[U-Boot] [PATCH 12/15][v2] imx: imx7d: add hab secure boot support
Adrian Alonso
aalonso at freescale.com
Tue Jul 21 02:17:53 CEST 2015
* HAB secure boot support
- get_hab_status: checks if secure boot is enabled or not
- authenticate_image: verifies image properly signed based
on CSF entry
* Uboot command for hab authenticate
- hab_auth_img: authenticate image via HAB
- hab_status: display HAB status
Signed-off-by: Adrian Alonso <aalonso at freescale.com>
---
Changes for V2: Split from patch imx: imx7d: initial arch level support
arch/arm/cpu/armv7/mx7/Makefile | 9 ++
arch/arm/cpu/armv7/mx7/hab.c | 277 ++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-mx7/hab.h | 69 +++++++++
3 files changed, 355 insertions(+)
create mode 100644 arch/arm/cpu/armv7/mx7/Makefile
create mode 100644 arch/arm/cpu/armv7/mx7/hab.c
create mode 100644 arch/arm/include/asm/arch-mx7/hab.h
diff --git a/arch/arm/cpu/armv7/mx7/Makefile b/arch/arm/cpu/armv7/mx7/Makefile
new file mode 100644
index 0000000..d36501d
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2015 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+#
+
+obj-y := soc.o clock.o clock_slice.o
+obj-$(CONFIG_SECURE_BOOT) += hab.o
diff --git a/arch/arm/cpu/armv7/mx7/hab.c b/arch/arm/cpu/armv7/mx7/hab.c
new file mode 100644
index 0000000..43b06bd
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7/hab.c
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hab.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+/* -------- start of HAB API updates ------------*/
+#define hab_rvt_report_event_p \
+( \
+ ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) \
+)
+
+#define hab_rvt_report_status_p \
+( \
+ ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) \
+)
+
+#define hab_rvt_authenticate_image_p \
+( \
+ ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) \
+)
+
+#define hab_rvt_entry_p \
+( \
+ ((hab_rvt_entry_t *)HAB_RVT_ENTRY) \
+)
+
+#define hab_rvt_exit_p \
+( \
+ ((hab_rvt_exit_t *)HAB_RVT_EXIT) \
+)
+
+#define IVT_SIZE 0x20
+#define ALIGN_SIZE 0x1000
+#define CSF_PAD_SIZE 0x2000
+
+/*
+ * +------------+ 0x0 (DDR_UIMAGE_START) -
+ * | Header | |
+ * +------------+ 0x40 |
+ * | | |
+ * | | |
+ * | | |
+ * | | |
+ * | Image Data | |
+ * . | |
+ * . | > Stuff to be authenticated ----+
+ * . | | |
+ * | | | |
+ * | | | |
+ * +------------+ | |
+ * | | | |
+ * | Fill Data | | |
+ * | | | |
+ * +------------+ Align to ALIGN_SIZE | |
+ * | IVT | | |
+ * +------------+ + IVT_SIZE - |
+ * | | |
+ * | CSF DATA | <---------------------------------------------------------+
+ * | |
+ * +------------+
+ * | |
+ * | Fill Data |
+ * | |
+ * +------------+ + CSF_PAD_SIZE
+ */
+
+bool is_hab_enabled(void)
+{
+ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+ struct fuse_bank *bank = &ocotp->bank[1];
+ struct fuse_bank1_regs *fuse =
+ (struct fuse_bank1_regs *)bank->fuse_regs;
+ uint32_t reg = readl(&fuse->cfg0);
+
+ return (reg & 0x2000000) == 0x2000000;
+}
+
+void display_event(uint8_t *event_data, size_t bytes)
+{
+ uint32_t i;
+
+ if (!(event_data && bytes > 0))
+ return;
+
+ for (i = 0; i < bytes; i++) {
+ if (i == 0)
+ printf("\t0x%02x", event_data[i]);
+ else if ((i % 8) == 0)
+ printf("\n\t0x%02x", event_data[i]);
+ else
+ printf(" 0x%02x", event_data[i]);
+ }
+}
+
