[U-Boot] [PATCH v3 02/16] drivers/net/vsc9953: Cleanup patch

Codrin Ciubotariu codrin.ciubotariu at freescale.com
Fri Jul 24 15:52:45 CEST 2015


This patch groups some macros defined for registers and
replaces some magic numbers from vsc9953 with macros. Also,
"port" and "port_nr" words are replaced with "port_no",
puts each variable declaration on a line and removes
unnecessary tabs.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at freescale.com>
---

Changes for v2:
	- removed Change-id field;

Changes for v3:
	- each variable is declared on a separate line, without using tabs
	- some functions return macros from errno.h insted of 1 or -1
	- removed duplicate of macro CONFIG_VSC9953_PAUSE_CFG
	- code that fixed a small bug was moved in a new patch;

 drivers/net/vsc9953.c | 144 +++++++++++++++++++++++++-------------------------
 include/vsc9953.h     | 121 ++++++++++++++++++++++++++----------------
 2 files changed, 147 insertions(+), 118 deletions(-)

diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
index 068ab86..524b979 100644
--- a/drivers/net/vsc9953.c
+++ b/drivers/net/vsc9953.c
@@ -10,6 +10,8 @@
 #include <asm/fsl_serdes.h>
 #include <fm_eth.h>
 #include <fsl_memac.h>
+#include <errno.h>
+#include <malloc.h>
 #include <vsc9953.h>
 
 static struct vsc9953_info vsc9953_l2sw = {
@@ -25,50 +27,50 @@ static struct vsc9953_info vsc9953_l2sw = {
 		.port[9] = VSC9953_PORT_INFO_INITIALIZER(9),
 };
 
-void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus)
+void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus)
 {
-	if (!VSC9953_PORT_CHECK(port))
+	if (!VSC9953_PORT_CHECK(port_no))
 		return;
 
-	vsc9953_l2sw.port[port].bus = bus;
+	vsc9953_l2sw.port[port_no].bus = bus;
 }
 
-void vsc9953_port_info_set_phy_address(int port, int address)
+void vsc9953_port_info_set_phy_address(int port_no, int address)
 {
-	if (!VSC9953_PORT_CHECK(port))
+	if (!VSC9953_PORT_CHECK(port_no))
 		return;
 
-	vsc9953_l2sw.port[port].phyaddr = address;
+	vsc9953_l2sw.port[port_no].phyaddr = address;
 }
 
-void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int)
+void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int)
 {
-	if (!VSC9953_PORT_CHECK(port))
+	if (!VSC9953_PORT_CHECK(port_no))
 		return;
 
-	vsc9953_l2sw.port[port].enet_if = phy_int;
+	vsc9953_l2sw.port[port_no].enet_if = phy_int;
 }
 
-void vsc9953_port_enable(int port)
+void vsc9953_port_enable(int port_no)
 {
-	if (!VSC9953_PORT_CHECK(port))
+	if (!VSC9953_PORT_CHECK(port_no))
 		return;
 
-	vsc9953_l2sw.port[port].enabled = 1;
+	vsc9953_l2sw.port[port_no].enabled = 1;
 }
 
-void vsc9953_port_disable(int port)
+void vsc9953_port_disable(int port_no)
 {
-	if (!VSC9953_PORT_CHECK(port))
+	if (!VSC9953_PORT_CHECK(port_no))
 		return;
 
-	vsc9953_l2sw.port[port].enabled = 0;
+	vsc9953_l2sw.port[port_no].enabled = 0;
 }
 
 static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr,
 		int regnum, int value)
 {
-	int			timeout = 50000;
+	int timeout = 50000;
 
 	out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) |
 			((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) |
@@ -85,8 +87,8 @@ static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr,
 static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr,
 		int regnum)
 {
-	int			value = 0xFFFF;
-	int			timeout = 50000;
+	int value = 0xFFFF;
+	int timeout = 50000;
 
 	while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout)
 		udelay(1);
@@ -120,8 +122,8 @@ static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr,
 
 static int init_phy(struct eth_device *dev)
 {
-	struct vsc9953_port_info	*l2sw_port = dev->priv;
-	struct phy_device		*phydev = NULL;
+	struct vsc9953_port_info *l2sw_port = dev->priv;
+	struct phy_device *phydev = NULL;
 
