[U-Boot] [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash

[Vikas MANOCHA]

Hi Tom,

Can you please apply the stv0991 patchset.

Rgds,
Vikas

> -----Original Message-----
> From: Vikas MANOCHA
> Sent: Wednesday, May 27, 2015 6:43 PM
> To: u-boot at lists.denx.de
> Cc: Vikas MANOCHA
> Subject: [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash
> 
> This patchset enables cadence qspi controller for stv0991 soc.
> 
> Vikas Manocha (3):
>   stv0991: configure clock & pad muxing for qspi
>   stv0991: enable cadence qspi controller & spi flash
>   stv0991: configure device tree for cadence qspi & flash
> 
>  arch/arm/cpu/armv7/stv0991/clock.c                 |    4 ++-
>  arch/arm/cpu/armv7/stv0991/pinmux.c                |    5 +++
>  arch/arm/dts/stv0991.dts                           |   34 ++++++++++++++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_cgu.h    |   15 +++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_creg.h   |    9 ++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_periph.h |    2 ++
>  board/st/stv0991/stv0991.c                         |    8 +++++
>  include/configs/stv0991.h                          |   18 +++++++++++
>  8 files changed, 94 insertions(+), 1 deletion(-)
> 
> --
> 1.7.9.5