[U-Boot] [PATCH v3 01/16] drivers/net/vsc9953: Remove 'CONFIG_' from macros' name

Codrin Ciubotariu codrin.ciubotariu at freescale.com
Fri Jul 24 15:52:44 CEST 2015


Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at freescale.com>
---

Changes for v3:
	- none; new patch;

 drivers/net/vsc9953.c | 38 +++++++++++++++++++-------------------
 include/vsc9953.h     | 46 +++++++++++++++++++++++-----------------------
 2 files changed, 42 insertions(+), 42 deletions(-)

diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
index fed7358..068ab86 100644
--- a/drivers/net/vsc9953.c
+++ b/drivers/net/vsc9953.c
@@ -202,26 +202,26 @@ void vsc9953_init(bd_t *bis)
 			VSC9953_DEVCPU_GCB);
 
 	out_le32(&l2dev_gcb->chip_regs.soft_rst,
-		 CONFIG_VSC9953_SOFT_SWC_RST_ENA);
+		 VSC9953_SOFT_SWC_RST_ENA);
 	timeout = 50000;
 	while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) &
-			CONFIG_VSC9953_SOFT_SWC_RST_ENA) && --timeout)
+			VSC9953_SOFT_SWC_RST_ENA) && --timeout)
 		udelay(1); /* busy wait for vsc9953 soft reset */
 	if (timeout == 0)
 		debug("Timeout waiting for VSC9953 to reset\n");
 
-	out_le32(&l2sys_reg->sys.reset_cfg, CONFIG_VSC9953_MEM_ENABLE |
-		 CONFIG_VSC9953_MEM_INIT);
+	out_le32(&l2sys_reg->sys.reset_cfg, VSC9953_MEM_ENABLE |
+		 VSC9953_MEM_INIT);
 
 	timeout = 50000;
 	while ((in_le32(&l2sys_reg->sys.reset_cfg) &
-		CONFIG_VSC9953_MEM_INIT) && --timeout)
+		VSC9953_MEM_INIT) && --timeout)
 		udelay(1); /* busy wait for vsc9953 memory init */
 	if (timeout == 0)
 		debug("Timeout waiting for VSC9953 memory to initialize\n");
 
 	out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg)
-			| CONFIG_VSC9953_CORE_ENABLE));
+			| VSC9953_CORE_ENABLE));
 
 	/* VSC9953 Setting to be done once only */
 	out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00);
@@ -233,34 +233,34 @@ void vsc9953_init(bd_t *bis)
 		/* Enable VSC9953 GMII Ports Port ID 0 - 7 */
 		if (VSC9953_INTERNAL_PORT_CHECK(i)) {
 			out_le32(&l2ana_reg->pfc[i].pfc_cfg,
-				 CONFIG_VSC9953_PFC_FC_QSGMII);
+				 VSC9953_PFC_FC_QSGMII);
 			out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
-				 CONFIG_VSC9953_MAC_FC_CFG_QSGMII);
+				 VSC9953_MAC_FC_CFG_QSGMII);
 		} else {
 			out_le32(&l2ana_reg->pfc[i].pfc_cfg,
-				 CONFIG_VSC9953_PFC_FC);
+				 VSC9953_PFC_FC);
 			out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
-				 CONFIG_VSC9953_MAC_FC_CFG);
+				 VSC9953_MAC_FC_CFG);
 		}
 		out_le32(&l2dev_gmii_reg->port_mode.clock_cfg,
-			 CONFIG_VSC9953_CLOCK_CFG);
+			 VSC9953_CLOCK_CFG);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg,
-			 CONFIG_VSC9953_MAC_ENA_CFG);
+			 VSC9953_MAC_ENA_CFG);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg,
-			 CONFIG_VSC9953_MAC_MODE_CFG);
+			 VSC9953_MAC_MODE_CFG);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg,
-			 CONFIG_VSC9953_MAC_IFG_CFG);
+			 VSC9953_MAC_IFG_CFG);
 		/* mac_hdx_cfg varies with port id*/
-		hdx_cfg = (CONFIG_VSC9953_MAC_HDX_CFG | (i << 16));
+		hdx_cfg = VSC9953_MAC_HDX_CFG | (i << 16);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg);
 		out_le32(&l2sys_reg->sys.front_port_mode[i],
-			 CONFIG_VSC9953_FRONT_PORT_MODE);
+			 VSC9953_FRONT_PORT_MODE);
 		out_le32(&l2qsys_reg->sys.switch_port_mode[i],
-			 CONFIG_VSC9953_PORT_ENA);
+			 VSC9953_PORT_ENA);
 		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg,
-			 CONFIG_VSC9953_MAC_MAX_LEN);
+			 VSC9953_MAC_MAX_LEN);
 		out_le32(&l2sys_reg->pause_cfg.pause_cfg[i],
-			 CONFIG_VSC9953_PAUSE_CFG);
+			 VSC9953_PAUSE_CFG);
 		/* WAIT FOR 2 us*/
 		udelay(2);
 
