[U-Boot] [PATCH 090/172] ddr: altera: Trivial mem_calibrate() indent cleanup
Marek Vasut
marex at denx.de
Mon Jul 27 22:50:53 CEST 2015
Redo the mega-condition such that if the calibration is to be skipped,
the positive branch of the condition does all the work and returns.
The negative branch, which is in fact the default behavior, is then
converted to a code which is no longer conditional. This trims down
the indent by one level.
Signed-off-by: Marek Vasut <marex at denx.de>
---
drivers/ddr/altera/sequencer.c | 249 +++++++++++++++++++++--------------------
1 file changed, 129 insertions(+), 120 deletions(-)
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 874868d..77a1308 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -3295,152 +3295,161 @@ static uint32_t mem_calibrate(void)
scc_set_bypass_mode(i);
}
+ /* Calibration is skipped. */
if ((dyn_calib_steps & CALIB_SKIP_ALL) == CALIB_SKIP_ALL) {
/*
* Set VFIFO and LFIFO to instant-on settings in skip
* calibration mode.
*/
mem_skip_calibrate();
- } else {
- for (i = 0; i < NUM_CALIB_REPEAT; i++) {
- /*
- * Zero all delay chain/phase settings for all
- * groups and all shadow register sets.
- */
- scc_mgr_zero_all();
-
- run_groups = ~param->skip_groups;
-
- for (write_group = 0, write_test_bgn = 0; write_group
- < RW_MGR_MEM_IF_WRITE_DQS_WIDTH; write_group++,
- write_test_bgn += RW_MGR_MEM_DQ_PER_WRITE_DQS) {
- /* Initialized the group failure */
- group_failed = 0;
-
- current_run = run_groups & ((1 <<
- RW_MGR_NUM_DQS_PER_WRITE_GROUP) - 1);
- run_groups = run_groups >>
- RW_MGR_NUM_DQS_PER_WRITE_GROUP;
-
- if (current_run == 0)
- continue;
- writel(write_group, SDR_PHYGRP_SCCGRP_ADDRESS |
- SCC_MGR_GROUP_COUNTER_OFFSET);
- scc_mgr_zero_group(write_group, 0);
+ /*
+ * Do not remove this line as it makes sure all of our
+ * decisions have been applied.
+ */
+ writel(0, &sdr_scc_mgr->update);
+ return 1;
+ }
- for (read_group = write_group *
- RW_MGR_MEM_IF_READ_DQS_WIDTH /
- RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
- read_test_bgn = 0;
- read_group < (write_group + 1) *
- RW_MGR_MEM_IF_READ_DQS_WIDTH /
- RW_MGR_MEM_IF_WRITE_DQS_WIDTH &&
- group_failed == 0;
- read_group++, read_test_bgn +=
- RW_MGR_MEM_DQ_PER_READ_DQS) {
- /* Calibrate the VFIFO */
- if (!((STATIC_CALIB_STEPS) &
- CALIB_SKIP_VFIFO)) {
- if (!rw_mgr_mem_calibrate_vfifo
- (read_group,
- read_test_bgn)) {
- group_failed = 1;
-
- if (!(gbl->
- phy_debug_mode_flags &
- PHY_DEBUG_SWEEP_ALL_GROUPS)) {
- return 0;
- }
+ /* Calibration is not skipped. */
+ for (i = 0; i < NUM_CALIB_REPEAT; i++) {
+ /*
+ * Zero all delay chain/phase settings for all
+ * groups and all shadow register sets.
+ */
+ scc_mgr_zero_all();
+
+ run_groups = ~param->skip_groups;
+
+ for (write_group = 0, write_test_bgn = 0; write_group
+ < RW_MGR_MEM_IF_WRITE_DQS_WIDTH; write_group++,
+ write_test_bgn += RW_MGR_MEM_DQ_PER_WRITE_DQS) {
+ /* Initialized the group failure */
+ group_failed = 0;
+
+ current_run = run_groups & ((1 <<
+ RW_MGR_NUM_DQS_PER_WRITE_GROUP) - 1);
+ run_groups = run_groups >>
+ RW_MGR_NUM_DQS_PER_WRITE_GROUP;
+
+ if (current_run == 0)
+ continue;
+
+ writel(write_group, SDR_PHYGRP_SCCGRP_ADDRESS |
+ SCC_MGR_GROUP_COUNTER_OFFSET);
+ scc_mgr_zero_group(write_group, 0);
+
+ for (read_group = write_group *
+ RW_MGR_MEM_IF_READ_DQS_WIDTH /
+ RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
+ read_test_bgn = 0;
+ read_group < (write_group + 1) *
+ RW_MGR_MEM_IF_READ_DQS_WIDTH /
+ RW_MGR_MEM_IF_WRITE_DQS_WIDTH &&
+ group_failed == 0;
+ read_group++, read_test_bgn +=
+ RW_MGR_MEM_DQ_PER_READ_DQS) {
+ /* Calibrate the VFIFO */
+ if (!((STATIC_CALIB_STEPS) &
+ CALIB_SKIP_VFIFO)) {
+ if (!rw_mgr_mem_calibrate_vfifo
+ (read_group,
+ read_test_bgn)) {
+ group_failed = 1;
+
+ if (!(gbl->
+ phy_debug_mode_flags &
+ PHY_DEBUG_SWEEP_ALL_GROUPS)) {
+ return 0;
}
}
}
+ }
- /* Calibrate the output side */
- if (group_failed == 0) {
- for (rank_bgn = 0, sr = 0; rank_bgn
- < RW_MGR_MEM_NUMBER_OF_RANKS;
- rank_bgn +=
- NUM_RANKS_PER_SHADOW_REG,
- ++sr) {
- sr_failed = 0;
- if (!((STATIC_CALIB_STEPS) &
- CALIB_SKIP_WRITES)) {
- if ((STATIC_CALIB_STEPS)
- & CALIB_SKIP_DELAY_SWEEPS) {
- /* not needed in quick mode! */
- } else {
- /*
- * Determine if this set of
- * ranks should be skipped
- * entirely.
