[U-Boot] [PATCH v3 4/4] arm: ls102xa: Enable Driver Model SPI for ls1021atwr

[Simon Glass]

Hi,

On 17 June 2015 at 03:36, Bin Meng <bmeng.cn at gmail.com> wrote:
> Hi Haikun,
>
> On Mon, May 18, 2015 at 9:25 PM, Haikun Wang <haikun.wang at freescale.com> wrote:
>> From: Haikun Wang <Haikun.Wang at freescale.com>
>>
>> Enable Driver Model SPI for ls1021atwr board.
>> DSPI and QSPI only be enabled when boot from QSPI.
>> DSPI and QSPI are compatible under Driver Model SPI.
>>
>> Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
>> Change-Id: I6342807da7725ae8b678952117c8758c75a61d3d
>> Reviewed-on: http://git.am.freescale.net:8181/33447
>
> Is this URL Freescale internal? I cannot access it.
>

Looks like it. BTW patman will remove these Gerrit tags automatically.

>> Tested-by: Review Code-CDREVIEW <CDREVIEW at freescale.com>
>> Reviewed-by: Prabhakar Kushwaha <prabhakar at freescale.com>
>> ---
>> Changes in v3:
>> - IS_ENABLED(CONFIG_XXX) is only work with configure option in Kconfig,
>>   and DM core code use IS_ENABLED(), so configure option in head file
>>   can't work, so remove CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_DM CONFIG_DM_SPI
>>
>> Changes in v2:
>> - Move all changes inside of CONFIG_QSPI_BOOT
>>
>> Changes in v1: None
>>  include/configs/ls1021atwr.h | 10 ++++++++--
>>  1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
>> index 729205f..13e3aa4 100644
>> --- a/include/configs/ls1021atwr.h
>> +++ b/include/configs/ls1021atwr.h
>> @@ -229,16 +229,22 @@
>>  #define CONFIG_CMD_FAT
>>  #define CONFIG_DOS_PARTITION
>>
>> -/* QSPI */
>> +/* SPI */
>>  #ifdef CONFIG_QSPI_BOOT
>> +/* QSPI */
>>  #define CONFIG_FSL_QSPI
>>  #define QSPI0_AMBA_BASE                        0x40000000
>>  #define FSL_QSPI_FLASH_SIZE            (1 << 24)
>>  #define FSL_QSPI_FLASH_NUM             2
>>
>> +#define CONFIG_SPI_FLASH_STMICRO
>> +
>> +/* DM SPI */
>> +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
>>  #define CONFIG_CMD_SF
>> +#define CONFIG_DM_SPI_FLASH
>>  #define CONFIG_SPI_FLASH
>> -#define CONFIG_SPI_FLASH_STMICRO
>> +#endif
>>  #endif
>>
>>  /*
>> --

Regards,
Simon