[U-Boot] [PATCH] sunxi: display: Make lcd display clk phase configurable

[Ian Campbell]

On Tue, 2015-01-13 at 13:33 +0100, Hans de Goede wrote:
> While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module
> I noticed that the screen flickered. This is caused by the lcd display clk
> phase reg value being set to 0, where it should be 1 in this setup.
> 
> This commit adds a Kconfig option for the lcd display clk phase, so that we
> can set it per board. This defaults to 1, because looking at all the fex
> files in sunxi-boards, that is by far the most used value.
> 
> This commit updated the Ippo and MSI Primo73 tablet defconfigs to override the
> default of 1 with 0, as that is the correct value for those tablets, this
> keeps the register settings the same as before this commit.
> 
> The Olinuxino-A13 defconfigs are not updated, changing the register setting
> for these boards from 0 to 1, this is intentional.
> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>

Could've sworn I replied to this one, but apparently not:
Acked-by: Ian Campbell <ijc at hellion.org.uk>