[U-Boot] [PATCH v2 0/3] pmic:pfuze support buck regulator mode switch

[Peng Fan]

This patch set is to support buck regulator can
working in different switching modes. To improve
system efficiency the buck regulators can operate
in different switching modes.

patch 1/3 is to add related bit definitions and registers.
patch 2/3 is to implement the switching mode init function.
patch 3/3 is to add related mode init function in board code.

mx6slevk board is not included in this patch set, since power
and i2c interface are not implemented for it. Future patch will
cover this to add PAD setting, power_init_board and etc.

Changes v2:
 implement set mode for each regulator

Peng Fan (3):
  pmic:pfuz100 add switch mode and more registers
  pmic:pfuze implement pmic_mode_init
  imx:mx6 set normal APS and standby PFM mode

 board/freescale/common/pfuze.c                | 43 ++++++++++++++++++++++
 board/freescale/common/pfuze.h                |  2 +
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  6 +++
 board/freescale/mx6sabresd/mx6sabresd.c       |  6 ++-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c   |  6 ++-
 include/power/pfuze100_pmic.h                 | 53 +++++++++++++++++++++++++++
 6 files changed, 114 insertions(+), 2 deletions(-)

-- 
1.8.4