[U-Boot] [PATCH 11/15][v2] imx: imx7d: Add SoC system support

Adrian Alonso aalonso at freescale.com
Tue Jul 21 02:17:52 CEST 2015


* Add SoC system support, Misc arch dependent functions for
  system bring up:
  s_init: system init enable clock base settings
  enable_caches: configures Cortex-A7 L2 caches
  get_boot_device: identifies boot device

Signed-off-by: Adrian Alonso <aalonso at freescale.com>
Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
Signed-off-by: Ye.Li <B37916 at freescale.com>
---
Changes for V2: Split from patch imx: imx7d: initial arch level support

 arch/arm/cpu/armv7/mx7/soc.c                | 360 ++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-imx/cpu.h         |   1 +
 arch/arm/include/asm/imx-common/boot_mode.h |  21 ++
 3 files changed, 382 insertions(+)
 create mode 100644 arch/arm/cpu/armv7/mx7/soc.c

diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
new file mode 100644
index 0000000..4213dad
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7/soc.c
@@ -0,0 +1,360 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/dma.h>
+#include <stdbool.h>
+#include <asm/arch/crm_regs.h>
+#include <dm.h>
+#include <imx_thermal.h>
+#ifdef CONFIG_VIDEO_MXS
+#include <mxsfb.h>
+#endif
+
+struct src *src_reg = (struct src *)SRC_BASE_ADDR;
+
+#if defined(CONFIG_IMX_THERMAL)
+static const struct imx_thermal_plat imx7_thermal_plat = {
+	.regs = (void *)ANATOP_BASE_ADDR,
+	.fuse_bank = 3,
+	.fuse_word = 3,
+};
+
+U_BOOT_DEVICE(imx7_thermal) = {
+	.name = "imx_thermal",
+	.platdata = &imx7_thermal_plat,
+};
+#endif
+
+u32 get_cpu_rev(void)
+{
+	struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
+						 ANATOP_BASE_ADDR;
+	u32 reg = readl(&ccm_anatop->digprog);
+	u32 type = (reg >> 16) & 0xff;
+
+	reg &= 0xff;
+	return (type << 12) | reg;
+}
+
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	u32 cpurev = get_cpu_rev();
+	u32 type = ((cpurev >> 12) & 0xff);
+
+	if (type == MXC_CPU_MX7D)
+		cpurev = (MXC_CPU_MX7D) << 12 | (cpurev & 0xFFF);
+
+	return cpurev;
+}
+#endif
+
+static void init_aips(void)
+{
+	struct aipstz_regs *aips1, *aips2, *aips3;
+
+	aips1 = (struct aipstz_regs *)AIPS1_ON_BASE_ADDR;
+	aips2 = (struct aipstz_regs *)AIPS2_ON_BASE_ADDR;
+	aips3 = (struct aipstz_regs *)AIPS3_ON_BASE_ADDR;
+
+	/*
+	 * Set all MPROTx to be non-bufferable, trusted for R/W,
+	 * not forced to user-mode.
+	 */
+	writel(0x77777777, &aips1->mprot0);
+	writel(0x77777777, &aips1->mprot1);
+	writel(0x77777777, &aips2->mprot0);
+	writel(0x77777777, &aips2->mprot1);
+	writel(0x77777777, &aips3->mprot0);
+	writel(0x77777777, &aips3->mprot1);
+
+	/*
+	 * Set all OPACRx to be non-bufferable, not require
+	 * supervisor privilege level for access,allow for
+	 * write access and untrusted master access.
+	 */
+	writel(0x00000000, &aips1->opacr0);
+	writel(0x00000000, &aips1->opacr1);
+	writel(0x00000000, &aips1->opacr2);
+	writel(0x00000000, &aips1->opacr3);
+	writel(0x00000000, &aips1->opacr4);
+	writel(0x00000000, &aips2->opacr0);
+	writel(0x00000000, &aips2->opacr1);
+	writel(0x00000000, &aips2->opacr2);
+	writel(0x00000000, &aips2->opacr3);
+	writel(0x00000000, &aips2->opacr4);
+	writel(0x00000000, &aips3->opacr0);
+	writel(0x00000000, &aips3->opacr1);
+	writel(0x00000000, &aips3->opacr2);
+	writel(0x00000000, &aips3->opacr3);
+	writel(0x00000000, &aips3->opacr4);
+}
+
+static void imx_set_pcie_phy_power_down(void)
+{
+	/* TODO */
+}
+
