[U-Boot] [PATCH 4/9] x86: Move MP initialization codes into a common place

[Bin Meng]

Most of the MP initialization codes in arch/x86/cpu/baytrail/cpu.c is
common to all x86 processors, except detect_num_cpus() which varies
from cpu to cpu. Move these to arch/x86/cpu/cpu.c and declare a weak
detect_num_cpus() which just returns 2 which is minimally required.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 arch/x86/cpu/baytrail/cpu.c | 44 +-----------------------------------------
 arch/x86/cpu/cpu.c          | 47 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+), 43 deletions(-)

diff --git a/arch/x86/cpu/baytrail/cpu.c b/arch/x86/cpu/baytrail/cpu.c
index 05156a5..7805056 100644
--- a/arch/x86/cpu/baytrail/cpu.c
+++ b/arch/x86/cpu/baytrail/cpu.c
@@ -12,23 +12,11 @@
 #include <asm/cpu.h>
 #include <asm/cpu_x86.h>
 #include <asm/lapic.h>
-#include <asm/mp.h>
 #include <asm/msr.h>
 #include <asm/turbo.h>
 
 #ifdef CONFIG_SMP
-static int enable_smis(struct udevice *cpu, void *unused)
-{
-	return 0;
-}
-
-static struct mp_flight_record mp_steps[] = {
-	MP_FR_BLOCK_APS(mp_init_cpu, NULL, mp_init_cpu, NULL),
-	/* Wait for APs to finish initialization before proceeding. */
-	MP_FR_BLOCK_APS(NULL, NULL, enable_smis, NULL),
-};
-
-static int detect_num_cpus(void)
+int detect_num_cpus(void)
 {
 	int ecx = 0;
 
@@ -52,38 +40,8 @@ static int detect_num_cpus(void)
 		ecx++;
 	}
 }
-
-static int baytrail_init_cpus(void)
-{
-	struct mp_params mp_params;
-
-	lapic_setup();
-
-	mp_params.num_cpus = detect_num_cpus();
-	mp_params.parallel_microcode_load = 0,
-	mp_params.flight_plan = &mp_steps[0];
-	mp_params.num_records = ARRAY_SIZE(mp_steps);
-	mp_params.microcode_pointer = 0;
-
-	if (mp_init(&mp_params)) {
-		printf("Warning: MP init failure\n");
-		return -EIO;
-	}
-
-	return 0;
-}
 #endif
 
-int x86_init_cpus(void)
-{
-#ifdef CONFIG_SMP
-	debug("Init additional CPUs\n");
-	baytrail_init_cpus();
-#endif
-
-	return 0;
-}
-
 static void set_max_freq(void)
 {
 	msr_t perf_ctl;
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index ffb6e43..ddc7dc3 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -21,10 +21,13 @@
 
 #include <common.h>
 #include <command.h>
+#include <dm.h>
 #include <errno.h>
 #include <malloc.h>
 #include <asm/control_regs.h>
 #include <asm/cpu.h>
+#include <asm/lapic.h>
+#include <asm/mp.h>
 #include <asm/post.h>
 #include <asm/processor.h>
 #include <asm/processor-flags.h>
@@ -601,8 +604,52 @@ int last_stage_init(void)
 }
 #endif
 
+#ifdef CONFIG_SMP
+static int enable_smis(struct udevice *cpu, void *unused)
+{
+	return 0;
+}
+
+static struct mp_flight_record mp_steps[] = {
+	MP_FR_BLOCK_APS(mp_init_cpu, NULL, mp_init_cpu, NULL),
+	/* Wait for APs to finish initialization before proceeding */
+	MP_FR_BLOCK_APS(NULL, NULL, enable_smis, NULL),
+};
+
+__weak int detect_num_cpus(void)
+{
+	/* We need at least 2 cores to perform mp_init() */
+	return 2;
+}
+
+static int x86_mp_init(void)
+{
+	struct mp_params mp_params;
+
+	lapic_setup();
+
+	mp_params.num_cpus = detect_num_cpus();
+	mp_params.parallel_microcode_load = 0,
+	mp_params.flight_plan = &mp_steps[0];
+	mp_params.num_records = ARRAY_SIZE(mp_steps);
+	mp_params.microcode_pointer = 0;
+
+	if (mp_init(&mp_params)) {
+		printf("Warning: MP init failure\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+#endif
+
 __weak int x86_init_cpus(void)
 {
+#ifdef CONFIG_SMP
+	debug("Init additional CPUs\n");
+	x86_mp_init();
+#endif
+
 	return 0;
 }
 
-- 
1.8.2.1