[U-Boot] [PATCH 2/6] dm: pci: Correct primary/secondary/subordinate bus number assignment

[Bin Meng]

In driver model, each pci bridge device has its own hose structure.
hose->first_busno points to the bridge device's device number, so
we should not substract hose->first_busno before programming the
bridge device's primary/secondary/subordinate bus number registers.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 drivers/pci/pci_auto.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index e034ed1..ef6dc4f 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -224,10 +224,15 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 	prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
 
 	/* Configure bus number registers */
+#ifdef CONFIG_DM_PCI
+	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev));
+	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus);
+#else
 	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
 				   PCI_BUS(dev) - hose->first_busno);
 	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
 				   sub_bus - hose->first_busno);
+#endif
 	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
 
 	if (pci_mem) {
@@ -295,8 +300,12 @@ void pciauto_postscan_setup_bridge(struct pci_controller *hose,
 	struct pci_region *pci_io = hose->pci_io;
 
 	/* Configure bus number registers */
+#ifdef CONFIG_DM_PCI
+	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus);
+#else
 	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
 				   sub_bus - hose->first_busno);
+#endif
 
 	if (pci_mem) {
 		/* Round memory allocator to 1MB boundary */
-- 
1.8.2.1