[U-Boot] [PATCH 092/172] ddr: altera: Internal mem_calibrate() cleanup part 2
Marek Vasut
marex at denx.de
Mon Jul 27 22:50:55 CEST 2015
This is kind of microseries-within-series indent cleanup.
Rework the code for the second loop within the middle-loop
of the mega-loop to make it actually readable and not an
insane cryptic pile of indent failure.
It is likely that this patch has checkpatch warnings, but
for the sake of not breaking the code, these are ignored.
No functional change.
Signed-off-by: Marek Vasut <marex at denx.de>
---
drivers/ddr/altera/sequencer.c | 57 ++++++++++++++++++------------------------
1 file changed, 24 insertions(+), 33 deletions(-)
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 59c09b6..e2e7184 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -3268,7 +3268,6 @@ static uint32_t mem_calibrate(void)
uint32_t run_groups, current_run;
uint32_t failing_groups = 0;
uint32_t group_failed = 0;
- uint32_t sr_failed = 0;
const u32 rwdqs_ratio = RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH;
@@ -3361,40 +3360,32 @@ static uint32_t mem_calibrate(void)
}
/* Calibrate the output side */
- if (group_failed == 0) {
- for (rank_bgn = 0, sr = 0; rank_bgn
- < RW_MGR_MEM_NUMBER_OF_RANKS;
- rank_bgn +=
- NUM_RANKS_PER_SHADOW_REG,
- ++sr) {
- sr_failed = 0;
- if (!((STATIC_CALIB_STEPS) &
- CALIB_SKIP_WRITES)) {
- if ((STATIC_CALIB_STEPS)
- & CALIB_SKIP_DELAY_SWEEPS) {
- /* not needed in quick mode! */
- } else {
+ if (group_failed == 0) {
+ for (rank_bgn = 0, sr = 0;
+ rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS;
+ rank_bgn += NUM_RANKS_PER_SHADOW_REG, sr++) {
+ if (STATIC_CALIB_STEPS & CALIB_SKIP_WRITES)
+ continue;
+
+ /* Not needed in quick mode! */
+ if (STATIC_CALIB_STEPS & CALIB_SKIP_DELAY_SWEEPS)
+ continue;
+
/*
- * Determine if this set of
- * ranks should be skipped
- * entirely.
+ * Determine if this set of ranks
+ * should be skipped entirely.
*/
- if (!param->skip_shadow_regs[sr]) {
- if (!rw_mgr_mem_calibrate_writes
- (rank_bgn, write_group,
- write_test_bgn)) {
- sr_failed = 1;
- if (!(gbl->
- phy_debug_mode_flags &
- PHY_DEBUG_SWEEP_ALL_GROUPS)) {
- return 0;
- }
- }
- }
- }
- }
- if (sr_failed != 0)
- group_failed = 1;
+ if (param->skip_shadow_regs[sr])
+ continue;
+
+ /* Calibrate WRITEs */
+ if (rw_mgr_mem_calibrate_writes(rank_bgn,
+ write_group, write_test_bgn))
+ continue;
+
+ group_failed = 1;
+ if (!(gbl->phy_debug_mode_flags & PHY_DEBUG_SWEEP_ALL_GROUPS))
+ return 0;
}
}
--
2.1.4
More information about the U-Boot
mailing list