 #ifdef CONFIG_PHYLIB
 	if (!l2sw_port->bus)
@@ -148,21 +150,21 @@ static int init_phy(struct eth_device *dev)
 	return 0;
 }
 
-static int vsc9953_port_init(int port)
+static int vsc9953_port_init(int port_no)
 {
-	struct eth_device		*dev;
+	struct eth_device *dev;
 
 	/* Internal ports never have a PHY */
-	if (VSC9953_INTERNAL_PORT_CHECK(port))
+	if (VSC9953_INTERNAL_PORT_CHECK(port_no))
 		return 0;
 
 	/* alloc eth device */
 	dev = (struct eth_device *)calloc(1, sizeof(struct eth_device));
 	if (!dev)
-		return 1;
+		return -ENOMEM;
 
-	sprintf(dev->name, "SW at PORT%d", port);
-	dev->priv = &vsc9953_l2sw.port[port];
+	sprintf(dev->name, "SW at PORT%d", port_no);
+	dev->priv = &vsc9953_l2sw.port[port_no];
 	dev->init = NULL;
 	dev->halt = NULL;
 	dev->send = NULL;
@@ -170,7 +172,7 @@ static int vsc9953_port_init(int port)
 
 	if (init_phy(dev)) {
 		free(dev);
-		return 1;
+		return -ENODEV;
 	}
 
 	return 0;
@@ -178,13 +180,15 @@ static int vsc9953_port_init(int port)
 
 void vsc9953_init(bd_t *bis)
 {
-	u32				i, hdx_cfg = 0, phy_addr = 0;
-	int				timeout;
-	struct vsc9953_system_reg	*l2sys_reg;
-	struct vsc9953_qsys_reg		*l2qsys_reg;
-	struct vsc9953_dev_gmii		*l2dev_gmii_reg;
-	struct vsc9953_analyzer		*l2ana_reg;
-	struct vsc9953_devcpu_gcb	*l2dev_gcb;
+	u32 i;
+	u32 hdx_cfg = 0;
+	u32 phy_addr = 0;
+	int timeout;
+	struct vsc9953_system_reg *l2sys_reg;
+	struct vsc9953_qsys_reg *l2qsys_reg;
+	struct vsc9953_dev_gmii *l2dev_gmii_reg;
+	struct vsc9953_analyzer *l2ana_reg;
+	struct vsc9953_devcpu_gcb *l2dev_gcb;
 
 	l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET +
 			VSC9953_DEV_GMII_OFFSET);
@@ -312,83 +316,81 @@ void vsc9953_init(bd_t *bis)
 
 #ifdef CONFIG_VSC9953_CMD
 /* Enable/disable status of a VSC9953 port */
-static void vsc9953_port_status_set(int port_nr, u8 enabled)
+static void vsc9953_port_status_set(int port_no, u8 enabled)
 {
-	u32			val;
-	struct vsc9953_qsys_reg	*l2qsys_reg;
+	struct vsc9953_qsys_reg *l2qsys_reg;
 
 	/* Administrative down */
-	if (vsc9953_l2sw.port[port_nr].enabled == 0)
+	if (!vsc9953_l2sw.port[port_no].enabled)
 		return;
 
 	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
 			VSC9953_QSYS_OFFSET);
 
-	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]);
-	if (enabled == 1)
-		val |= (1 << 13);
+	if (enabled)
+		setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
+			     VSC9953_PORT_ENA);
 	else
-		val &= ~(1 << 13);
-
-	out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val);
+		clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
+			     VSC9953_PORT_ENA);
 }
 
 /* Set all VSC9953 ports' status */
 static void vsc9953_port_all_status_set(u8 enabled)
 {
-	int		i;
+	int i;
 
 	for (i = 0; i < VSC9953_MAX_PORTS; i++)
 		vsc9953_port_status_set(i, enabled);
 }
 
 /* Start autonegotiation for a VSC9953 PHY */
-static void vsc9953_phy_autoneg(int port_nr)
+static void vsc9953_phy_autoneg(int port_no)
 {
-	if (!vsc9953_l2sw.port[port_nr].phydev)
+	if (!vsc9953_l2sw.port[port_no].phydev)
 		return;
 
