[U-Boot] [PATCH 01/23] x86: Enhance the microcode tool to support header files as input
Simon Glass
sjg at chromium.org
Tue Jan 27 02:22:59 CET 2015
Sometimes microcode is delivered as a header file. Allow the tool to
support this as well as collecting multiple microcode blocks into a
single update.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
tools/microcode-tool.py | 90 ++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 70 insertions(+), 20 deletions(-)
diff --git a/tools/microcode-tool.py b/tools/microcode-tool.py
index 003716d..71c2e91 100755
--- a/tools/microcode-tool.py
+++ b/tools/microcode-tool.py
@@ -76,6 +76,35 @@ def ParseFile(fname):
microcodes[name] = Microcode(name, data)
return date, license_text, microcodes
+def ParseHeaderFiles(fname_list):
+ """Parse a list of header files and return the component parts
+
+ Args:
+ fname_list: List of files to parse
+ Returns:
+ date: String containing date from the file's header
+ license_text: List of text lines for the license file
+ microcodes: List of Microcode objects from the file
+ """
+ microcodes = {}
+ license_text = []
+ date = ''
+ name = None
+ for fname in fname_list:
+ name = os.path.basename(fname).lower()
+ name = os.path.splitext(name)[0]
+ data = []
+ with open(fname) as fd:
+ for line in fd:
+ line = line.rstrip()
+
+ # Omit anything after the last comma
+ words = line.split(',')[:-1]
+ data += [word + ',' for word in words]
+ microcodes[name] = Microcode(name, data)
+ return date, license_text, microcodes
+
+
def List(date, microcodes, model):
"""List the available microcode chunks
@@ -129,13 +158,13 @@ def FindMicrocode(microcodes, model):
break
return found, tried
-def CreateFile(date, license_text, mcode, outfile):
+def CreateFile(date, license_text, mcodes, outfile):
"""Create a microcode file in U-Boot's .dtsi format
Args:
date: String containing date of original microcode file
license: List of text lines for the license file
- mcode: Microcode object to write
+ mcodes: Microcode objects to write (normally only 1)
outfile: Filename to write to ('-' for stdout)
"""
out = '''/*%s
@@ -159,15 +188,22 @@ intel,processor-flags = <%#x>;
data = <%s
\t>;'''
words = ''
- for i in range(len(mcode.words)):
- if not (i & 3):
- words += '\n'
- val = mcode.words[i]
- # Change each word so it will be little-endian in the FDT
- # This data is needed before RAM is available on some platforms so we
- # cannot do an endianness swap on boot.
- val = struct.unpack("<I", struct.pack(">I", val))[0]
- words += '\t%#010x' % val
+ add_comments = len(mcodes) > 1
+ for mcode in mcodes:
+ if add_comments:
+ words += '\n/* %s */' % mcode.name
+ for i in range(len(mcode.words)):
+ if not (i & 3):
+ words += '\n'
+ val = mcode.words[i]
+ # Change each word so it will be little-endian in the FDT
+ # This data is needed before RAM is available on some platforms so
+ # we cannot do an endianness swap on boot.
+ val = struct.unpack("<I", struct.pack(">I", val))[0]
+ words += '\t%#010x' % val
+
+ # Use the first microcode for the headers
+ mcode = mcodes[0]
# Take care to avoid adding a space before a tab
text = ''
@@ -187,8 +223,8 @@ data = <%s
print >> sys.stderr, "Creating directory '%s'" % MICROCODE_DIR
os.makedirs(MICROCODE_DIR)
outfile = os.path.join(MICROCODE_DIR, mcode.name + '.dtsi')
- print >> sys.stderr, "Writing microcode for '%s' to '%s'" % (
- mcode.name, outfile)
+ print >> sys.stderr, "Writing microcode for '%s' to '%s'" % (
+ ', '.join([mcode.name for mcode in mcodes]), outfile)
with open(outfile, 'w') as fd:
print >> fd, out % tuple(args)
@@ -198,8 +234,12 @@ def MicrocodeTool():
parser = OptionParser()
parser.add_option('-d', '--mcfile', type='string', action='store',
help='Name of microcode.dat file')
+ parser.add_option('-H', '--headerfile', type='string', action='append',
+ help='Name of .h file containing microcode')
parser.add_option('-m', '--model', type='string', action='store',
- help='Model name to extract')
+ help="Model name to extract ('all' for all)")
+ parser.add_option('-M', '--multiple', type='string', action='store',
+ help="Allow output of multiple models")
parser.add_option('-o', '--outfile', type='string', action='store',
help='Filename to use for output (- for stdout), default is'
' %s/<name>.dtsi' % MICROCODE_DIR)
@@ -224,9 +264,14 @@ def MicrocodeTool():
if cmd not in commands:
parser.error("Unknown command '%s'" % cmd)
- if not options.mcfile:
- parser.error('You must specify a microcode file')
- date, license_text, microcodes = ParseFile(options.mcfile)
+ if (not not options.mcfile) != (not not options.mcfile):
+ parser.error("You must specify either header files or a microcode file, not both")
+ if options.headerfile:
+ date, license_text, microcodes = ParseHeaderFiles(options.headerfile)
+ elif options.mcfile:
+ date, license_text, microcodes = ParseFile(options.mcfile)
+ else:
+ parser.error('You must specify a microcode file (or header files)')
if cmd == 'list':
List(date, microcodes, options.model)
@@ -236,16 +281,21 @@ def MicrocodeTool():
if not options.model:
parser.error('You must specify a model to create')
model = options.model.lower()
- mcode_list, tried = FindMicrocode(microcodes, model)
+ if options.model == 'all':
+ options.multiple = True
+ mcode_list = microcodes.values()
+ tried = []
+ else:
+ mcode_list, tried = FindMicrocode(microcodes, model)
if not mcode_list:
parser.error("Unknown model '%s' (%s) - try 'list' to list" %
(model, ', '.join(tried)))
- if len(mcode_list) > 1:
+ if not options.multiple and len(mcode_list) > 1:
parser.error("Ambiguous model '%s' (%s) matched %s - try 'list' "
"to list or specify a particular file" %
(model, ', '.join(tried),
', '.join([m.name for m in mcode_list])))
- CreateFile(date, license_text, mcode_list[0], options.outfile)
+ CreateFile(date, license_text, mcode_list, options.outfile)
else:
parser.error("Unknown command '%s'" % cmd)
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list