[U-Boot] [PATCH] mx25: Remove empty line after printing the reset cause

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Currently there is an unneeded empty line after printing the reset cause:

U-Boot 2015.01-rc4-00080-g0551a93 (Jan 06 2015 - 13:04:19)                      
                                                                                
CPU:   Freescale i.MX25 rev1.2 at 399 MHz                                       
Reset cause: POR                                                                
                                                                                
Board: MX25PDK                                                                  
I2C:   ready                                                                    
DRAM:  64 MiB                                                                   
MMC:   FSL_SDHC: 0

Remove the extra "\n" when printing the reset cause.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index 4e9c0b5..8912098 100644
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -181,7 +181,7 @@ int print_cpuinfo(void)
 		(cpurev & 0xF0) >> 4, (cpurev & 0x0F),
 		((cpurev & 0x8000) ? " unknown" : ""),
 		strmhz(buf, imx_get_armclk()));
-	printf("Reset cause: %s\n\n", get_reset_cause());
+	printf("Reset cause: %s\n", get_reset_cause());
 	return 0;
 }
 #endif
-- 
1.9.1