+static void imx_set_wdog_powerdown(bool enable)
+{
+	struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
+	struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
+	struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
+	struct wdog_regs *wdog4 = (struct wdog_regs *)WDOG4_BASE_ADDR;
+
+	writew(enable, &wdog1->wmcr);
+	writew(enable, &wdog2->wmcr);
+	writew(enable, &wdog3->wmcr);
+	writew(enable, &wdog4->wmcr);
+}
+
+static void set_epdc_qos(void)
+{
+#define REGS_QOS_BASE     QOSC_IPS_BASE_ADDR
+#define REGS_QOS_EPDC     (QOSC_IPS_BASE_ADDR + 0x3400)
+#define REGS_QOS_PXP0     (QOSC_IPS_BASE_ADDR + 0x2C00)
+#define REGS_QOS_PXP1     (QOSC_IPS_BASE_ADDR + 0x3C00)
+
+	writel(0, REGS_QOS_BASE);  /*  Disable clkgate & soft_reset */
+	writel(0, REGS_QOS_BASE + 0x60);  /*  Enable all masters */
+	writel(0, REGS_QOS_EPDC);   /*  Disable clkgate & soft_reset */
+	writel(0, REGS_QOS_PXP0);   /*  Disable clkgate & soft_reset */
+	writel(0, REGS_QOS_PXP1);   /*  Disable clkgate & soft_reset */
+
+	writel(0x0f020722, REGS_QOS_EPDC + 0xd0);   /*  WR, init = 7 with red flag */
+	writel(0x0f020722, REGS_QOS_EPDC + 0xe0);   /*  RD,  init = 7 with red flag */
+
+	writel(1, REGS_QOS_PXP0);   /*  OT_CTRL_EN =1 */
+	writel(1, REGS_QOS_PXP1);   /*  OT_CTRL_EN =1 */
+
+	writel(0x0f020222, REGS_QOS_PXP0 + 0x50);   /*  WR,  init = 2 with red flag */
+	writel(0x0f020222, REGS_QOS_PXP1 + 0x50);   /*  WR,  init = 2 with red flag */
+	writel(0x0f020222, REGS_QOS_PXP0 + 0x60);   /*  rD,  init = 2 with red flag */
+	writel(0x0f020222, REGS_QOS_PXP1 + 0x60);   /*  rD,  init = 2 with red flag */
+	writel(0x0f020422, REGS_QOS_PXP0 + 0x70);   /*  tOTAL,  init = 4 with red flag */
+	writel(0x0f020422, REGS_QOS_PXP1 + 0x70);   /*  TOTAL,  init = 4 with red flag */
+
+	writel(0xe080, IOMUXC_GPR_BASE_ADDR + 0x0034); /* EPDC AW/AR CACHE ENABLE */
+}
+
+int arch_cpu_init(void)
+{
+	init_aips();
+
+	/* Disable PDE bit of WMCR register */
+	imx_set_wdog_powerdown(false);
+
+	imx_set_pcie_phy_power_down();
+
+#ifdef CONFIG_APBH_DMA
+	/* Start APBH DMA */
+	mxs_dma_init();
+#endif
+
+	set_epdc_qos();
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_POSTCLK_INIT
+int board_postclk_init(void)
+{
+	/*
+	 * We do not need to set LDO_SOC as i.mx6, since LDO_ARM and LDO_SOC
+	 * does not exist. Check "Figure 7-9. i.MX7Dual Power Diagram"
+	 */
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SERIAL_TAG
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[0];
+	struct fuse_bank0_regs *fuse =
+		(struct fuse_bank0_regs *)bank->fuse_regs;
+
+	serialnr->low = fuse->tester0;
+	serialnr->high = fuse->tester1;
+}
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+	enum dcache_option option = DCACHE_WRITETHROUGH;
+#else
+	enum dcache_option option = DCACHE_WRITEBACK;
+#endif
+
+	/* Avoid random hang when download by usb */
+	invalidate_dcache_all();
+
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+
+	/* Enable caching on OCRAM and ROM */
+	mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
+					ROMCP_ARB_END_ADDR,
+					option);
+	mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
+					IRAM_SIZE,
+					option);
+}
+#endif
+
+#if defined(CONFIG_FEC_MXC)
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[9];
+	struct fuse_bank9_regs *fuse =
+		(struct fuse_bank9_regs *)bank->fuse_regs;
+
+	if (0 == dev_id) {
+		u32 value = readl(&fuse->mac_addr1);
+		mac[0] = (value >> 8);
+		mac[1] = value;
+
+		value = readl(&fuse->mac_addr0);
+		mac[2] = value >> 24;
+		mac[3] = value >> 16;
+		mac[4] = value >> 8;
+		mac[5] = value;
+	} else {
+		u32 value = readl(&fuse->mac_addr2);
+		mac[0] = value >> 24;
+		mac[1] = value >> 16;
+		mac[2] = value >> 8;
+		mac[3] = value;
+
+		value = readl(&fuse->mac_addr1);
+		mac[4] = value >> 24;
+		mac[5] = value >> 16;
+	}
+}
+#endif
+
+void boot_mode_apply(uint32_t cfg_val)
+{
+	uint32_t reg;
+	writel(cfg_val, &src_reg->gpr9);
+	reg = readl(&src_reg->gpr10);
+	if (cfg_val)
+		reg |= 1 << 28;
+	else
+		reg &= ~(1 << 28);
+	writel(reg, &src_reg->gpr10);
+}
+
+void set_wdog_reset(struct wdog_regs *wdog)
+{
+	u32 reg = readw(&wdog->wcr);
+	/*
+	 * Output WDOG_B signal to reset external pmic or POR_B decided by
+	 * the board desgin. Without external reset, the peripherals/DDR/
+	 * PMIC are not reset, that may cause system working abnormal.
+	 */
+	reg = readw(&wdog->wcr);
+	reg |= 1 << 3;
+	/*
+	 * WDZST bit is write-once only bit. Align this bit in kernel,
+	 * otherwise kernel code will have no chance to set this bit.
+	 */
+	reg |= 1 << 0;
+	writew(reg, &wdog->wcr);
+}
+
+/*
+ * cfg_val will be used for
+ * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
+ * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0]
+ * to SBMR1, which will determine the boot device.
+ */
+const struct boot_mode soc_boot_modes[] = {
+	{"ecspi1:0",	MAKE_CFGVAL(0x00, 0x60, 0x00, 0x00)},
+	{"ecspi1:1",	MAKE_CFGVAL(0x40, 0x62, 0x00, 0x00)},
+	{"ecspi1:2",	MAKE_CFGVAL(0x80, 0x64, 0x00, 0x00)},
+	{"ecspi1:3",	MAKE_CFGVAL(0xc0, 0x66, 0x00, 0x00)},
+
+	{"weim",	MAKE_CFGVAL(0x00, 0x50, 0x00, 0x00)},
+	{"qspi1",	MAKE_CFGVAL(0x10, 0x40, 0x00, 0x00)},
+	/* 4 bit bus width */
+	{"usdhc1",	MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)},
+	{"usdhc2",	MAKE_CFGVAL(0x10, 0x14, 0x00, 0x00)},
+	{"usdhc3",	MAKE_CFGVAL(0x10, 0x18, 0x00, 0x00)},
+	{"mmc1",	MAKE_CFGVAL(0x10, 0x20, 0x00, 0x00)},
+	{"mmc2",	MAKE_CFGVAL(0x10, 0x24, 0x00, 0x00)},
+	{"mmc3",	MAKE_CFGVAL(0x10, 0x28, 0x00, 0x00)},
+	{NULL,		0},
+};
+
+enum boot_device get_boot_device(void)
+{
+	struct bootrom_sw_info **p =
+		(struct bootrom_sw_info **)ROM_SW_INFO_ADDR;
+
+	enum boot_device boot_dev = SD1_BOOT;
+	u8 boot_type = (*p)->boot_dev_type;
+	u8 boot_instance = (*p)->boot_dev_instance;
+
+	switch (boot_type) {
+	case BOOT_TYPE_SD:
+		boot_dev = boot_instance + SD1_BOOT;
+		break;
+	case BOOT_TYPE_MMC:
+		boot_dev = boot_instance + MMC1_BOOT;
+		break;
+	case BOOT_TYPE_NAND:
+		boot_dev = NAND_BOOT;
+		break;
+	case BOOT_TYPE_QSPI:
+		boot_dev = QSPI_BOOT;
+		break;
+	case BOOT_TYPE_WEIM:
+		boot_dev = WEIM_NOR_BOOT;
+		break;
+	case BOOT_TYPE_SPINOR:
+		boot_dev = SPI_NOR_BOOT;
+		break;
+	default:
+		break;
+	}
+
+	return boot_dev;
+}
+
+void s_init(void)
+{
+#if !defined CONFIG_SPL_BUILD
+	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
+	asm volatile(
+			"mrc p15, 0, r0, c1, c0, 1\n"
+			"orr r0, r0, #1 << 6\n"
+			"mcr p15, 0, r0, c1, c0, 1\n");
+#endif
+	/* clock configuration. */
+	clock_init();
+
+	return;
+}
+
+void reset_misc(void)
+{
+#ifdef CONFIG_VIDEO_MXS
+	lcdif_power_down();
+#endif
+}
diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h
index 4715f4e..e0b4bc8 100644
--- a/arch/arm/include/asm/arch-imx/cpu.h
+++ b/arch/arm/include/asm/arch-imx/cpu.h
@@ -12,6 +12,7 @@
 #define MXC_CPU_MX6Q		0x63
 #define MXC_CPU_MX6D		0x64
 #define MXC_CPU_MX6SOLO		0x65 /* dummy ID */
+#define MXC_CPU_MX7D		0x72
 