-	if (vsc9953_l2sw.port[port_nr].phydev->drv->startup(
-			vsc9953_l2sw.port[port_nr].phydev))
-		printf("Failed to start PHY for port %d\n", port_nr);
+	if (vsc9953_l2sw.port[port_no].phydev->drv->startup(
+			vsc9953_l2sw.port[port_no].phydev))
+		printf("Failed to start PHY for port %d\n", port_no);
 }
 
 /* Start autonegotiation for all VSC9953 PHYs */
 static void vsc9953_phy_all_autoneg(void)
 {
-	int		i;
+	int i;
 
 	for (i = 0; i < VSC9953_MAX_PORTS; i++)
 		vsc9953_phy_autoneg(i);
 }
 
 /* Print a VSC9953 port's configuration */
-static void vsc9953_port_config_show(int port)
+static void vsc9953_port_config_show(int port_no)
 {
-	int			speed;
-	int			duplex;
-	int			link;
-	u8			enabled;
-	u32			val;
+	int speed;
+	int duplex;
+	int link;
+	u8 enabled;
+	u32 val;
 	struct vsc9953_qsys_reg	*l2qsys_reg;
 
 	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
 			VSC9953_QSYS_OFFSET);
 
-	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]);
-	enabled = vsc9953_l2sw.port[port].enabled &
-			((val & 0x00002000) >> 13);
+	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]);
+	enabled = vsc9953_l2sw.port[port_no].enabled &&
+		  (val & VSC9953_PORT_ENA);
 
 	/* internal ports (8 and 9) are fixed */
-	if (VSC9953_INTERNAL_PORT_CHECK(port)) {
+	if (VSC9953_INTERNAL_PORT_CHECK(port_no)) {
 		link = 1;
 		speed = SPEED_2500;
 		duplex = DUPLEX_FULL;
 	} else {
-		if (vsc9953_l2sw.port[port].phydev) {
-			link = vsc9953_l2sw.port[port].phydev->link;
-			speed = vsc9953_l2sw.port[port].phydev->speed;
-			duplex = vsc9953_l2sw.port[port].phydev->duplex;
+		if (vsc9953_l2sw.port[port_no].phydev) {
+			link = vsc9953_l2sw.port[port_no].phydev->link;
+			speed = vsc9953_l2sw.port[port_no].phydev->speed;
+			duplex = vsc9953_l2sw.port[port_no].phydev->duplex;
 		} else {
 			link = -1;
 			speed = -1;
@@ -396,7 +398,7 @@ static void vsc9953_port_config_show(int port)
 		}
 	}
 
-	printf("%8d ", port);
+	printf("%8d ", port_no);
 	printf("%8s ", enabled == 1 ? "enabled" : "disabled");
 	printf("%8s ", link == 1 ? "up" : "down");
 
@@ -426,7 +428,7 @@ static void vsc9953_port_config_show(int port)
 /* Print VSC9953 ports' configuration */
 static void vsc9953_port_all_config_show(void)
 {
-	int		i;
+	int i;
 
 	for (i = 0; i < VSC9953_MAX_PORTS; i++)
 		vsc9953_port_config_show(i);
@@ -487,11 +489,11 @@ static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 U_BOOT_CMD(ethsw, 5, 0, do_ethsw,
 	   "vsc9953 l2 switch commands",
-	   "port <port_nr> enable|disable\n"
+	   "port <port_no> enable|disable\n"
 	   "    - enable/disable an l2 switch port\n"
-	   "      port_nr=0..9; use \"all\" for all ports\n"
-	   "ethsw port <port_nr> show\n"
+	   "      port_no=0..9; use \"all\" for all ports\n"
+	   "ethsw port <port_no> show\n"
 	   "    - show an l2 switch port's configuration\n"
-	   "      port_nr=0..9; use \"all\" for all ports\n"
+	   "      port_no=0..9; use \"all\" for all ports\n"
 );
 #endif /* CONFIG_VSC9953_CMD */
diff --git a/include/vsc9953.h b/include/vsc9953.h
index 3f14dad..6ebe141 100644
--- a/include/vsc9953.h
+++ b/include/vsc9953.h
@@ -17,7 +17,6 @@
 #include <config.h>
 #include <miiphy.h>
 #include <asm/types.h>
-#include <malloc.h>
 
 #define VSC9953_OFFSET			(CONFIG_SYS_CCSRBAR_DEFAULT + 0x800000)
 
@@ -33,29 +32,57 @@
 #define T1040_SWITCH_GMII_DEV_OFFSET	0x010000
 #define VSC9953_PHY_REGS_OFFST		0x0000AC
 
+/* Macros for vsc9953_chip_regs.soft_rst register */
 #define VSC9953_SOFT_SWC_RST_ENA	0x00000001
+
+/* Macros for vsc9953_sys_sys.reset_cfg register */
 #define VSC9953_CORE_ENABLE		0x80
 #define VSC9953_MEM_ENABLE		0x40
 #define VSC9953_MEM_INIT		0x20
 
-#define VSC9953_PORT_ENA		0x00003a00
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_ena_cfg register */
 #define VSC9953_MAC_ENA_CFG		0x00000011
+
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_mode_cfg register */
 #define VSC9953_MAC_MODE_CFG		0x00000011
+
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_ifg_cfg register */
 #define VSC9953_MAC_IFG_CFG		0x00000515
+
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_hdx_cfg register */
 #define VSC9953_MAC_HDX_CFG		0x00001043
+
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_maxlen_cfg register */
+#define VSC9953_MAC_MAX_LEN		0x000005ee
+
+/* Macros for vsc9953_dev_gmii_port_mode.clock_cfg register */
 #define VSC9953_CLOCK_CFG		0x00000001
 #define VSC9953_CLOCK_CFG_1000M		0x00000001
+
+/* Macros for vsc9953_sys_sys.front_port_mode register */
+#define VSC9953_FRONT_PORT_MODE	0x00000000
+
+/* Macros for vsc9953_ana_pfc.pfc_cfg register */
 #define VSC9953_PFC_FC			0x00000001
 #define VSC9953_PFC_FC_QSGMII		0x00000000
+
+/* Macros for vsc9953_sys_pause_cfg.mac_fc_cfg register */
 #define VSC9953_MAC_FC_CFG		0x04700000
 #define VSC9953_MAC_FC_CFG_QSGMII	0x00700000
+
+/* Macros for vsc9953_sys_pause_cfg.pause_cfg register */
 #define VSC9953_PAUSE_CFG		0x001ffffe
+
+/* Macros for vsc9953_sys_pause_cfgtot_tail_drop_lvl register */
 #define VSC9953_TOT_TAIL_DROP_LVL	0x000003ff
-#define VSC9953_FRONT_PORT_MODE		0x00000000
-#define VSC9953_MAC_MAX_LEN		0x000005ee
 
+/* Macros for vsc9953_vcap_core_cfg.vcap_mv_cfg register */
 #define VSC9953_VCAP_MV_CFG		0x0000ffff
 #define VSC9953_VCAP_UPDATE_CTRL	0x01000004
+
+/* Macros for vsc9953_qsys_sys.switch_port_mode register */
+#define VSC9953_PORT_ENA		0x00003a00
+
 #define VSC9953_MAX_PORTS		10
 #define VSC9953_PORT_CHECK(port)	\
 	(((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1)
@@ -74,9 +101,9 @@ struct vsc9953_mdio_info {
 	char	*name;
 };
 
-/* VSC9953 ANA structure for T1040 U-boot*/
+/* VSC9953 ANA structure */
 
-struct	vsc9953_ana_port {
+struct vsc9953_ana_port {
 	u32	vlan_cfg;
 	u32	drop_cfg;
 	u32	qos_cfg;
@@ -138,7 +165,7 @@ struct vsc9953_ana_pgid {
 	u32	port_grp_id[91];
 };
 
-struct	vsc9953_ana_pfc {
+struct vsc9953_ana_pfc {
 	u32	pfc_cfg;
 	u32	reserved1[15];
 };
@@ -149,7 +176,7 @@ struct vsc9953_ana_pol_misc {
 	u32	pol_hyst;
 };
 
-struct	vsc9953_ana_common {
+struct vsc9953_ana_common {
 	u32	aggr_cfg;
 	u32	cpuq_cfg;
 	u32	cpuq_8021_cfg;
@@ -176,18 +203,18 @@ struct vsc9953_analyzer {
 	u32	reserved5[196];
 	struct vsc9953_ana_common	common;
 };
-/* END VSC9953 ANA structure for T1040 U-boot*/
+/* END VSC9953 ANA structure t*/
 
-/* VSC9953 DEV_GMII structure for T1040 U-boot*/
+/* VSC9953 DEV_GMII structure */
 
-struct	vsc9953_dev_gmii_port_mode {
+struct vsc9953_dev_gmii_port_mode {
 	u32	clock_cfg;
 	u32	port_misc;
 	u32	reserved1;
 	u32	eee_cfg;
 };
 
-struct	vsc9953_dev_gmii_mac_cfg_status {
+struct vsc9953_dev_gmii_mac_cfg_status {
 	u32	mac_ena_cfg;
 	u32	mac_mode_cfg;
 	u32	mac_maxlen_cfg;
@@ -205,11 +232,11 @@ struct vsc9953_dev_gmii {
 	struct vsc9953_dev_gmii_mac_cfg_status	mac_cfg_status;
 };
 
-/* END VSC9953 DEV_GMII structure for T1040 U-boot*/
+/* END VSC9953 DEV_GMII structure */
 
-/* VSC9953 QSYS structure for T1040 U-boot*/
+/* VSC9953 QSYS structure */
 
-struct	vsc9953_qsys_hsch {
+struct vsc9953_qsys_hsch {
 	u32	cir_cfg;
 	u32	reserved1;
 	u32	se_cfg;
@@ -218,7 +245,7 @@ struct	vsc9953_qsys_hsch {
 	u32	reserved2[20];
 };
 
-struct	vsc9953_qsys_sys {
+struct vsc9953_qsys_sys {
 	u32	port_mode[12];
 	u32	switch_port_mode[11];
 	u32	stat_cnt_cfg;
@@ -232,32 +259,32 @@ struct	vsc9953_qsys_sys {
 	u32	reserved1[23];
 };
 
-struct	vsc9953_qsys_qos_cfg {
+struct vsc9953_qsys_qos_cfg {
 	u32	red_profile[16];
 	u32	res_qos_mode;
 };
 
-struct	vsc9953_qsys_drop_cfg {
+struct vsc9953_qsys_drop_cfg {
 	u32	egr_drop_mode;
 };
 
-struct	vsc9953_qsys_mmgt {
+struct vsc9953_qsys_mmgt {
 	u32	eq_cntrl;
 	u32	reserved1;
 };
 
-struct	vsc9953_qsys_hsch_misc {
+struct vsc9953_qsys_hsch_misc {
 	u32	hsch_misc_cfg;
 	u32	reserved1[546];
 };
 
-struct	vsc9953_qsys_res_ctrl {
+struct vsc9953_qsys_res_ctrl {
 	u32	res_cfg;
 	u32	res_stat;
 
 };
 
-struct	vsc9953_qsys_reg {
+struct vsc9953_qsys_reg {
 	struct vsc9953_qsys_hsch	hsch[108];
 	struct vsc9953_qsys_sys	sys;
 	struct vsc9953_qsys_qos_cfg	qos_cfg;
@@ -267,18 +294,18 @@ struct	vsc9953_qsys_reg {
 	struct vsc9953_qsys_res_ctrl	res_ctrl[1024];
 };
 
-/* END VSC9953 QSYS structure for T1040 U-boot*/
+/* END VSC9953 QSYS structure */
 
-/* VSC9953 SYS structure for T1040 U-boot*/
+/* VSC9953 SYS structure */
 
-struct	vsc9953_sys_stat {
+struct vsc9953_sys_stat {
 	u32	rx_cntrs[64];
 	u32	tx_cntrs[64];
 	u32	drop_cntrs[64];
 	u32	reserved1[6];
 };
 