- */
- if (!param->skip_shadow_regs[sr]) {
- if (!rw_mgr_mem_calibrate_writes
- (rank_bgn, write_group,
- write_test_bgn)) {
- sr_failed = 1;
- if (!(gbl->
- phy_debug_mode_flags &
- PHY_DEBUG_SWEEP_ALL_GROUPS)) {
- return 0;
- }
- }
+ /* Calibrate the output side */
+ if (group_failed == 0) {
+ for (rank_bgn = 0, sr = 0; rank_bgn
+ < RW_MGR_MEM_NUMBER_OF_RANKS;
+ rank_bgn +=
+ NUM_RANKS_PER_SHADOW_REG,
+ ++sr) {
+ sr_failed = 0;
+ if (!((STATIC_CALIB_STEPS) &
+ CALIB_SKIP_WRITES)) {
+ if ((STATIC_CALIB_STEPS)
+ & CALIB_SKIP_DELAY_SWEEPS) {
+ /* not needed in quick mode! */
+ } else {
+ /*
+ * Determine if this set of
+ * ranks should be skipped
+ * entirely.
+ */
+ if (!param->skip_shadow_regs[sr]) {
+ if (!rw_mgr_mem_calibrate_writes
+ (rank_bgn, write_group,
+ write_test_bgn)) {
+ sr_failed = 1;
+ if (!(gbl->
+ phy_debug_mode_flags &
+ PHY_DEBUG_SWEEP_ALL_GROUPS)) {
+ return 0;
+ }
}
}
}
- if (sr_failed != 0)
- group_failed = 1;
}
+ if (sr_failed != 0)
+ group_failed = 1;
}
+ }
- if (group_failed == 0) {
- for (read_group = write_group *
- RW_MGR_MEM_IF_READ_DQS_WIDTH /
- RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
- read_test_bgn = 0;
- read_group < (write_group + 1)
- * RW_MGR_MEM_IF_READ_DQS_WIDTH
- / RW_MGR_MEM_IF_WRITE_DQS_WIDTH &&
- group_failed == 0;
- read_group++, read_test_bgn +=
- RW_MGR_MEM_DQ_PER_READ_DQS) {
- if (!((STATIC_CALIB_STEPS) &
- CALIB_SKIP_WRITES)) {
- if (!rw_mgr_mem_calibrate_vfifo_end
- (read_group, read_test_bgn)) {
- group_failed = 1;
-
- if (!(gbl->phy_debug_mode_flags
- & PHY_DEBUG_SWEEP_ALL_GROUPS)) {
- return 0;
- }
+ if (group_failed == 0) {
+ for (read_group = write_group *
+ RW_MGR_MEM_IF_READ_DQS_WIDTH /
+ RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
+ read_test_bgn = 0;
+ read_group < (write_group + 1)
+ * RW_MGR_MEM_IF_READ_DQS_WIDTH
+ / RW_MGR_MEM_IF_WRITE_DQS_WIDTH &&
+ group_failed == 0;
+ read_group++, read_test_bgn +=
+ RW_MGR_MEM_DQ_PER_READ_DQS) {
+ if (!((STATIC_CALIB_STEPS) &
+ CALIB_SKIP_WRITES)) {
+ if (!rw_mgr_mem_calibrate_vfifo_end
+ (read_group, read_test_bgn)) {
+ group_failed = 1;
+
+ if (!(gbl->phy_debug_mode_flags
+ & PHY_DEBUG_SWEEP_ALL_GROUPS)) {
+ return 0;
}
}
}
}
-
- if (group_failed != 0)
- failing_groups++;
}
+ if (group_failed != 0)
+ failing_groups++;
+ }
+
+ /*
+ * USER If there are any failing groups then report
+ * the failure.
+ */
+ if (failing_groups != 0)
+ return 0;
+
+ /* Calibrate the LFIFO */
+ if (!((STATIC_CALIB_STEPS) & CALIB_SKIP_LFIFO)) {
/*
- * USER If there are any failing groups then report
- * the failure.
+ * If we're skipping groups as part of debug,
+ * don't calibrate LFIFO.
*/
- if (failing_groups != 0)
- return 0;
-
- /* Calibrate the LFIFO */
- if (!((STATIC_CALIB_STEPS) & CALIB_SKIP_LFIFO)) {
- /*
- * If we're skipping groups as part of debug,
- * don't calibrate LFIFO.
- */
- if (param->skip_groups == 0) {
- if (!rw_mgr_mem_calibrate_lfifo())
- return 0;
- }
+ if (param->skip_groups == 0) {
+ if (!rw_mgr_mem_calibrate_lfifo())
+ return 0;
}
}
}
--
2.1.4
More information about the U-Boot
mailing list