[U-Boot] buildman dtc check error

[Simon Glass]

Hi York,

On 23 July 2015 at 19:15, York Sun <yorksun at freescale.com> wrote:
>
>
> On 07/23/2015 03:24 PM, Simon Glass wrote:
>> Hi York,
>>
>> On 23 July 2015 at 16:10, York Sun <yorksun at freescale.com> wrote:
>>> Simon,
>>>
>>> I am facing a weird issue on the latest u-boot. I can successfully build u-boot
>>> manually, but with buildman I see checkdtc error.
>>>
>>>    aarch64:  +   ls2085aqds
>>> +make[1]: *** [checkdtc] Error 1
>>> +make: *** [sub-make] Error 2
>>>
>>> I have DTC 1.4.1-ge5e6df7c. Is there any flag for buildman I can see more
>>> information? I always use -vVeu as the flag.
>>
>> That's not very helpful, sorry. You can always look at the raw logs.
>> You could try an in-tree build with -i if that is what you are using
>> normally.
>>
>
> Simon,
>
> The raw log has been a mystery for me since beginning. Where do I find it?
> Using -i flag also has the same error message.

We really should solve this mystery :-) It's documented in the buildman README.

By default, ../<branch>/<commit>/<board>/

or if you are just building current source it is in ../current

Regards,
Simon