[U-Boot] [PATCH V3 4/8] configs: ti_armv7_keystone2: start using armv7_common

Sat Jul 18 18:40:32 CEST 2015

Try to maintain as much commonality by conditionally including stuff
in armv7_common as necessary and removing the common defines from
keystone2 header.

Note: as part of this change, all keystone2 platforms will now start
using the generic u-boot prompt instead of the custom prompt.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes in V3:
	- undefed MMC from ks2
	- removed white space introduced (review comments)
	- address change review comment is split off as patch 5

V2: https://patchwork.ozlabs.org/patch/496823/
V1: https://patchwork.ozlabs.org/patch/496730/

 include/configs/k2e_evm.h            |  2 --
 include/configs/k2hk_evm.h           |  2 --
 include/configs/k2l_evm.h            |  2 --
 include/configs/ti_armv7_common.h    |  5 +++-
 include/configs/ti_armv7_keystone2.h | 55 ++++++++++++------------------------
 5 files changed, 22 insertions(+), 44 deletions(-)

diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
index ac50a01b2980..f1e650141ae1 100644
--- a/include/configs/k2e_evm.h
+++ b/include/configs/k2e_evm.h
@@ -15,8 +15,6 @@
 #define CONFIG_K2E_EVM
 
 /* U-Boot general configuration */
-#define CONFIG_SYS_PROMPT               "K2E EVM # "
-
 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
 	"addr_mon=0x0c140000\0"						\
 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 29e3403aa082..f8e83de64b63 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -15,8 +15,6 @@
 #define CONFIG_K2HK_EVM
 
 /* U-Boot general configuration */
-#define CONFIG_SYS_PROMPT               "K2HK EVM # "
-
 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
 	"addr_mon=0x0c5f0000\0"						\
 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h
index 50d5c991a0bb..395608a5f6db 100644
--- a/include/configs/k2l_evm.h
+++ b/include/configs/k2l_evm.h
@@ -15,8 +15,6 @@
 #define CONFIG_K2L_EVM
 
 /* U-Boot general configuration */
-#define CONFIG_SYS_PROMPT		"K2L EVM # "
-
 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
 	"addr_mon=0x0c140000\0"						\
 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 63244dbc83ff..68bfed28820c 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -74,8 +74,11 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #endif
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
+
+#ifndef CONFIG_SYS_INIT_SP_ADDR
 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
 						GENERATED_GBL_DATA_SIZE)
+#endif
 
 /* Timer information. */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
@@ -140,7 +143,7 @@
  * mtdparts, both for ease of use in U-Boot and for passing information
  * on to the Linux kernel.
  */
-#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND)
+#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) || defined(CONFIG_NAND_DAVINCI)
 #define CONFIG_MTD_DEVICE		/* Required for mtdparts */
 #define CONFIG_CMD_MTDPARTS
 #endif
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index d838f270018b..0e67cf0ebd75 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -14,10 +14,7 @@
 
 /* U-Boot Build Configuration */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is a 2nd stage loader */
-#define CONFIG_SYS_NO_FLASH		/* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_THUMB_BUILD
 
 /* SoC Configuration */
 #define CONFIG_ARCH_CPU_INIT
@@ -28,11 +25,9 @@
 
 /* Memory Configuration */
 #define CONFIG_NR_DRAM_BANKS		2
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_LPAE_SDRAM_BASE	0x800000000
 #define CONFIG_MAX_RAM_BANK_SIZE	(2 << 30)       /* 2GB */
 #define CONFIG_STACKSIZE		(512 << 10)     /* 512 KiB */
-#define CONFIG_SYS_MALLOC_LEN		(4 << 20)       /* 4 MiB */
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - \
 					GENERATED_GBL_DATA_SIZE)
 
@@ -49,15 +44,10 @@
 #define CONFIG_SPL_STACK		(CONFIG_SYS_SPL_MALLOC_START + \
 					CONFIG_SYS_SPL_MALLOC_SIZE + \
 					CONFIG_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
-#define CONFIG_SPL_FRAMEWORK
 
 /* UART Configuration */
 #define CONFIG_SYS_NS16550
@@ -68,13 +58,10 @@
 #define CONFIG_SYS_NS16550_COM2		KS2_UART1_BASE
 #define CONFIG_SYS_NS16550_CLK		clk_get_rate(KS2_CLK1_6)
 #define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
 
 /* SPI Configuration */
-#define CONFIG_SPI
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_DAVINCI_SPI
-#define CONFIG_CMD_SPI
 #define CONFIG_SYS_SPI_CLK		clk_get_rate(KS2_CLK1_6)
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
@@ -148,7 +135,6 @@
 #define CONFIG_AEMIF_CNTRL_BASE		KS2_AEMIF_CNTRL_BASE
 
 /* I2C Configuration */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_DAVINCI
 #define CONFIG_SYS_DAVINCI_I2C_SPEED	100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE	0x10 /* SMBus host address */
@@ -185,7 +171,6 @@
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET			0x100000
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
 #define CONFIG_RBTREE
 #define CONFIG_LZO
 #define MTDIDS_DEFAULT			"nand0=davinci_nand.0"
@@ -197,8 +182,6 @@
 #define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_KEYSTONE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 #define CONFIG_FS_FAT
 #define CONFIG_SYS_CACHELINE_SIZE		64
@@ -208,39 +191,25 @@
 #define CONFIG_USB_PHY_CFG_BASE			KS2_USB_PHY_CFG_BASE
 
 /* U-Boot command configuration */
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
 
 /* U-Boot general configuration */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_PBSIZE		2048
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
 #define CONFIG_TIMESTAMP
 
 /* EDMA3 */
 #define CONFIG_TI_EDMA3
 
-#define CONFIG_BOOTDELAY		3
 #define CONFIG_BOOTFILE			"uImage"
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
@@ -301,14 +270,26 @@
 #define CONFIG_BOOTARGS							\
 
 /* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_OF_LIBFDT		1
 #define CONFIG_OF_BOARD_SETUP
-#define CONFIG_SYS_BARGSIZE		1024
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x08000000)
 
-#define CONFIG_SUPPORT_RAW_INITRD
+/* Now for the remaining common defines */
+#include <configs/ti_armv7_common.h>
+
+/* We wont be loading up OS from SPL for now.. */
+#undef CONFIG_SPL_OS_BOOT
+
+/* We do not have MMC support.. yet.. */
+#undef CONFIG_SPL_LIBDISK_SUPPORT
+#undef CONFIG_SPL_MMC_SUPPORT
+#undef CONFIG_SPL_FAT_SUPPORT
+#undef CONFIG_SPL_EXT_SUPPORT
+#undef CONFIG_MMC
+#undef CONFIG_GENERIC_MMC
+#undef CONFIG_CMD_MMC
+
+/* And no support for GPIO, yet.. */
+#undef CONFIG_SPL_GPIO_SUPPORT
+#undef CONFIG_CMD_GPIO
 
 /* we may include files below only after all above definitions */
 #include <asm/arch/hardware.h>
-- 
2.1.4

