[U-Boot] [PATCH 091/172] ddr: altera: Internal mem_calibrate() cleanup part 1

Marek Vasut marex at denx.de
Mon Jul 27 22:50:54 CEST 2015


This is kind of microseries-within-series indent cleanup.
Rework the code for the first loop within the middle-loop
of the mega-loop to make it actually readable and not an
insane cryptic pile of indent failure.

It is likely that this patch has checkpatch warnings, but
for the sake of not breaking the code, these are ignored.

No functional change.

Signed-off-by: Marek Vasut <marex at denx.de>
---
 drivers/ddr/altera/sequencer.c | 40 +++++++++++++++++-----------------------
 1 file changed, 17 insertions(+), 23 deletions(-)

diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 77a1308..59c09b6 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -3270,6 +3270,9 @@ static uint32_t mem_calibrate(void)
 	uint32_t group_failed = 0;
 	uint32_t sr_failed = 0;
 
+	const u32 rwdqs_ratio = RW_MGR_MEM_IF_READ_DQS_WIDTH /
+				RW_MGR_MEM_IF_WRITE_DQS_WIDTH;
+
 	debug("%s:%d\n", __func__, __LINE__);
 
 	/* Initialize the data settings */
@@ -3339,31 +3342,22 @@ static uint32_t mem_calibrate(void)
 					    SCC_MGR_GROUP_COUNTER_OFFSET);
 			scc_mgr_zero_group(write_group, 0);
 
-			for (read_group = write_group *
-				RW_MGR_MEM_IF_READ_DQS_WIDTH /
-				RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
-				read_test_bgn = 0;
-				read_group < (write_group + 1) *
-				RW_MGR_MEM_IF_READ_DQS_WIDTH /
-				RW_MGR_MEM_IF_WRITE_DQS_WIDTH &&
-				group_failed == 0;
-				read_group++, read_test_bgn +=
-				RW_MGR_MEM_DQ_PER_READ_DQS) {
+			for (read_group = write_group * rwdqs_ratio,
+			     read_test_bgn = 0;
+			     read_group < (write_group + 1) * rwdqs_ratio && group_failed == 0;
+			     read_group++,
+			     read_test_bgn += RW_MGR_MEM_DQ_PER_READ_DQS) {
+				if (STATIC_CALIB_STEPS & CALIB_SKIP_VFIFO)
+					continue;
+
 				/* Calibrate the VFIFO */
-				if (!((STATIC_CALIB_STEPS) &
-					CALIB_SKIP_VFIFO)) {
-					if (!rw_mgr_mem_calibrate_vfifo
-						(read_group,
-						read_test_bgn)) {
-						group_failed = 1;
+				if (rw_mgr_mem_calibrate_vfifo(read_group,
+							       read_test_bgn))
+					continue;
 
-						if (!(gbl->
-						phy_debug_mode_flags &
-					PHY_DEBUG_SWEEP_ALL_GROUPS)) {
-							return 0;
-						}
-					}
-				}
+				group_failed = 1;
+				if (!(gbl->phy_debug_mode_flags & PHY_DEBUG_SWEEP_ALL_GROUPS))
+					return 0;
 			}
 
 			/* Calibrate the output side */
-- 
2.1.4



More information about the U-Boot mailing list