[U-Boot] [GIT PULL] Zynq changes
Michal Simek
monstr at monstr.eu
Tue Jul 28 15:43:16 CEST 2015
Adding actual Tom's address.
Cheers,
Michal
On 07/28/2015 03:41 PM, Michal Simek wrote:
> Hi Tom,
>
> please pull these changes to your tree. The most of that changes are DT
> related which is simple synchronization DTSes with the kernel where
> binding was properly reviewed.
>
> Thanks,
> Michal
>
> The following changes since commit 26473945ad6667183296e7edee2a65edf31bb6f7:
>
> Merge branch 'master' of http://git.denx.de/u-boot-sunxi (2015-07-25
> 09:04:18 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-microblaze.git zynq
>
> for you to fetch changes up to 711e5e26b41457e658155e7c225c9ccfed0182ef:
>
> cmd_mp: Add support for showing all CPU status by one command
> (2015-07-28 11:56:29 +0200)
>
> ----------------------------------------------------------------
> Michal Simek (29):
> zynq: gem: Setting up WRAP bit for one TX bd
> zynqmp: mp: Simplify set_r5_start handling
> zynqmp: Add support for IP detection via SLCR
> ARM: zynq: DT: Use the right names for nodes
> ARM: zynq: DT: Add missing nodes to DTSI
> ARM: zynq: DT: Add a fixed regulator for CPU voltage
> ARM: zynq: DT: Migrate UART to Cadence binding
> ARM: zynq: DT: Remove 222 MHz OPP
> spi: Fix zynq SPI binding
> ARM: zynq: DT: Fix GEM register area size
> ARM: zynq: DT: Use the zynq binding with macb
> ARM: zynq: DT: Clean up timer device tree nodes
> ARM: zynq: DT: Cleanup address-cells and size-cells
> ARM: zynq: DT: Add pinctrl node
> ARM: zynq: DT: Add reference to bus node
> ARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel
> ARM: zynq: DT: Update years in copyright
> ARM: zynq: DT: Get rid of ps-clk-frequency
> ARM: zynq: DT: Add missing interrupt for L2 pl310
> ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys
> ARM: zynq: DT: Update zc770 dtses
> ARM: zynq: Add support for zc770-xm011
> ARM: zynqmp: Wire up ethernet controllers
> ARM: zynqmp: Wire up SATA for the board
> zynqmp: Show EL level where U-Boot runs
> net: gem: Extend timeout value
> zynq: Fix typo in Makefile about custom ps7_init file
> spi: zynq_spi: Simplify debug macro
> cmd_mp: Add support for showing all CPU status by one command
>
> Siva Durga Prasad Paladugu (7):
> zynqmp: gem: Set data bus width to 64bit for arm64
> zynqmp: gem: Flush the rx buffers while transmitting
> zynq: gem: Increase the Rx buffer descriptors to 32
> zynqmp: Kconfig: Move zynqmp Kconfig
> zynqmp: Define ep config for ZynqMP
> Kconfig: zynqmp: Move CONFIG_SYS_TEXT_BASE to defconfig
> zynqmp: Provide option to enable uart dcc support for zynqmp
>
> Kconfig | 2 +-
> arch/arm/Kconfig | 5 ++-
> arch/arm/cpu/armv8/Makefile | 2 +-
> arch/arm/cpu/armv8/zynqmp/Kconfig | 23
> ++++++++++
> arch/arm/cpu/armv8/zynqmp/Makefile | 1 +
> arch/arm/cpu/armv8/zynqmp/mp.c | 7 +--
> arch/arm/cpu/armv8/zynqmp/slcr.c | 63
> +++++++++++++++++++++++++++
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/zynq-7000.dtsi | 174
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
> arch/arm/dts/zynq-zc702.dts | 372
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> arch/arm/dts/zynq-zc706.dts | 293
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> arch/arm/dts/zynq-zc770-xm010.dts | 75
> +++++++++++++++++++++++++++++---
> arch/arm/dts/zynq-zc770-xm011.dts | 65
> ++++++++++++++++++++++++++++
> arch/arm/dts/zynq-zc770-xm012.dts | 51
> ++++++++++++++++++++--
> arch/arm/dts/zynq-zc770-xm013.dts | 62
> ++++++++++++++++++++++++--
> arch/arm/dts/zynq-zed.dts | 46
> ++++++++++++++++++--
> arch/arm/dts/zynq-zybo.dts | 38
> ++++++++++++++--
> arch/arm/include/asm/arch-zynqmp/hardware.h | 16
> +++++++
> arch/arm/include/asm/arch-zynqmp/sys_proto.h | 6 +++
> board/xilinx/zynq/Makefile | 2 +-
> board/xilinx/zynqmp/Kconfig | 15
> -------
> board/xilinx/zynqmp/MAINTAINERS | 5 ++-
> board/xilinx/zynqmp/zynqmp.c | 37
> ++++++++++++++++
> common/cmd_mp.c | 22
> ++++++++++
> configs/{xilinx_zynqmp_defconfig => xilinx_zynqmp_ep_defconfig} | 5 ++-
> configs/zynq_zc770_xm011_defconfig | 13
> ++++++
> doc/device-tree-bindings/spi/spi-zynq.txt | 35
> ++++++++-------
> drivers/net/zynq_gem.c | 26
> ++++++++---
> drivers/spi/zynq_spi.c | 4 +-
> include/configs/xilinx_zynqmp.h | 48
> +++++++++++++++++----
> include/configs/xilinx_zynqmp_ep.h | 27
> ++++++++++++
> include/configs/zynq_zc770.h | 3 ++
> 32 files changed, 1427 insertions(+), 117 deletions(-)
> create mode 100644 arch/arm/cpu/armv8/zynqmp/Kconfig
> create mode 100644 arch/arm/cpu/armv8/zynqmp/slcr.c
> create mode 100644 arch/arm/dts/zynq-zc770-xm011.dts
> delete mode 100644 board/xilinx/zynqmp/Kconfig
> rename configs/{xilinx_zynqmp_defconfig => xilinx_zynqmp_ep_defconfig}
> (81%)
> create mode 100644 configs/zynq_zc770_xm011_defconfig
> create mode 100644 include/configs/xilinx_zynqmp_ep.h
>
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150728/faf1785d/attachment.sig>
More information about the U-Boot
mailing list