[U-Boot] U-Boot warnings on Nokia N900

[Tom Rini]

On Thu, Jan 15, 2015 at 10:18:01AM +0100, Pali Rohár wrote:
> On Thursday 15 January 2015 10:07:05 Pali Rohár wrote:
> > Hello,
> > 
> > when starting U-Boot (from git master) on Nokia N900 it show
> > lot of these lines on N900 screen:
> > 
> > Timed out in wait_for_event: status=0000
> > Check if pads/pull-ups of bus 1 are properly configured
> > Timed out in wait_for_event: status=0000
> > Check if pads/pull-ups of bus 1 are properly configured
> > ...
> > i2c_read (addr phase): pads on bus 1 probably not configured
> > (status=0x10)
> > i2c_write: timeout writing last byte!
> > 
> > But booting linux kernel working without problem. What above
> > warning messages means? They were not in U-Boot 2013.04
> > version.
> 
> Ok, these warning/error lines are generated by this code:
> 
> 	/* reset lp5523 led */
> 	i2c_set_bus_num(1);
> 	state = 0xff;
> 	i2c_write(0x32, 0x3d, 1, &state, 1);
> 	i2c_set_bus_num(0);
> 
> in function misc_init_r() in file board/nokia/rx51/rx51.c
> 
> Above code worked fine in U-Boot 2013.04 and now in U-Boot from 
> git master it generates warnings/errors. Why?

Sadly I think you'll have to git bisect to see just when things changed.
This area of code is a bit finicky to say the least.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150120/aff4f43c/attachment.pgp>