[U-Boot] [PATCH] spi: designware_spi: Fix detecting FIFO depth

[Stefan Roese]

On 06.01.2015 01:08, Axel Lin wrote:
> Current code tries to find the highest valid fifo depth by checking the value
> it wrote to DW_SPI_TXFLTR. There are a few problems in current code:
> 1) There is an off-by-one in dws->fifo_len setting because it assumes the latest
>     register write fails so the latest valid value should be fifo - 1.
> 2) We know the depth could be from 2 to 256 from HW spec, so it is not necessary
>     to test fifo == 257. In the case fifo is 257, it means the latest valid
>     setting is fifo = 256. So after the for loop iteration, we should check
>     fifo == 2 case instead of fifo == 257 if detecting the FIFO depth fails.
> This patch fixes above issues.
>
> Signed-off-by: Axel Lin <axel.lin at ingics.com>

Acked-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan