[U-Boot] [PATCH v4] imx6: Added DEK blob generator command

Stefano Babic sbabic at denx.de
Fri Feb 20 09:43:26 CET 2015


Hi Ulises,

On 17/02/2015 21:14, Ulises.Cardenas at freescale.com wrote:
> From: Raul Cardenas <Ulises.Cardenas at freescale.com>
> 
> Freescale's SEC block has built-in Data Encryption
> Key(DEK) Blob Protocol which provides a method for
> protecting a DEK for non-secure memory storage.
> SEC block protects data in a data structure called
> a Secret Key Blob, which provides both confidentiality
> and integrity protection.
> Every time the blob encapsulation is executed,
> a AES-256 key is randomly generated to encrypt the DEK.
> This key is encrypted with the OTP Secret key
> from SoC. The resulting blob consists of the encrypted
> AES-256 key, the encrypted DEK, and a 16-bit MAC.
> 
> During decapsulation, the reverse process is performed
> to get back the original DEK. A caveat to the blob
> decapsulation process,  is that the DEK is decrypted
> in secure-memory and can only be read by FSL SEC HW.
> The DEK is used to decrypt data during encrypted boot.
> 
> Commands added
> --------------
>   dek_blob - encapsulating DEK as a cryptgraphic blob
> 
> Commands Syntax
> ---------------
>   dek_blob src dst len
> 
>     Encapsulate and create blob of a len-bits DEK at
>     address src and store the result at address dst.
> 
> Signed-off-by: Raul Cardenas <Ulises.Cardenas at freescale.com>
> Signed-off-by: Nitin Garg <nitin.garg at freescale.com>
> 
> Signed-off-by: Ulises Cardenas <ulises.cardenas at freescale.com>
> ---
> 
> Changes in v4:
> -Improve coding style as recommended by Simon
> -Add const type qualifier to functions using the
> plaintext as a parameter
> -Fix and add documentation
> 
> Changes in v3:
> -Improve cache management for relevant descriptors
> -Add cache management to RNG instantiate
> 
> Changes in v2:
> -Remove weak symbol as recommended by Ruchika
> 
>  arch/arm/imx-common/Makefile             |   1 +
>  arch/arm/imx-common/cmd_dek.c            |  89 ++++++++++++++++++
>  arch/arm/imx-common/timer.c              |  17 ++++
>  arch/arm/include/asm/arch-mx6/imx-regs.h |   4 +
>  doc/README.mxc_hab                       |  48 ++++++++++
>  drivers/crypto/fsl/Makefile              |   2 +-
>  drivers/crypto/fsl/desc.h                |  15 ++++
>  drivers/crypto/fsl/fsl_blob.c            |  52 +++++++++++
>  drivers/crypto/fsl/jobdesc.c             | 149 ++++++++++++++++++++++++++++++-
>  drivers/crypto/fsl/jobdesc.h             |  14 +++
>  drivers/crypto/fsl/jr.c                  |  31 ++++++-
>  include/fsl_sec.h                        |  80 +++++++++++++++++
>  12 files changed, 495 insertions(+), 7 deletions(-)
>  create mode 100644 arch/arm/imx-common/cmd_dek.c
> 
> diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
> index 25a9d4c..606482f 100644
> --- a/arch/arm/imx-common/Makefile
> +++ b/arch/arm/imx-common/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
>  endif
>  obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
>  obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
> +obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
>  
>  quiet_cmd_cpp_cfg = CFGS    $@
>        cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
> diff --git a/arch/arm/imx-common/cmd_dek.c b/arch/arm/imx-common/cmd_dek.c
> new file mode 100644
> index 0000000..376d5f2
> --- /dev/null
> +++ b/arch/arm/imx-common/cmd_dek.c
> @@ -0,0 +1,89 @@
> +/*
> + * Command for encapsulating DEK blob
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +

Short question: is there no copyright on this file ?

> +#include <common.h>
> +#include <command.h>
> +#include <environment.h>
> +#include <malloc.h>
> +#include <asm/byteorder.h>
> +#include <linux/compiler.h>
> +#include <fsl_sec.h>
> +#include <asm/arch/clock.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/**
> +* blob_dek() - Encapsulate the DEK as a blob using CAM's Key
> +* @src: - Address of data to be encapsulated
> +* @dst: - Desination address of encapsulated data
> +* @len: - Size of data to be encapsulated
> +*
> +* Returns zero on success,and negative on error.
