[U-Boot] [PATCH 1/3] lsxl: use default load addresses for legacy boot

[Michael Walle]

The load addresses for the bootcmd_legacy script were taken from the
original bootloader from Buffalo. But newer kernels are too big and the
uncompressing will overwrite parts of the initial ramdisk. Therefore,
we switch to the load addresses which are also used by the other boot
script.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 include/configs/lsxl.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index a14bfe3..6c8e369 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -127,9 +127,9 @@
 	"ramdisk_addr=0x01000000\0"					\
 	"fdt_addr=0x01ff0000\0"						\
 	"bootcmd_legacy=ide reset "					\
-		"&& load ide ${hdpart} 0x00100000 /uImage.buffalo "	\
-		"&& load ide ${hdpart} 0x00800000 /initrd.buffalo "	\
-		"&& bootm 0x00100000 0x00800000\0"			\
+		"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo "	\
+		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"bootcmd_net=bootp ${kernel_addr} uImage "			\
 		"&& tftpboot ${ramdisk_addr} uInitrd "			\
 		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
-- 
2.1.4