[U-Boot] [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash

[Jagan Teki]

On 16 June 2015 at 02:24, Vikas MANOCHA <vikas.manocha at st.com> wrote:
> Hi Tom,
>
> Can you please apply the stv0991 patchset.

As these were new feature additions I will take these into spi-next.

>
>> -----Original Message-----
>> From: Vikas MANOCHA
>> Sent: Wednesday, May 27, 2015 6:43 PM
>> To: u-boot at lists.denx.de
>> Cc: Vikas MANOCHA
>> Subject: [PATCH 0/3] stv0991: enable cadence qspi controller & spi flash
>>
>> This patchset enables cadence qspi controller for stv0991 soc.
>>
>> Vikas Manocha (3):
>>   stv0991: configure clock & pad muxing for qspi
>>   stv0991: enable cadence qspi controller & spi flash
>>   stv0991: configure device tree for cadence qspi & flash
>>
>>  arch/arm/cpu/armv7/stv0991/clock.c                 |    4 ++-
>>  arch/arm/cpu/armv7/stv0991/pinmux.c                |    5 +++
>>  arch/arm/dts/stv0991.dts                           |   34 ++++++++++++++++++++
>>  arch/arm/include/asm/arch-stv0991/stv0991_cgu.h    |   15 +++++++++
>>  arch/arm/include/asm/arch-stv0991/stv0991_creg.h   |    9 ++++++
>>  arch/arm/include/asm/arch-stv0991/stv0991_periph.h |    2 ++
>>  board/st/stv0991/stv0991.c                         |    8 +++++
>>  include/configs/stv0991.h                          |   18 +++++++++++
>>  8 files changed, 94 insertions(+), 1 deletion(-)
>>
>> --

thanks!
-- 
Jagan | openedev.