> +*/
> +static int blob_encap_dek(const u8 *src, u8 *dst, u32 len)
> +{
> +	int ret = 0;
> +	u32 jr_size = 4;
> +
> +	u32 out_jr_size = sec_in32(CONFIG_SYS_FSL_JR0_ADDR + 0x102c);
> +	if (out_jr_size != jr_size) {
> +		hab_caam_clock_enable(1);
> +		sec_init();
> +	}
> +
> +	if (!((len == 128) | (len == 192) | (len == 256))) {
> +		debug("Invalid DEK size. Valid sizes are 128, 192 and 256b\n");
> +		return -1;
> +	}
> +
> +	len /= 8;
> +	ret = blob_dek(src, dst, len);
> +
> +	return ret;
> +}
> +
> +/**
> + * do_dek_blob() - Handle the "dek_blob" command-line command
> + * @cmdtp:  Command data struct pointer
> + * @flag:   Command flag
> + * @argc:   Command-line argument count
> + * @argv:   Array of command-line arguments
> + *
> + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
> + * on error.
> + */
> +static int do_dek_blob(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
> +{
> +	uint32_t src_addr, dst_addr, len;
> +	uint8_t *src_ptr, *dst_ptr;
> +	int ret = 0;
> +
> +	if (argc != 4)
> +		return CMD_RET_USAGE;
> +
> +	src_addr = simple_strtoul(argv[1], NULL, 16);
> +	dst_addr = simple_strtoul(argv[2], NULL, 16);
> +	len = simple_strtoul(argv[3], NULL, 10);
> +
> +	src_ptr = map_sysmem(src_addr, len/8);
> +	dst_ptr = map_sysmem(dst_addr, BLOB_SIZE(len/8));
> +
> +	ret = blob_encap_dek(src_ptr, dst_ptr, len);
> +
> +	return ret;
> +}
> +
> +/***************************************************/
> +static char dek_blob_help_text[] =
> +	"src dst len            - Encapsulate and create blob of data\n"
> +	"                         $len bits long at address $src and\n"
> +	"                         store the result at address $dst.\n";
> +
> +U_BOOT_CMD(
> +	dek_blob, 4, 1, do_dek_blob,
> +	"Data Encryption Key blob encapsulation",
> +	dek_blob_help_text
> +);
> diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
> index 65ef60b..e522990 100644
> --- a/arch/arm/imx-common/timer.c
> +++ b/arch/arm/imx-common/timer.c
> @@ -176,3 +176,20 @@ ulong get_tbclk(void)
>  {
>  	return gpt_get_clk();
>  }
> +
> +/*
> + * This function is intended for SHORT delays only.
> + * It will overflow at around 10 seconds @ 400MHz,
> + * or 20 seconds @ 200MHz.
> + */
> +unsigned long usec2ticks(unsigned long usec)
> +{
> +	ulong ticks;
> +
> +	if (usec < 1000)
> +		ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
> +	else
> +		ticks = ((usec / 10) * (get_tbclk() / 100000));
> +
> +	return ticks;
> +}
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index ae88b6e..9a4ad8b 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -215,6 +215,10 @@
>  #define AIPS2_OFF_BASE_ADDR         (ATZ2_BASE_ADDR + 0x80000)
>  #define CAAM_BASE_ADDR              (ATZ2_BASE_ADDR)
>  #define ARM_BASE_ADDR		    (ATZ2_BASE_ADDR + 0x40000)
> +
> +#define CONFIG_SYS_FSL_SEC_ADDR     CAAM_BASE_ADDR
> +#define CONFIG_SYS_FSL_JR0_ADDR     (CAAM_BASE_ADDR + 0x1000)
> +
>  #define USB_PL301_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x0000)
>  #define USB_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x4000)
>  
> diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab
> index 43e64a2..e9340dd 100644
> --- a/doc/README.mxc_hab
> +++ b/doc/README.mxc_hab
> @@ -46,3 +46,51 @@ cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx
>  
>  NOTE: U-Boot_CSF.bin needs to be padded to the value specified in
>  the imximage.cfg file.
