[U-Boot] [PATCH 05/12] sunxi: Move setting of CPU system control register SMP bit to save_boot_params

[Ian Campbell]

On Thu, 2015-01-15 at 15:52 +0100, Hans de Goede wrote:
> According to the "Cortex-A7 MPCore Technical Reference Manual":
> 
> "You must ensure this bit is set to 1 before the caches and MMU are enabled,
> or any cache and TLB maintenance operations are performed."

Given that this is a feature of the Cortex-A7 (actually, I believe it
applies to at least Cortex-A15 too) and not really specific to sunxi,
perhaps we can make this more generic?

> Since arch/arm/cpu/armv7/start.S: cpu_init_cp15 does several cache operations,
> we should thus enable the SMP bit earlier, and the only chance to do that is
> to do it at save_boot_params time.

Would it be so terrible to add an ifdef CORTEX_A7 here, or to call out
to (or call as a macro) a soc_init_cp15?

I'm cc-ing Albert for input these questions.

FWIW I notice there is some OMAP specific code right before the "bl
cpu_init_cp15", although that looks like an even more special case, so
perhaps not really precedent.

> This does not seem to make any noticable difference, but:

"noticeable"

> 1) According to the manual it is the right thing to do
> 2) We need to do other magic really early on for sun9i (A80) support, so we
>    need to introduce a lowlevel_init.S / save_boot_params function anyways
> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  arch/arm/cpu/armv7/sunxi/Makefile        |  1 +
>  arch/arm/cpu/armv7/sunxi/board.c         |  8 --------
>  arch/arm/cpu/armv7/sunxi/lowlevel_init.S | 23 +++++++++++++++++++++++
>  3 files changed, 24 insertions(+), 8 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/sunxi/lowlevel_init.S
> 
> diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
> index 1720f7d..3a6aa6d 100644
> --- a/arch/arm/cpu/armv7/sunxi/Makefile
> +++ b/arch/arm/cpu/armv7/sunxi/Makefile
> @@ -7,6 +7,7 @@
>  #
>  # SPDX-License-Identifier:	GPL-2.0+
>  #
> +obj-y	+= lowlevel_init.o
>  obj-y	+= timer.o
>  obj-y	+= board.o
>  obj-y	+= clock.o
> diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
> index bc98c56..4449942 100644
> --- a/arch/arm/cpu/armv7/sunxi/board.c
> +++ b/arch/arm/cpu/armv7/sunxi/board.c
> @@ -120,14 +120,6 @@ void s_init(void)
>  	 * access gets messed up (seems cache related) */
>  	setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
>  #endif
> -#if !defined CONFIG_SPL_BUILD && (defined CONFIG_MACH_SUN7I || \
> -		defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I)
> -	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
> -	asm volatile(
> -		"mrc p15, 0, r0, c1, c0, 1\n"
> -		"orr r0, r0, #1 << 6\n"
> -		"mcr p15, 0, r0, c1, c0, 1\n");
> -#endif
>  
>  	clock_init();
>  	timer_init();
> diff --git a/arch/arm/cpu/armv7/sunxi/lowlevel_init.S b/arch/arm/cpu/armv7/sunxi/lowlevel_init.S
> new file mode 100644
> index 0000000..b80b3eb
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/sunxi/lowlevel_init.S
> @@ -0,0 +1,23 @@
> +/*
> + * (C) Copyright 2015 Hans de Goede <hdegoede at redhat.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <config.h>
> +#include <version.h>
> +#include <linux/linkage.h>
> +
> +/*
> + * On sunxi we need to do some setup *before* cpu_init_cp15 from start.S
> + * runs, we (ab)use save_boot_params for this.
> + */
> +ENTRY(save_boot_params)
> +#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN7I || \
> +    defined CONFIG_MACH_SUN8I
> +	mrc	p15, 0, r0, c1, c0, 1
> +	orr	r0, r0, #(1<<6)
> +	mcr	p15, 0, r0, c1, c0, 1
> +#endif
> +	bx	lr
> +ENDPROC(save_boot_params)