[U-Boot] [PATCH] ARM: at91: at91sam9rlek: update the default nand flash configs

[Bo Shen]

Hi Josh

On 02/02/2015 05:31 PM, Josh Wu wrote:
> Update the nand flash offset mapping, default nand bootcmand and
> bootargs to align with linux4sam.org.
>
> Signed-off-by: Josh Wu <josh.wu at atmel.com>

except the following concern:

Acked-by: Bo Shen <voice.shen at atmel.com>

> ---
>
>   include/configs/at91sam9rlek.h | 16 +++++++++-------
>   1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
> index d5f0197..f790fcf 100644
> --- a/include/configs/at91sam9rlek.h
> +++ b/include/configs/at91sam9rlek.h
> @@ -151,14 +151,16 @@
>
>   /* bootstrap + u-boot + env + linux in nandflash */
>   #define CONFIG_ENV_IS_IN_NAND		1
> -#define CONFIG_ENV_OFFSET		0x60000
> -#define CONFIG_ENV_OFFSET_REDUND	0x80000
> +#define CONFIG_ENV_OFFSET		0xc0000
> +#define CONFIG_ENV_OFFSET_REDUND	0x100000
>   #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
> -#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
> -#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
> -				"root=/dev/mtdblock5 " \
> -				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
> -				"rw rootfstype=jffs2"
> +#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootz 0x22000000"

The kernel partition is 6MiB, as here only read 3MiB. As the Linux 
kernel is switch to multi-platform support. The Linux kernel size is 
bigger than 3MiB now.

> +#define CONFIG_BOOTARGS		\
> +				"console=ttyS0,115200 earlyprintk "				\
> +				"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
> +				"256K(env),256k(evn_redundent),256k(spare),"			\
> +				"512k(dtb),6M(kernel)ro,-(rootfs) "				\
> +				"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
>
>   #endif
>
>

Best Regards,
Bo Shen