[U-Boot] [v4 08/10] spi: cadence_qspi: get sram size from device tree

[Vikas Manocha]

sram size could be different on different socs, e.g. on stv0991 it is 256 while
on altera platform it is 128. It is better to receive it from device tree.

Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
Tested-by: Stefan Roese <sr at denx.de>
---

Changes in v4: None
Changes in v3: Rebased to spi-next-dev
Changes in v2: None

 arch/arm/dts/socfpga.dtsi      |    1 +
 arch/arm/dts/stv0991.dts       |    1 +
 drivers/spi/cadence_qspi.c     |    1 +
 drivers/spi/cadence_qspi.h     |    1 +
 drivers/spi/cadence_qspi_apb.c |    6 +-----
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/dts/socfpga.dtsi b/arch/arm/dts/socfpga.dtsi
index bf791c5..9b12420 100644
--- a/arch/arm/dts/socfpga.dtsi
+++ b/arch/arm/dts/socfpga.dtsi
@@ -639,6 +639,7 @@
 			ext-decoder = <0>;  /* external decoder */
 			num-cs = <4>;
 			fifo-depth = <128>;
+			sram-size = <128>;
 			bus-num = <2>;
 			status = "disabled";
 		};
diff --git a/arch/arm/dts/stv0991.dts b/arch/arm/dts/stv0991.dts
index 3b1efca..556df82 100644
--- a/arch/arm/dts/stv0991.dts
+++ b/arch/arm/dts/stv0991.dts
@@ -35,6 +35,7 @@
 			ext-decoder = <0>; /* external decoder */
 			num-cs = <4>;
 			fifo-depth = <256>;
+			sram-size = <256>;
 			bus-num = <0>;
 			status = "okay";
 
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index a75fc46..34a0f46 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -309,6 +309,7 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
 	plat->tsd2d_ns = fdtdec_get_int(blob, subnode, "tsd2d-ns", 255);
 	plat->tchsh_ns = fdtdec_get_int(blob, subnode, "tchsh-ns", 20);
 	plat->tslch_ns = fdtdec_get_int(blob, subnode, "tslch-ns", 20);
+	plat->sram_size = fdtdec_get_int(blob, node, "sram-size", 128);
 
 	debug("%s: regbase=%p ahbbase=%p max-frequency=%d page-size=%d\n",
 	      __func__, plat->regbase, plat->ahbbase, plat->max_hz,
diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h
index c9a6142..98e57aa 100644
--- a/drivers/spi/cadence_qspi.h
+++ b/drivers/spi/cadence_qspi.h
@@ -25,6 +25,7 @@ struct cadence_spi_platdata {
 	u32		tsd2d_ns;
 	u32		tchsh_ns;
 	u32		tslch_ns;
+	u32		sram_size;
 };
 
 struct cadence_spi_priv {
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index f2c22af..cbf0d42 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -36,9 +36,6 @@
 
 #define CQSPI_FIFO_WIDTH			(4)
 
-/* Controller sram size in word */
-#define CQSPI_REG_SRAM_SIZE_WORD		(128)
-#define CQSPI_REG_SRAM_PARTITION_RD		(CQSPI_REG_SRAM_SIZE_WORD/2)
 #define CQSPI_REG_SRAM_THRESHOLD_WORDS		(50)
 
 /* Transfer mode */
@@ -536,8 +533,7 @@ void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat)
 	writel(0, plat->regbase + CQSPI_REG_REMAP);
 
 	/* Indirect mode configurations */
-	writel(CQSPI_REG_SRAM_PARTITION_RD,
-		plat->regbase + CQSPI_REG_SRAMPARTITION);
+	writel((plat->sram_size/2), plat->regbase + CQSPI_REG_SRAMPARTITION);
 
 	/* Disable all interrupts */
 	writel(0, plat->regbase + CQSPI_REG_IRQMASK);
-- 
1.7.9.5