[U-Boot] [PATCH] sunxi: display: Make lcd display clk phase configurable

[Simon Glass]

Hi Hans,

On 13 January 2015 at 04:33, Hans de Goede <hdegoede at redhat.com> wrote:
> While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module
> I noticed that the screen flickered. This is caused by the lcd display clk
> phase reg value being set to 0, where it should be 1 in this setup.
>
> This commit adds a Kconfig option for the lcd display clk phase, so that we
> can set it per board. This defaults to 1, because looking at all the fex
> files in sunxi-boards, that is by far the most used value.
>
> This commit updated the Ippo and MSI Primo73 tablet defconfigs to override the
> default of 1 with 0, as that is the correct value for those tablets, this
> keeps the register settings the same as before this commit.
>
> The Olinuxino-A13 defconfigs are not updated, changing the register setting
> for these boards from 0 to 1, this is intentional.
>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  arch/arm/include/asm/arch-sunxi/display.h | 4 +---
>  board/sunxi/Kconfig                       | 7 +++++++
>  configs/Ippo_q8h_v1_2_defconfig           | 1 +
>  configs/Ippo_q8h_v5_defconfig             | 1 +
>  configs/MSI_Primo73_defconfig             | 1 +
>  drivers/video/sunxi_display.c             | 7 +------
>  6 files changed, 12 insertions(+), 9 deletions(-)

Are you planning to move this to device tree at some point?

Regards,
Simon