[U-Boot] [u-boot 37/40] include: configs: Enable DWC3 and DFU in DRA7xx
Lukasz Majewski
l.majewski at samsung.com
Mon Feb 16 12:50:05 CET 2015
Hi Kishon,
> Enabled dwc3, dwc3-omap and PHY for dwc3 are enabled. Also enabled
> support for DFU.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
> include/configs/dra7xx_evm.h | 63
> +++++++++++++++++++++++++++++++++++++
> include/configs/ti_omap5_common.h | 5 +++ 2 files changed, 68
> insertions(+)
>
> diff --git a/include/configs/dra7xx_evm.h
> b/include/configs/dra7xx_evm.h index 174a711..75b55d9 100644
> --- a/include/configs/dra7xx_evm.h
> +++ b/include/configs/dra7xx_evm.h
> @@ -43,6 +43,47 @@
> "uuid_disk=${uuid_gpt_disk};" \
> "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
>
> +#define DFU_ALT_INFO_MMC \
> + "dfu_alt_info_mmc=" \
> + "boot part 0 1;" \
> + "rootfs part 0 2;" \
> + "MLO fat 0 1;" \
> + "MLO.raw raw 0x100 0x100;" \
> + "u-boot.img.raw raw 0x300 0x400;" \
> + "spl-os-args.raw raw 0x80 0x80;" \
> + "spl-os-image.raw raw 0x900 0x2000;" \
> + "spl-os-args fat 0 1;" \
> + "spl-os-image fat 0 1;" \
> + "u-boot.img fat 0 1;" \
> + "uEnv.txt fat 0 1\0"
> +
> +#define DFU_ALT_INFO_EMMC \
> + "dfu_alt_info_emmc=" \
> + "rawemmc raw 0 3751936;" \
> + "boot part 1 1;" \
> + "rootfs part 1 2;" \
> + "MLO fat 1 1;" \
> + "MLO.raw raw 0x100 0x100;" \
> + "u-boot.img.raw raw 0x300 0x400;" \
> + "spl-os-args.raw raw 0x80 0x80;" \
> + "spl-os-image.raw raw 0x900 0x2000;" \
> + "spl-os-args fat 1 1;" \
> + "spl-os-image fat 1 1;" \
> + "u-boot.img fat 1 1;" \
> + "uEnv.txt fat 1 1\0"
> +
> +#define DFU_ALT_INFO_RAM \
> + "dfu_alt_info_ram=" \
> + "kernel ram 0x80200000 0x4000000;" \
> + "fdt ram 0x80f80000 0x80000;" \
> + "ramdisk ram 0x81000000 0x4000000\0"
> +
> +#define DFUARGS \
> + "dfu_bufsiz=0x10000\0" \
> + DFU_ALT_INFO_MMC \
> + DFU_ALT_INFO_EMMC \
> + DFU_ALT_INFO_RAM
> +
> #include <configs/ti_omap5_common.h>
>
> /* Enhance our eMMC support / experience. */
> @@ -132,6 +173,28 @@
> #define CONFIG_OMAP_USB_PHY
> #define CONFIG_OMAP_USB2PHY2_HOST
>
> +/* USB GADGET */
> +#define CONFIG_USB_DWC3_PHY_OMAP
> +#define CONFIG_USB_DWC3_OMAP
> +#define CONFIG_USB_DWC3
> +#define CONFIG_USB_DWC3_GADGET
> +
> +#define CONFIG_USB_GADGET
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0403
> +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
> +#define CONFIG_USB_GADGET_DUALSPEED
> +
> +/* USB Device Firmware Update support */
> +#define CONFIG_DFU_FUNCTION
> +#define CONFIG_DFU_RAM
> +#define CONFIG_CMD_DFU
> +
> +#define CONFIG_DFU_MMC
> +#define CONFIG_DFU_RAM
> +
> /* SATA */
> #define CONFIG_BOARD_LATE_INIT
> #define CONFIG_CMD_SCSI
> diff --git a/include/configs/ti_omap5_common.h
> b/include/configs/ti_omap5_common.h index c47651d..cdc539c 100644
> --- a/include/configs/ti_omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -65,6 +65,10 @@
> #define PARTS_DEFAULT
> #endif
>
> +#ifndef DFUARGS
> +#define DFUARGS
> +#endif
> +
> #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> #define CONFIG_EXTRA_ENV_SETTINGS \
> DEFAULT_LINUX_BOOT_ENV \
> @@ -122,6 +126,7 @@
> "if test $fdtfile = undefined; then " \
> "echo WARNING: Could not determine device
> tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr}
> ${bootdir}/${fdtfile};\0" \
> + DFUARGS \
>
> #define CONFIG_BOOTCOMMAND \
> "run findfdt; " \
Reviewed-by: Lukasz Majewski <l.majewski at samsung.com>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the U-Boot
mailing list