[U-Boot] U-Boot warnings on Nokia N900

Pali Rohár pali.rohar at gmail.com
Thu Jan 15 10:18:01 CET 2015


On Thursday 15 January 2015 10:07:05 Pali Rohár wrote:
> Hello,
> 
> when starting U-Boot (from git master) on Nokia N900 it show
> lot of these lines on N900 screen:
> 
> Timed out in wait_for_event: status=0000
> Check if pads/pull-ups of bus 1 are properly configured
> Timed out in wait_for_event: status=0000
> Check if pads/pull-ups of bus 1 are properly configured
> ...
> i2c_read (addr phase): pads on bus 1 probably not configured
> (status=0x10)
> i2c_write: timeout writing last byte!
> 
> But booting linux kernel working without problem. What above
> warning messages means? They were not in U-Boot 2013.04
> version.

Ok, these warning/error lines are generated by this code:

	/* reset lp5523 led */
	i2c_set_bus_num(1);
	state = 0xff;
	i2c_write(0x32, 0x3d, 1, &state, 1);
	i2c_set_bus_num(0);

in function misc_init_r() in file board/nokia/rx51/rx51.c

Above code worked fine in U-Boot 2013.04 and now in U-Boot from 
git master it generates warnings/errors. Why?

-- 
Pali Rohár
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150115/bd4980ad/attachment.pgp>


More information about the U-Boot mailing list