[U-Boot] [PATCH 0/6] spi: cadence_qspi: optimize & fix indirect read-writes

Vikas Manocha vikas.manocha at st.com
Mon Jun 15 20:19:28 CEST 2015


This patchset:
- removes sram polling while reading/writing from flash.
- fixes trigger base & transfer start address register programming. This fix
superseeds the previous patch "spi: cadence_qspi: Fix the indirect ahb trigger
address setting"
- adds support to get fifo width from device tree

Vikas Manocha (6):
  spi: cadence_qspi: remove sram polling from flash read
  spi: cadence_qspi: remove sram polling from flash write
  spi: cadence_qspi: move trigger base configuration in init
  spi: cadence_qspi: fix indirect read/write start address
  spi: cadence_qspi: fix base trigger address & transfer start address
  spi: cadence_qspi: get fifo width from device tree

 arch/arm/dts/socfpga.dtsi      |    2 +
 arch/arm/dts/stv0991.dts       |    4 +-
 drivers/spi/cadence_qspi.c     |   14 +++--
 drivers/spi/cadence_qspi.h     |    6 +-
 drivers/spi/cadence_qspi_apb.c |  124 +++++++++-------------------------------
 5 files changed, 43 insertions(+), 107 deletions(-)

-- 
1.7.9.5



More information about the U-Boot mailing list