[U-Boot] buildman dtc check error

[York Sun]

On 07/23/2015 08:45 PM, Simon Glass wrote:
> Hi York,
> 
> On 23 July 2015 at 19:15, York Sun <yorksun at freescale.com> wrote:
>>
>>
>> On 07/23/2015 03:24 PM, Simon Glass wrote:
>>> Hi York,
>>>
>>> On 23 July 2015 at 16:10, York Sun <yorksun at freescale.com> wrote:
>>>> Simon,
>>>>
>>>> I am facing a weird issue on the latest u-boot. I can successfully build u-boot
>>>> manually, but with buildman I see checkdtc error.
>>>>
>>>>    aarch64:  +   ls2085aqds
>>>> +make[1]: *** [checkdtc] Error 1
>>>> +make: *** [sub-make] Error 2
>>>>
>>>> I have DTC 1.4.1-ge5e6df7c. Is there any flag for buildman I can see more
>>>> information? I always use -vVeu as the flag.
>>>
>>> That's not very helpful, sorry. You can always look at the raw logs.
>>> You could try an in-tree build with -i if that is what you are using
>>> normally.
>>>
>>
>> Simon,
>>
>> The raw log has been a mystery for me since beginning. Where do I find it?
>> Using -i flag also has the same error message.
> 
> We really should solve this mystery :-) It's documented in the buildman README.
> 
> By default, ../<branch>/<commit>/<board>/
> 
> or if you are just building current source it is in ../current
> 

Thanks, Simon. I didn't use --force-build. So I guess repeat build didn't
actually build anything. I found the file "log" but it is empty for a successful
build.

York