> +
> +Setup U-Boot Image for Encrypted Boot
> +-------------------------------------
> +An authenticated U-Boot image is used as starting point for
> +Encrypted Boot. The image is encrypted by Freescale's Code
> +Signing Tool (CST). The CST replaces only the image data of
> +u-boot.imx with the encrypted data. The Initial Vector Table,
> +DCD, and Boot data, remains in plaintext.
> +
> +The image data is encrypted with a Encryption Key (DEK).
> +Therefore, this key is needed to decrypt the data during the
> +booting process. The DEK is protected by wrapping it in a Blob,
> +which needs to be appended to the U-Boot image and specified in
> +the CSF file.
> +
> +The DEK blob is generated by an authenticated U-Boot image with
> +the dek_blob cmd enabled. The image used for DEK blob generation
> +needs to have the following configurations enabled:
> +
> +CONFIG_SECURE_BOOT
> +CONFIG_SYS_FSL_SEC_COMPAT    4 /* HAB version */
> +CONFIG_FSL_CAAM
> +CONFIG_CMD_DEKBLOB
> +
> +Note: The encrypted boot feature is only supported by HABv4 or
> +greater.
> +
> +The dek_blob command then can be used to generate the DEK blob of
> +a DEK previously loaded in memory. The command is used as follows:
> +
> +dek_blob <DEK address> <Output Address> <Key Size in Bits>
> +example: dek_blob 0x10800000 0x10801000 192
> +
> +The resulting DEK blob then is used to construct the encrypted
> +U-Boot image. Note that the blob needs to be transferred back
> +to the host.Then the following commands are used to construct
> +the final image.
> +
> +objcopy -I binary -O binary --pad-to 0x2000 --gap-fill=0x00 \
> +    U-Boot_CSF.bin U-Boot_CSF_pad.bin
> +cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx
> +objcopy -I binary -O binary --pad-to <blob_dst> --gap-fill=0x00 \
> +    u-boot-signed.imx u-boot-signed-pad.bin
> +cat u-boot-signed-pad.imx DEK_blob.bin > u-boot-encrypted.imx
> +
> +    NOTE: u-boot-signed.bin needs to be padded to the value
> +    equivalent to the address in which the DEK blob is specified
> +    in the CSF.
> diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile
> index c0cf642..4aa91e4 100644
> --- a/drivers/crypto/fsl/Makefile
> +++ b/drivers/crypto/fsl/Makefile
> @@ -8,5 +8,5 @@
>  
>  obj-y += sec.o
>  obj-$(CONFIG_FSL_CAAM) += jr.o fsl_hash.o jobdesc.o error.o
> -obj-$(CONFIG_CMD_BLOB) += fsl_blob.o
> +obj-$(CONFIG_CMD_BLOB)$(CONFIG_CMD_DEKBLOB) += fsl_blob.o
>  obj-$(CONFIG_RSA_FREESCALE_EXP) += fsl_rsa.o
> diff --git a/drivers/crypto/fsl/desc.h b/drivers/crypto/fsl/desc.h
> index 504f2b0..18e2ec8 100644
> --- a/drivers/crypto/fsl/desc.h
> +++ b/drivers/crypto/fsl/desc.h
> @@ -12,11 +12,18 @@
>  #ifndef DESC_H
>  #define DESC_H
>  
> +#define KEY_BLOB_SIZE		32
> +#define MAC_SIZE			16
> +
>  /* Max size of any CAAM descriptor in 32-bit words, inclusive of header */
>  #define MAX_CAAM_DESCSIZE	64
>  
> +/* Size of DEK Blob  descriptor, inclusive of header */
> +#define DEK_BLOB_DESCSIZE	9
> +
>  /* Block size of any entity covered/uncovered with a KEK/TKEK */
>  #define KEK_BLOCKSIZE		16
> +
>  /*
>   * Supported descriptor command types as they show up
>   * inside a descriptor command word.