 #define CS0_128					0
 #define CS0_64M_CS1_64M				1
diff --git a/arch/arm/include/asm/imx-common/boot_mode.h b/arch/arm/include/asm/imx-common/boot_mode.h
index de0205c..62dd01d 100644
--- a/arch/arm/include/asm/imx-common/boot_mode.h
+++ b/arch/arm/include/asm/imx-common/boot_mode.h
@@ -9,6 +9,27 @@
 #define MAKE_CFGVAL(cfg1, cfg2, cfg3, cfg4) \
 	((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1)
 
+enum boot_device {
+        WEIM_NOR_BOOT,
+        ONE_NAND_BOOT,
+        PATA_BOOT,
+        SATA_BOOT,
+        I2C_BOOT,
+        SPI_NOR_BOOT,
+        SD1_BOOT,
+        SD2_BOOT,
+        SD3_BOOT,
+        SD4_BOOT,
+        MMC1_BOOT,
+        MMC2_BOOT,
+        MMC3_BOOT,
+        MMC4_BOOT,
+        NAND_BOOT,
+        QSPI_BOOT,
+        UNKNOWN_BOOT,
+        BOOT_DEV_NUM = UNKNOWN_BOOT,
+};
+
 struct boot_mode {
 	const char *name;
 	unsigned cfg_val;
-- 
2.1.4



More information about the U-Boot mailing list