+int get_hab_status(void)
+{
+ uint32_t index = 0; /* Loop index */
+ uint8_t event_data[128]; /* Event data buffer */
+ size_t bytes = sizeof(event_data); /* Event size in bytes */
+ enum hab_config config = 0;
+ enum hab_state state = 0;
+ hab_rvt_report_event_t *hab_rvt_report_event;
+ hab_rvt_report_status_t *hab_rvt_report_status;
+
+ if (is_hab_enabled())
+ puts("\nSecure boot enabled\n");
+ else
+ puts("\nSecure boot disabled\n");
+
+ hab_rvt_report_event = hab_rvt_report_event_p;
+ hab_rvt_report_status = hab_rvt_report_status_p;
+
+ /* Check HAB status */
+ if (hab_rvt_report_status(&config, &state) != HAB_SUCCESS) {
+ printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n",
+ config, state);
+
+ /* Display HAB Error events */
+ while (hab_rvt_report_event(HAB_FAILURE, index, event_data,
+ &bytes) == HAB_SUCCESS) {
+ puts("\n");
+ printf("--------- HAB Event %d -----------------\n",
+ index + 1);
+ puts("event data:\n");
+ display_event(event_data, bytes);
+ puts("\n");
+ bytes = sizeof(event_data);
+ index++;
+ }
+ }
+ /* Display message if no HAB events are found */
+ else {
+ printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n",
+ config, state);
+ puts("No HAB Events Found!\n\n");
+ }
+ return 0;
+}
+
+#ifdef DEBUG_AUTHENTICATE_IMAGE
+void dump_mem(uint32_t addr, int size)
+{
+ int i;
+
+ for (i = 0; i < size; i += 4) {
+ if (i != 0) {
+ if (i % 16 == 0)
+ printf("\n");
+ else
+ printf(" ");
+ }
+
+ printf("0x%08x", *(uint32_t *)addr);
+ addr += 4;
+ }
+
+ printf("\n");
+
+ return;
+}
+#endif
+
+uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
+{
+ uint32_t load_addr = 0;
+ size_t bytes;
+ ptrdiff_t ivt_offset = 0;
+ int result = 0;
+ ulong start;
+ hab_rvt_authenticate_image_t *hab_rvt_authenticate_image;
+ hab_rvt_entry_t *hab_rvt_entry;
+ hab_rvt_exit_t *hab_rvt_exit;
+
+ hab_rvt_authenticate_image = hab_rvt_authenticate_image_p;
+ hab_rvt_entry = hab_rvt_entry_p;
+ hab_rvt_exit = hab_rvt_exit_p;
+
+ if (is_hab_enabled()) {
+ printf("\nAuthenticate uImage from DDR location 0x%x...\n",
+ ddr_start);
+
+ hab_caam_clock_enable(1);
+
+ if (hab_rvt_entry() == HAB_SUCCESS) {
+ /* If not already aligned, Align to ALIGN_SIZE */
+ ivt_offset = (image_size + ALIGN_SIZE - 1) &
+ ~(ALIGN_SIZE - 1);
+
+ start = ddr_start;
+ bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE;
+
+#ifdef DEBUG_AUTHENTICATE_IMAGE
+ printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n",
+ ivt_offset, ddr_start + ivt_offset);
+ printf("Dumping IVT\n");
+ dump_mem(ddr_start + ivt_offset, 0x20);
+
+ printf("Dumping CSF Header\n");
+ dump_mem(ddr_start + ivt_offset + 0x20, 0x40);
+
+ get_hab_status();
+
+ printf("\nCalling authenticate_image in ROM\n");
+ printf("\tivt_offset = 0x%x\n\tstart = 0x%08x"
+ "\n\tbytes = 0x%x\n", ivt_offset, start, bytes);
+#endif
+ load_addr = (uint32_t)hab_rvt_authenticate_image(
+ HAB_CID_UBOOT,
+ ivt_offset, (void **)&start,
+ (size_t *)&bytes, NULL);
+ if (hab_rvt_exit() != HAB_SUCCESS) {
+ printf("hab exit function fail\n");
+ load_addr = 0;
+ }
+ } else
+ printf("hab entry function fail\n");
+
+ hab_caam_clock_enable(0);
+
+ get_hab_status();
+ }
+
+ if ((!is_hab_enabled()) || (load_addr != 0))
+ result = 1;
+
+ return result;
+}
+