> @@ -273,6 +280,13 @@
>  #define LDLEN_SET_OFIFO_OFFSET_MASK	(3 << LDLEN_SET_OFIFO_OFFSET_SHIFT)
>  
>  /*
> + * AAD Definitions
> + */
> +#define AES_KEY_SHIFT		8
> +#define LD_CCM_MODE		0x66
> +#define KEY_AES_SRC		(0x55 << AES_KEY_SHIFT)
> +
> +/*
>   * FIFO_LOAD/FIFO_STORE/SEQ_FIFO_LOAD/SEQ_FIFO_STORE
>   * Command Constructs
>   */
> @@ -418,6 +432,7 @@
>  #define OP_PCLID_MASK		(0xff << 16)
>  
>  /* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */
> +#define OP_PCLID_SECMEM		0x08
>  #define OP_PCLID_BLOB		(0x0d << OP_PCLID_SHIFT)
>  #define OP_PCLID_SECRETKEY	(0x11 << OP_PCLID_SHIFT)
>  #define OP_PCLID_PUBLICKEYPAIR	(0x14 << OP_PCLID_SHIFT)
> diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c
> index bc01075..a0bf6ff 100644
> --- a/drivers/crypto/fsl/fsl_blob.c
> +++ b/drivers/crypto/fsl/fsl_blob.c
> @@ -7,6 +7,8 @@
>  
>  #include <common.h>
>  #include <malloc.h>
> +#include <fsl_sec.h>
> +#include <asm-generic/errno.h>
>  #include "jobdesc.h"
>  #include "desc.h"
>  #include "jr.h"
> @@ -59,3 +61,53 @@ int blob_encrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len)
>  	free(desc);
>  	return ret;
>  }
> +
> +#ifdef CONFIG_CMD_DEKBLOB
> +int blob_dek(const u8 *src, u8 *dst, u8 len)
> +{
> +	int ret, size, i = 0;
> +	u32 *desc;
> +
> +	int out_sz =  WRP_HDR_SIZE + len + KEY_BLOB_SIZE + MAC_SIZE;
> +
> +	puts("\nEncapsulating provided DEK to form blob\n");
> +	desc = memalign(ARCH_DMA_MINALIGN,
> +			sizeof(uint32_t) * DEK_BLOB_DESCSIZE);
> +	if (!desc) {
> +		debug("Not enough memory for descriptor allocation\n");
> +		return -ENOMEM;
> +	}
> +
> +	ret = inline_cnstr_jobdesc_blob_dek(desc, src, dst, len);
> +	if (ret) {
> +		debug("Error in Job Descriptor Construction:  %d\n", ret);
> +	} else {
> +		size = roundup(sizeof(uint32_t) * DEK_BLOB_DESCSIZE,
> +			      ARCH_DMA_MINALIGN);
> +		flush_dcache_range((unsigned long)desc,
> +				   (unsigned long)desc + size);
> +		size = roundup(sizeof(uint8_t) * out_sz, ARCH_DMA_MINALIGN);
> +		flush_dcache_range((unsigned long)dst,
> +				   (unsigned long)dst + size);
> +
> +		ret = run_descriptor_jr(desc);
> +	}
> +
> +	if (ret) {
> +		debug("Error in Encapsulation %d\n", ret);
> +	   goto err;
> +	}
> +
> +	size = roundup(out_sz, ARCH_DMA_MINALIGN);
> +	invalidate_dcache_range((unsigned long)dst, (unsigned long)dst+size);
> +
> +	puts("DEK Blob\n");
> +	for (i = 0; i < out_sz; i++)
> +		printf("%02X", ((uint8_t *)dst)[i]);
> +	printf("\n");
> +
> +err:
> +	free(desc);
> +	return ret;
> +}
> +#endif
> diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c
> index cc0dced..5695bef 100644
> --- a/drivers/crypto/fsl/jobdesc.c
> +++ b/drivers/crypto/fsl/jobdesc.c
> @@ -9,12 +9,157 @@
>   */
>  
>  #include <common.h>
> +#include <fsl_sec.h>
>  #include "desc_constr.h"
>  #include "jobdesc.h"
>  #include "rsa_caam.h"
>  
> -#define KEY_BLOB_SIZE			32
> -#define MAC_SIZE			16
> +#ifdef CONFIG_MX6
> +/*!
