[U-Boot] [v4 09/10] spi: cadence_qspi: support FIFO width other than 4 bytes
Vikas Manocha
vikas.manocha at st.com
Fri Jul 3 03:29:45 CEST 2015
This patch makes the code compatible with FIFO depths other than 4
bytes. It also simplify read/write FIFO loops.
Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
Tested-by: Stefan Roese <sr at denx.de>
---
Changes in v4: none
Changes in v3: Rebased to spi-next-dev
Changes in v2: Fixed the checkpatch.pl error
drivers/spi/cadence_qspi_apb.c | 46 ++++++++++++++++++++--------------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index cbf0d42..d053407 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -200,18 +200,16 @@ static void cadence_qspi_apb_read_fifo_data(void *dest,
unsigned int *dest_ptr = (unsigned int *)dest;
unsigned int *src_ptr = (unsigned int *)src_ahb_addr;
- while (remaining > 0) {
- if (remaining >= CQSPI_FIFO_WIDTH) {
- *dest_ptr = readl(src_ptr);
- remaining -= CQSPI_FIFO_WIDTH;
- } else {
- /* dangling bytes */
- temp = readl(src_ptr);
- memcpy(dest_ptr, &temp, remaining);
- break;
- }
+ while (remaining >= sizeof(dest_ptr)) {
+ *dest_ptr = readl(src_ptr);
+ remaining -= sizeof(src_ptr);
dest_ptr++;
}
+ if (remaining) {
+ /* dangling bytes */
+ temp = readl(src_ptr);
+ memcpy(dest_ptr, &temp, remaining);
+ }
return;
}
@@ -219,24 +217,26 @@ static void cadence_qspi_apb_read_fifo_data(void *dest,
static void cadence_qspi_apb_write_fifo_data(const void *dest_ahb_addr,
const void *src, unsigned int bytes)
{
- unsigned int temp;
+ unsigned int temp = 0;
+ int i;
int remaining = bytes;
unsigned int *dest_ptr = (unsigned int *)dest_ahb_addr;
unsigned int *src_ptr = (unsigned int *)src;
- while (remaining > 0) {
- if (remaining >= CQSPI_FIFO_WIDTH) {
- writel(*src_ptr, dest_ptr);
- remaining -= sizeof(unsigned int);
- } else {
- /* dangling bytes */
- memcpy(&temp, src_ptr, remaining);
- writel(temp, dest_ptr);
- break;
- }
- src_ptr++;
+ while (remaining >= CQSPI_FIFO_WIDTH) {
+ for (i = CQSPI_FIFO_WIDTH/sizeof(src_ptr) - 1; i >= 0; i--)
+ writel(*(src_ptr+i), dest_ptr+i);
+ src_ptr += CQSPI_FIFO_WIDTH/sizeof(src_ptr);
+ remaining -= CQSPI_FIFO_WIDTH;
+ }
+ if (remaining) {
+ /* dangling bytes */
+ i = remaining/sizeof(dest_ptr);
+ memcpy(&temp, src_ptr+i, remaining % sizeof(dest_ptr));
+ writel(temp, dest_ptr+i);
+ for (--i; i >= 0; i--)
+ writel(*(src_ptr+i), dest_ptr+i);
}
-
return;
}
--
1.7.9.5
More information about the U-Boot
mailing list