[U-Boot] mx25: Remove empty line after printing the reset cause

[Tom Rini]

On Tue, Jan 06, 2015 at 02:10:05PM -0200, Fabio Estevam wrote:

> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Currently there is an unneeded empty line after printing the reset cause:
> 
> U-Boot 2015.01-rc4-00080-g0551a93 (Jan 06 2015 - 13:04:19)                      
>                                                                                 
> CPU:   Freescale i.MX25 rev1.2 at 399 MHz                                       
> Reset cause: POR                                                                
>                                                                                 
> Board: MX25PDK                                                                  
> I2C:   ready                                                                    
> DRAM:  64 MiB                                                                   
> MMC:   FSL_SDHC: 0
> 
> Remove the extra "\n" when printing the reset cause.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150109/f1686b26/attachment.pgp>