> + * Secure memory run command
> + *
> + * @param   sec_mem_cmd  Secure memory command register
> + * @return  cmd_status  Secure memory command status register
> + */
> +uint32_t secmem_set_cmd(uint32_t sec_mem_cmd)
> +{
> +	uint32_t temp_reg;
> +
> +	sec_out32(CAAM_SMCJR0, sec_mem_cmd);
> +
> +	do {
> +		temp_reg = sec_in32(CAAM_SMCSJR0);
> +	} while (temp_reg & CMD_COMPLETE);
> +
> +	return temp_reg;
> +}
> +
> +/*!
> + * CAAM page allocation:
> + * Allocates a partition from secure memory, with the id
> + * equal to partion_num. This will de-allocate the page
> + * if it is already allocated. The partition will have
> + * full access permissions. The permissions are set before,
> + * running a job descriptor. A memory page of secure RAM
> + * is allocated for the partition.
> + *
> + * @param   page  Number of the page to allocate.
> + * @param   partition  Number of the partition to allocate.
> + * @return  0 on success, ERROR_IN_PAGE_ALLOC otherwise
> + */
> +int caam_page_alloc(uint8_t page_num, uint8_t partition_num)
> +{
> +	uint32_t temp_reg;
> +
> +	/*
> +	 * De-Allocate partition_num if already allocated to ARM core
> +	 */
> +	if (sec_in32(CAAM_SMPO_0) & PARTITION_OWNER(partition_num)) {
> +		temp_reg = secmem_set_cmd(PARTITION(partition_num) |
> +						CMD_PART_DEALLOC);
> +		if (temp_reg & SMCSJR_AERR) {
> +			printf("Error: De-allocation status 0x%X\n", temp_reg);
> +			return ERROR_IN_PAGE_ALLOC;
> +		}
> +	}
> +
> +	/* set the access rights to allow full access */
> +	sec_out32(CAAM_SMAG1JR0(partition_num), 0xF);
> +	sec_out32(CAAM_SMAG2JR0(partition_num), 0xF);
> +	sec_out32(CAAM_SMAPJR0(partition_num), 0xFF);
> +
> +	/* Now need to allocate partition_num of secure RAM. */
> +	/* De-Allocate page_num by starting with a page inquiry command */
> +	temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_INQUIRY);
> +
> +	/* if the page is owned, de-allocate it */
> +	if ((temp_reg & SMCSJR_PO) == PAGE_OWNED) {
> +		temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_PAGE_DEALLOC);
> +		if (temp_reg & SMCSJR_AERR) {
> +			printf("Error: Allocation status 0x%X\n", temp_reg);
> +			return ERROR_IN_PAGE_ALLOC;
> +		}
> +	}
> +
> +	/* Allocate page_num to partition_num */
> +	temp_reg = secmem_set_cmd(PAGE(page_num) | PARTITION(partition_num)
> +						| CMD_PAGE_ALLOC);
> +	if (temp_reg & SMCSJR_AERR) {
> +		printf("Error: Allocation status 0x%X\n", temp_reg);
> +		return ERROR_IN_PAGE_ALLOC;
> +	}
> +	/* page inquiry command to ensure that the page was allocated */
> +	temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_INQUIRY);
> +
> +	/* if the page is not owned => problem */
> +	if ((temp_reg & SMCSJR_PO) != PAGE_OWNED) {