+int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if ((argc != 1)) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ get_hab_status();
+
+ return 0;
+}
+
+static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ ulong addr, ivt_offset;
+ int rcode = 0;
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ addr = simple_strtoul(argv[1], NULL, 16);
+ ivt_offset = simple_strtoul(argv[2], NULL, 16);
+
+ rcode = authenticate_image(addr, ivt_offset);
+
+ return rcode;
+}
+
+U_BOOT_CMD(
+ hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status,
+ "display HAB status",
+ ""
+ );
+
+U_BOOT_CMD(
+ hab_auth_img, 3, 1, do_authenticate_image,
+ "authenticate image via HAB",
+ "addr ivt_offset\n"
+ "addr - image hex address\n"
+ "ivt_offset - hex offset of IVT in the image"
+ );
diff --git a/arch/arm/include/asm/arch-mx7/hab.h b/arch/arm/include/asm/arch-mx7/hab.h
new file mode 100644
index 0000000..fa29c78
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx7/hab.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+*/
+
+#ifndef __SECURE_MX7_H__
+#define __SECURE_MX7_H__
+
+#include <linux/types.h>
+
+/* -------- start of HAB API updates ------------*/
+/* The following are taken from HAB4 SIS */
+
+/* Status definitions */
+enum hab_status {
+ HAB_STS_ANY = 0x00,
+ HAB_FAILURE = 0x33,
+ HAB_WARNING = 0x69,
+ HAB_SUCCESS = 0xf0
+};
+
+/* Security Configuration definitions */
+enum hab_config {
+ HAB_CFG_RETURN = 0x33, /**< Field Return IC */
+ HAB_CFG_OPEN = 0xf0, /**< Non-secure IC */
+ HAB_CFG_CLOSED = 0xcc /**< Secure IC */
+};
+
+/* State definitions */
+enum hab_state {
+ HAB_STATE_INITIAL = 0x33, /**< Initialising state (transitory) */
+ HAB_STATE_CHECK = 0x55, /**< Check state (non-secure) */
+ HAB_STATE_NONSECURE = 0x66, /**< Non-secure state */
+ HAB_STATE_TRUSTED = 0x99, /**< Trusted state */
+ HAB_STATE_SECURE = 0xaa, /**< Secure state */
+ HAB_STATE_FAIL_SOFT = 0xcc, /**< Soft fail state */
+ HAB_STATE_FAIL_HARD = 0xff, /**< Hard fail state (terminal) */
+ HAB_STATE_NONE = 0xf0, /**< No security state machine */
+ HAB_STATE_MAX
+};
+
+/*Function prototype description*/
+typedef enum hab_status hab_rvt_report_event_t(enum hab_status, uint32_t,
+ uint8_t* , size_t*);
+typedef enum hab_status hab_rvt_report_status_t(enum hab_config *,
+ enum hab_state *);
+typedef enum hab_status hab_loader_callback_f_t(void**, size_t*, const void*);
+typedef enum hab_status hab_rvt_entry_t(void);
+typedef enum hab_status hab_rvt_exit_t(void);
+typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t,
+ void **, size_t *, hab_loader_callback_f_t);
+typedef void hapi_clock_init_t(void);
+
+#define HAB_RVT_UNIFIED_BASE 0x00000100
+#define HAB_RVT_ENTRY (*(uint32_t *) (HAB_RVT_UNIFIED_BASE + 0x04))
+#define HAB_RVT_EXIT (*(uint32_t *) (HAB_RVT_UNIFIED_BASE + 0x08))
+#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *) (HAB_RVT_UNIFIED_BASE + 0x10))
+#define HAB_RVT_REPORT_EVENT (*(uint32_t *) (HAB_RVT_UNIFIED_BASE + 0x20))
+#define HAB_RVT_REPORT_STATUS (*(uint32_t *) (HAB_RVT_UNIFIED_BASE + 0x24))
+
+#define HAB_RVT_CLOCK_INIT ((hapi_clock_init_t *)0x0000024D)
+
+#define HAB_CID_ROM 0 /**< ROM Caller ID */
+#define HAB_CID_UBOOT 1 /**< UBOOT Caller ID*/
+/* ----------- end of HAB API updates ------------*/
+
+#endif
--
2.1.4
More information about the U-Boot
mailing list