[U-Boot] [PATCH] arm: ls102xa: Update snoop settings for CCI-400

[York Sun]

On 01/15/2015 03:29 AM, Alison Wang wrote:
> CAAM is connected to CCI-400 S0 slave interface. Disable snooping for
> S0 will cause CAAM self test failure. This patch is to enable snooping
> for S0 slave interface. These CCI-400 operations are moved to
> board_early_init_f() to be initialized earlier. For S4 slave interface,
> issuing of snoop requests and DVM message requests are enabled.
> 
> Signed-off-by: Alison Wang <alison.wang at freescale.com>
> ---

Applied to u-boot-fsl-qoriq master branch, awaiting upstream.

York