> +		printf("Allocation of page %d in partition %d failed 0x%X\n",
> +		       temp_reg, page_num, partition_num);
> +
> +		return ERROR_IN_PAGE_ALLOC;
> +	}
> +
> +	return 0;
> +}
> +
> +int inline_cnstr_jobdesc_blob_dek(uint32_t *desc, const uint8_t *plain_txt,
> +				       uint8_t *dek_blob, uint32_t in_sz)
> +{
> +	uint32_t ret = 0;
> +	u32 aad_w1, aad_w2;
> +	/* output blob will have 32 bytes key blob in beginning and
> +	 * 16 byte HMAC identifier at end of data blob */
> +	uint32_t out_sz = in_sz + KEY_BLOB_SIZE + MAC_SIZE;
> +	/* Setting HDR for blob */
> +	uint8_t wrapped_key_hdr[8] = {HDR_TAG, 0x00, WRP_HDR_SIZE + out_sz,
> +			     HDR_PAR, HAB_MOD, HAB_ALG, in_sz, HAB_FLG};
> +
> +	/* initialize the blob array */
> +	memset(dek_blob, 0, out_sz + 8);
> +	/* Copy the header into the DEK blob buffer */
> +	memcpy(dek_blob, wrapped_key_hdr, sizeof(wrapped_key_hdr));
> +
> +	/* allocating secure memory */
> +	ret = caam_page_alloc(PAGE_1, PARTITION_1);
> +	if (ret)
> +		return ret;
> +
> +	/* Write DEK to secure memory */
> +	memcpy((uint32_t *)SEC_MEM_PAGE1, (uint32_t *)plain_txt, in_sz);
> +
> +	unsigned long start = (unsigned long)SEC_MEM_PAGE1 &
> +				~(ARCH_DMA_MINALIGN - 1);
> +	unsigned long end = ALIGN(start + 0x1000, ARCH_DMA_MINALIGN);
> +	flush_dcache_range(start, end);
> +
> +	/* Now configure the access rights of the partition */
> +	sec_out32(CAAM_SMAG1JR0(PARTITION_1), KS_G1); /* set group 1 */
> +	sec_out32(CAAM_SMAG2JR0(PARTITION_1), 0);     /* clear group 2 */
> +	sec_out32(CAAM_SMAPJR0(PARTITION_1), PERM);   /* set perm & locks */
> +
> +	/* construct aad for AES */
> +	aad_w1 = (in_sz << OP_ALG_ALGSEL_SHIFT) | KEY_AES_SRC | LD_CCM_MODE;
> +	aad_w2 = 0x0;
> +
> +	init_job_desc(desc, 0);
> +
> +	append_cmd(desc, CMD_LOAD | CLASS_2 | KEY_IMM | KEY_ENC |
> +				(0x0c << LDST_OFFSET_SHIFT) | 0x08);
> +
> +	append_u32(desc, aad_w1);
> +
> +	append_u32(desc, aad_w2);
> +
> +	append_cmd_ptr(desc, (dma_addr_t)SEC_MEM_PAGE1, in_sz, CMD_SEQ_IN_PTR);
> +
> +	append_cmd_ptr(desc, (dma_addr_t)dek_blob + 8, out_sz, CMD_SEQ_OUT_PTR);
> +
> +	append_operation(desc, OP_TYPE_ENCAP_PROTOCOL | OP_PCLID_BLOB |
> +						OP_PCLID_SECMEM);
> +
> +	return ret;
> +}
> +#endif
>  
>  void inline_cnstr_jobdesc_hash(uint32_t *desc,
>  			  const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
> diff --git a/drivers/crypto/fsl/jobdesc.h b/drivers/crypto/fsl/jobdesc.h
> index 84b3edd..112404c 100644
> --- a/drivers/crypto/fsl/jobdesc.h
> +++ b/drivers/crypto/fsl/jobdesc.h
> @@ -14,6 +14,20 @@
>  
>  #define KEY_IDNFR_SZ_BYTES		16
>  
> +#ifdef CONFIG_CMD_DEKBLOB
> +/* inline_cnstr_jobdesc_blob_dek:
> + * Intializes and constructs the job descriptor for DEK encapsulation
> + * using the given parameters.