-struct	vsc9953_sys_sys {
+struct vsc9953_sys_sys {
 	u32	reset_cfg;
 	u32	reserved1;
 	u32	vlan_etype_cfg;
@@ -289,7 +316,7 @@ struct	vsc9953_sys_sys {
 	u32	reserved2[50];
 };
 
-struct	vsc9953_sys_pause_cfg {
+struct vsc9953_sys_pause_cfg {
 	u32	pause_cfg[11];
 	u32	pause_tot_cfg;
 	u32	tail_drop_level[11];
@@ -297,29 +324,29 @@ struct	vsc9953_sys_pause_cfg {
 	u32	mac_fc_cfg[10];
 };
 
-struct	vsc9953_sys_mmgt {
+struct vsc9953_sys_mmgt {
 	u16	free_cnt;
 };
 
-struct	vsc9953_system_reg {
+struct vsc9953_system_reg {
 	struct vsc9953_sys_stat	stat;
 	struct vsc9953_sys_sys	sys;
 	struct vsc9953_sys_pause_cfg	pause_cfg;
 	struct vsc9953_sys_mmgt	mmgt;
 };
 
-/* END VSC9953 SYS structure for T1040 U-boot*/
+/* END VSC9953 SYS structure */
 
 
-/* VSC9953 DEVCPU_GCB structure for T1040 U-boot*/
+/* VSC9953 DEVCPU_GCB structure */
 
-struct	vsc9953_chip_regs {
+struct vsc9953_chip_regs {
 	u32	chipd_id;
 	u32	gpr;
 	u32	soft_rst;
 };
 
-struct	vsc9953_gpio {
+struct vsc9953_gpio {
 	u32	gpio_out_set[10];
 	u32	gpio_out_clr[10];
 	u32	gpio_out[10];
@@ -338,31 +365,31 @@ struct vsc9953_mii_mng {
 	u32	miiscan_lst_rslts_valid;
 };
 
-struct	vsc9953_mii_read_scan {
+struct vsc9953_mii_read_scan {
 	u32	mii_scan_results_sticky[2];
 };
 
-struct	vsc9953_devcpu_gcb {
+struct vsc9953_devcpu_gcb {
 	struct vsc9953_chip_regs	chip_regs;
 	struct vsc9953_gpio		gpio;
 	struct vsc9953_mii_mng	mii_mng[2];
 	struct vsc9953_mii_read_scan	mii_read_scan;
 };
 
-/* END VSC9953 DEVCPU_GCB structure for T1040 U-boot*/
+/* END VSC9953 DEVCPU_GCB structure */
 
-/* VSC9953 IS* structure for T1040 U-boot*/
+/* VSC9953 IS* structure */
 
-struct	vsc9953_vcap_core_cfg	{
+struct vsc9953_vcap_core_cfg {
 	u32	vcap_update_ctrl;
 	u32	vcap_mv_cfg;
 };
 
-struct	vsc9953_vcap {
-struct	vsc9953_vcap_core_cfg	vcap_core_cfg;
+struct vsc9953_vcap {
+	struct vsc9953_vcap_core_cfg	vcap_core_cfg;
 };
 
-/* END VSC9953 IS* structure for T1040 U-boot*/
+/* END VSC9953 IS* structure */
 
 #define VSC9953_PORT_INFO_INITIALIZER(idx) \
 {									\
@@ -388,15 +415,15 @@ struct vsc9953_port_info {
 
 /* Structure to describe a VSC9953 switch */
 struct vsc9953_info {
-	struct	vsc9953_port_info	port[VSC9953_MAX_PORTS];
+	struct vsc9953_port_info	port[VSC9953_MAX_PORTS];
 };
 
 void vsc9953_init(bd_t *bis);
 
-void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus);
-void vsc9953_port_info_set_phy_address(int port, int address);
-void vsc9953_port_enable(int port);
-void vsc9953_port_disable(int port);
-void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int);
+void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus);
+void vsc9953_port_info_set_phy_address(int port_no, int address);
+void vsc9953_port_enable(int port_no);
+void vsc9953_port_disable(int port_no);
+void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int);
 
 #endif /* _VSC9953_H_ */
-- 
1.9.3



More information about the U-Boot mailing list