[U-Boot] [PATCH 3/6] spi: cadence_qspi: move trigger base configuration in init

[Vikas Manocha]

Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
---
 drivers/spi/cadence_qspi_apb.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index 313f6ac..515d88e 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -467,6 +467,7 @@ void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat)
 
 	/* Indirect mode configurations */
 	writel((plat->sram_size/2), plat->regbase + CQSPI_REG_SRAMPARTITION);
+	writel((u32)plat->ahbbase, plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
 
 	/* Disable all interrupts */
 	writel(0, plat->regbase + CQSPI_REG_IRQMASK);
@@ -626,9 +627,6 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
 		/* for normal read (only ramtron as of now) */
 		addr_bytes = cmdlen - 1;
 
-	/* Setup the indirect trigger address */
-	writel((u32)plat->ahbbase, plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
-
 	/* Configure the opcode */
 	rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB;
 
@@ -723,8 +721,6 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
 		       cmdlen, (unsigned int)cmdbuf);
 		return -EINVAL;
 	}
-	/* Setup the indirect trigger address */
-	writel((u32)plat->ahbbase, plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
 
 	/* Configure the opcode */
 	reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB;
-- 
1.7.9.5