> + * @desc: reference to the job descriptor
> + * @plain_txt: reference to the DEK
> + * @enc_blob: reference where to store the blob
> + * @in_sz: size in bytes of the DEK
> + * @return: 0 on success, ECONSTRJDESC otherwise
> + */
> +int inline_cnstr_jobdesc_blob_dek(uint32_t *desc, const uint8_t *plain_txt,
> +				uint8_t *enc_blob, uint32_t in_sz);
> +#endif
> +
>  void inline_cnstr_jobdesc_hash(uint32_t *desc,
>  			  const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
>  			  u32 alg_type, uint32_t alg_size, int sg_tbl);
> diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
> index f9d4938..f99d594 100644
> --- a/drivers/crypto/fsl/jr.c
> +++ b/drivers/crypto/fsl/jr.c
> @@ -90,11 +90,13 @@ static int jr_init(void)
>  	jr.liodn = DEFAULT_JR_LIODN;
>  #endif
>  	jr.size = JR_SIZE;
> -	jr.input_ring = (dma_addr_t *)malloc(JR_SIZE * sizeof(dma_addr_t));
> +	jr.input_ring = (dma_addr_t *)memalign(ARCH_DMA_MINALIGN,
> +				JR_SIZE * sizeof(dma_addr_t));
>  	if (!jr.input_ring)
>  		return -1;
>  	jr.output_ring =
> -	    (struct op_ring *)malloc(JR_SIZE * sizeof(struct op_ring));
> +	    (struct op_ring *)memalign(ARCH_DMA_MINALIGN,
> +				JR_SIZE * sizeof(struct op_ring));
>  	if (!jr.output_ring)
>  		return -1;
>  
> @@ -163,13 +165,23 @@ static int jr_enqueue(uint32_t *desc_addr,
>  	    CIRC_SPACE(jr.head, jr.tail, jr.size) <= 0)
>  		return -1;
>  
> -	jr.input_ring[head] = desc_phys_addr;
>  	jr.info[head].desc_phys_addr = desc_phys_addr;
>  	jr.info[head].desc_addr = (uint32_t)desc_addr;
>  	jr.info[head].callback = (void *)callback;
>  	jr.info[head].arg = arg;
>  	jr.info[head].op_done = 0;
>  
> +	unsigned long start = (unsigned long)&jr.info[head] &
> +					~(ARCH_DMA_MINALIGN - 1);
> +	unsigned long end = ALIGN(start + sizeof(struct jr_info),
> +					ARCH_DMA_MINALIGN);
> +	flush_dcache_range(start, end);
> +
> +	jr.input_ring[head] = desc_phys_addr;
> +	start = (unsigned long)&jr.input_ring[head] & ~(ARCH_DMA_MINALIGN - 1);
> +	end = ALIGN(start + sizeof(dma_addr_t), ARCH_DMA_MINALIGN);
> +	flush_dcache_range(start, end);
> +
>  	jr.head = (head + 1) & (jr.size - 1);
>  
>  	sec_out32(&regs->irja, 1);
> @@ -187,6 +199,13 @@ static int jr_dequeue(void)
>  	void *arg = NULL;
>  
>  	while (sec_in32(&regs->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) {
> +		unsigned long start = (unsigned long)jr.output_ring &
> +					~(ARCH_DMA_MINALIGN - 1);
> +		unsigned long end = ALIGN(start +
> +					  sizeof(struct op_ring)*JR_SIZE,
> +					  ARCH_DMA_MINALIGN);
> +		invalidate_dcache_range(start, end);
> +
>  		found = 0;
>  
>  		dma_addr_t op_desc = jr.output_ring[jr.tail].desc;
> @@ -333,13 +352,17 @@ static int instantiate_rng(void)
>  
>  	memset(&op, 0, sizeof(struct result));
>  
> -	desc = malloc(sizeof(int) * 6);
> +	desc = memalign(ARCH_DMA_MINALIGN, sizeof(uint32_t) * 6);
>  	if (!desc) {
>  		printf("cannot allocate RNG init descriptor memory\n");
>  		return -1;
>  	}
>  
>  	inline_cnstr_jobdesc_rng_instantiation(desc);
> +	int size = roundup(sizeof(uint32_t) * 6, ARCH_DMA_MINALIGN);
> +	flush_dcache_range((unsigned long)desc,
> +			   (unsigned long)desc + size);
> +
>  	ret = run_descriptor_jr(desc);
>  
>  	if (ret)
> diff --git a/include/fsl_sec.h b/include/fsl_sec.h
> index aa850a3..cc5731f 100644
> --- a/include/fsl_sec.h
> +++ b/include/fsl_sec.h
> @@ -11,6 +11,13 @@
>  #include <common.h>
>  #include <asm/io.h>
