@ static void mxs_nand_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
 	d->cmd.data =
 		MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
 		MXS_DMA_DESC_CHAIN | MXS_DMA_DESC_DEC_SEM |
-		MXS_DMA_DESC_WAIT4END | (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+		MXS_DMA_DESC_WAIT4END | (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
 		(nand_info->cmd_queue_len << MXS_DMA_DESC_BYTES_OFFSET);
 
 	d->cmd.address = (dma_addr_t)nand_info->cmd_buf;
@@ -453,7 +453,7 @@ static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length)
 	d->cmd.data =
 		MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
 		MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM |
-		MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+		MXS_DMA_DESC_WAIT4END | (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
 
 	d->cmd.address = 0;
 
@@ -510,7 +510,7 @@ static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 	d->cmd.data =
 		MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
 		MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
-		(4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+		(1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
 		(length << MXS_DMA_DESC_BYTES_OFFSET);
 
 	d->cmd.address = (dma_addr_t)nand_info->data_buf;
-- 
1.7.10.4