diff --git a/include/vsc9953.h b/include/vsc9953.h
index 3d11b87..3f14dad 100644
--- a/include/vsc9953.h
+++ b/include/vsc9953.h
@@ -33,29 +33,29 @@
 #define T1040_SWITCH_GMII_DEV_OFFSET	0x010000
 #define VSC9953_PHY_REGS_OFFST		0x0000AC
 
-#define CONFIG_VSC9953_SOFT_SWC_RST_ENA	0x00000001
-#define CONFIG_VSC9953_CORE_ENABLE	0x80
-#define CONFIG_VSC9953_MEM_ENABLE	0x40
-#define CONFIG_VSC9953_MEM_INIT		0x20
-
-#define CONFIG_VSC9953_PORT_ENA		0x00003a00
-#define CONFIG_VSC9953_MAC_ENA_CFG	0x00000011
-#define CONFIG_VSC9953_MAC_MODE_CFG	0x00000011
-#define CONFIG_VSC9953_MAC_IFG_CFG	0x00000515
-#define CONFIG_VSC9953_MAC_HDX_CFG	0x00001043
-#define CONFIG_VSC9953_CLOCK_CFG	0x00000001
-#define CONFIG_VSC9953_CLOCK_CFG_1000M	0x00000001
-#define CONFIG_VSC9953_PFC_FC		0x00000001
-#define CONFIG_VSC9953_PFC_FC_QSGMII	0x00000000
-#define CONFIG_VSC9953_MAC_FC_CFG	0x04700000
-#define CONFIG_VSC9953_MAC_FC_CFG_QSGMII	0x00700000
-#define CONFIG_VSC9953_PAUSE_CFG	0x001ffffe
-#define CONFIG_VSC9953_TOT_TAIL_DROP_LVL	0x000003ff
-#define CONFIG_VSC9953_FRONT_PORT_MODE	0x00000000
-#define CONFIG_VSC9953_MAC_MAX_LEN	0x000005ee
-
-#define	CONFIG_VSC9953_VCAP_MV_CFG	0x0000ffff
-#define	CONFIG_VSC9953_VCAP_UPDATE_CTRL	0x01000004
+#define VSC9953_SOFT_SWC_RST_ENA	0x00000001
+#define VSC9953_CORE_ENABLE		0x80
+#define VSC9953_MEM_ENABLE		0x40
+#define VSC9953_MEM_INIT		0x20
+
+#define VSC9953_PORT_ENA		0x00003a00
+#define VSC9953_MAC_ENA_CFG		0x00000011
+#define VSC9953_MAC_MODE_CFG		0x00000011
+#define VSC9953_MAC_IFG_CFG		0x00000515
+#define VSC9953_MAC_HDX_CFG		0x00001043
+#define VSC9953_CLOCK_CFG		0x00000001
+#define VSC9953_CLOCK_CFG_1000M		0x00000001
+#define VSC9953_PFC_FC			0x00000001
+#define VSC9953_PFC_FC_QSGMII		0x00000000
+#define VSC9953_MAC_FC_CFG		0x04700000
+#define VSC9953_MAC_FC_CFG_QSGMII	0x00700000
+#define VSC9953_PAUSE_CFG		0x001ffffe
+#define VSC9953_TOT_TAIL_DROP_LVL	0x000003ff
+#define VSC9953_FRONT_PORT_MODE		0x00000000
+#define VSC9953_MAC_MAX_LEN		0x000005ee
+
+#define VSC9953_VCAP_MV_CFG		0x0000ffff
+#define VSC9953_VCAP_UPDATE_CTRL	0x01000004
 #define VSC9953_MAX_PORTS		10
 #define VSC9953_PORT_CHECK(port)	\
 	(((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1)
-- 
1.9.3



More information about the U-Boot mailing list