[U-Boot] [PATCH] arm: ls102xa: Update snoop settings for CCI-400

[Huan Wang]

York,

> On 01/15/2015 01:29 AM, Alison Wang wrote:
> > CAAM is connected to CCI-400 S0 slave interface. Disable snooping for
> > S0 will cause CAAM self test failure. This patch is to enable
> snooping
> > for S0 slave interface. These CCI-400 operations are moved to
> > board_early_init_f() to be initialized earlier. For S4 slave
> > interface, issuing of snoop requests and DVM message requests are
> enabled.
> >
> > Signed-off-by: Alison Wang <alison.wang at freescale.com>
> > ---
> 
> It should be prefixed with v2 and have a change log. Please do that for
> future patches.
>
[Alison Wang] Ok. Thanks.


Best Regards,
Alison Wang