[U-Boot] [PATCH] usb: gadget: fastboot: make high-speed work

Steve Rae srae at broadcom.com
Thu Feb 19 20:20:10 CET 2015


Hi Matt:

On 15-02-19 10:25 AM, Matt Reimer wrote:
> Make fastboot work in high-speed mode by specifying separate sets
> of usb_descriptor_headers for full-speed and high-speed.
>
> Tested on s5p_ds5.
>
> Signed-off-by: Matt Reimer <mreimer at sdgsystems.com>
> ---
>   drivers/usb/gadget/f_fastboot.c |   27 ++++++++++++++++++++++++---
>   1 file changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index 310175a..024ef20 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -74,6 +74,15 @@ static struct usb_endpoint_descriptor fs_ep_out = {
>   	.bInterval		= 0x00,
>   };
>
> +static struct usb_endpoint_descriptor hs_ep_in = {
> +	.bLength		= USB_DT_ENDPOINT_SIZE,
> +	.bDescriptorType	= USB_DT_ENDPOINT,
> +	.bEndpointAddress	= USB_DIR_IN,
> +	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
> +	.wMaxPacketSize		= RX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0,
> +	.bInterval		= 0x00,
> +};
> +

Are you certain that you have the "in" and "out" correct?
Looking at the three existing "usb_endpoint_descriptors"
	fs_ep_in
	fs_ep_out
	hs_ep_out
The "in" is for sending data from the device TO the host, and
the "out" is for receiving data FROM the host.
The maximum packet size changes between 1.1 and 2.0 for receiving 
packets (on the "out" endpoint), but AFAIK the maximum packet size is 
the same for 1.1 and 2.0 (hence the fs_ep_in is used for both fs AND hs)....
This change suggests that the maximum packet size for sending packets TO 
the host has changed as well - if it has, then the define in hs_ep_in 
(above) needs to be:
	.wMaxPacketSize		= TX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0,
in order to avoid confusion....
Thanks, Steve

>   static struct usb_endpoint_descriptor hs_ep_out = {
>   	.bLength		= USB_DT_ENDPOINT_SIZE,
>   	.bDescriptorType	= USB_DT_ENDPOINT,
> @@ -94,9 +103,16 @@ static struct usb_interface_descriptor interface_desc = {
>   	.bInterfaceProtocol	= FASTBOOT_INTERFACE_PROTOCOL,
>   };
>
> -static struct usb_descriptor_header *fb_runtime_descs[] = {
> +static struct usb_descriptor_header *fb_fs_runtime_descs[] = {
>   	(struct usb_descriptor_header *)&interface_desc,
>   	(struct usb_descriptor_header *)&fs_ep_in,
> +	(struct usb_descriptor_header *)&fs_ep_out,
> +	NULL,
> +};
> +
> +static struct usb_descriptor_header *fb_hs_runtime_descs[] = {
> +	(struct usb_descriptor_header *)&interface_desc,
> +	(struct usb_descriptor_header *)&hs_ep_in,
>   	(struct usb_descriptor_header *)&hs_ep_out,
>   	NULL,
>   };
> @@ -160,6 +176,7 @@ static int fastboot_bind(struct usb_configuration *c, struct usb_function *f)
>   	f_fb->out_ep->driver_data = c->cdev;
>
>   	hs_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
> +	hs_ep_in.bEndpointAddress = fs_ep_in.bEndpointAddress;
>
>   	return 0;
>   }
> @@ -236,7 +253,10 @@ static int fastboot_set_alt(struct usb_function *f,
>   	}
>   	f_fb->out_req->complete = rx_handler_command;
>
> -	ret = usb_ep_enable(f_fb->in_ep, &fs_ep_in);
> +	if (gadget->speed == USB_SPEED_HIGH)
> +		ret = usb_ep_enable(f_fb->in_ep, &hs_ep_in);
> +	else
> +		ret = usb_ep_enable(f_fb->in_ep, &fs_ep_in);
>   	if (ret) {
>   		puts("failed to enable in ep\n");
>   		goto err;
> @@ -277,7 +297,8 @@ static int fastboot_add(struct usb_configuration *c)
>   	}
>
>   	f_fb->usb_function.name = "f_fastboot";
> -	f_fb->usb_function.hs_descriptors = fb_runtime_descs;
> +	f_fb->usb_function.descriptors = fb_fs_runtime_descs;
> +	f_fb->usb_function.hs_descriptors = fb_hs_runtime_descs;
>   	f_fb->usb_function.bind = fastboot_bind;
>   	f_fb->usb_function.unbind = fastboot_unbind;
>   	f_fb->usb_function.set_alt = fastboot_set_alt;
>


More information about the U-Boot mailing list