>  
> +#ifdef CONFIG_ARM
> +#define sec_in32(a)       __raw_readl(a)
> +#define sec_out32(a, v)   __raw_writel(v, a)
> +#define sec_in16(a)       __raw_readw(a)
> +#define sec_clrbits32     clrbits_le32
> +#define sec_setbits32     setbits_le32
> +#elif CONFIG_PPC
>  #ifdef CONFIG_SYS_FSL_SEC_LE
>  #define sec_in32(a)       in_le32(a)
>  #define sec_out32(a, v)   out_le32(a, v)
> @@ -26,6 +33,7 @@
>  #else
>  #error Neither CONFIG_SYS_FSL_SEC_LE nor CONFIG_SYS_FSL_SEC_BE is defined
>  #endif
> +#endif      /* ARCHITECTURE */
>  
>  /* Security Engine Block (MS = Most Sig., LS = Least Sig.) */
>  #if CONFIG_SYS_FSL_SEC_COMPAT >= 4
> @@ -175,7 +183,79 @@ struct jr_regs {
>  	u32 jrcr;
>  };
>  
> +#ifdef CONFIG_MX6
> +/* CAAM Job Ring 0 Registers */
> +/* Secure Memory Partition Owner register */
> +#define SMCSJR_PO		(3 << 6)
> +/* JR Allocation Error */
> +#define SMCSJR_AERR		(3 << 12)
> +/* Secure memory partition 0 page 0 owner register */
> +#define CAAM_SMPO_0		CONFIG_SYS_FSL_SEC_ADDR + 0x1FBC
> +/* Secure memory command register */
> +#define CAAM_SMCJR0		CONFIG_SYS_FSL_SEC_ADDR + 0x10f4
> +/* Secure memory command status register */
> +#define CAAM_SMCSJR0		CONFIG_SYS_FSL_SEC_ADDR + 0x10fc
> +/* Secure memory access permissions register */
> +#define CAAM_SMAPJR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x1104 + y*16)
> +/* Secure memory access group 2 register */
> +#define CAAM_SMAG2JR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x1108 + y*16)
> +/* Secure memory access group 1 register */
> +#define CAAM_SMAG1JR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x110C + y*16)
> +
> +/* Commands and macros for secure memory */
> +#define CMD_PAGE_ALLOC		0x1
> +#define CMD_PAGE_DEALLOC	0x2
> +#define CMD_PART_DEALLOC	0x3
> +#define CMD_INQUIRY		0x5
> +#define CMD_COMPLETE		(3 << 14)
> +#define PAGE_AVAILABLE		0
> +#define PAGE_OWNED		(3 << 6)
> +#define PAGE(x)			(x << 16)
> +#define PARTITION(x)		(x << 8)
> +#define PARTITION_OWNER(x)	(0x3 << (x*2))
> +
> +/* Address of secure 4kbyte pages */
> +#define SEC_MEM_PAGE0		CAAM_ARB_BASE_ADDR
> +#define SEC_MEM_PAGE1		(CAAM_ARB_BASE_ADDR + 0x1000)
> +#define SEC_MEM_PAGE2		(CAAM_ARB_BASE_ADDR + 0x2000)
> +#define SEC_MEM_PAGE3		(CAAM_ARB_BASE_ADDR + 0x3000)
> +
> +#define JR_MID			2               /* Matches ROM configuration */
> +#define KS_G1			(1 << JR_MID)   /* CAAM only */
> +#define PERM			0x0000B008      /* Clear on release, lock SMAP
> +						 * lock SMAG group 1 Blob */
> +
> +#define BLOB_SIZE(x)       (x + 32 + 16) /* Blob buffer size */
> +
> +/* HAB WRAPPED KEY header */
> +#define WRP_HDR_SIZE		0x08
> +#define HDR_TAG			0x81
> +#define HDR_PAR			0x41
> +/* HAB WRAPPED KEY Data */
> +#define HAB_MOD			0x66
> +#define HAB_ALG			0x55
> +#define HAB_FLG			0x00
> +
> +/* Partition and Page IDs */
> +#define PARTITION_1	1
> +#define PAGE_1			1
> +
> +#define ERROR_IN_PAGE_ALLOC	1
> +#define ECONSTRJDESC   -1
> +
> +#endif
> +
>  int sec_init(void);
> +
> +/* blob_dek:
> + * Encapsulates the src in a secure blob and stores it dst
> + * @src: reference to the plaintext
> + * @dst: reference to the output adrress
> + * @len: size in bytes of src
> + * @return: 0 on success, error otherwise
> + */
> +int blob_dek(const u8 *src, u8 *dst, u8 len);
> +
>  #endif
>  
>  #endif /* __FSL_SEC_H */
> 

Apart of that:

Reviewed-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list