[U-Boot] [PATCH v3 4/4] arm: ls102xa: Enable Driver Model SPI for ls1021atwr

Jagan Teki jteki at openedev.com
Thu Jun 18 08:54:04 CEST 2015


On 18 June 2015 at 07:50, Wang Haikun <Haikun.Wang at freescale.com> wrote:
> On 6/17/2015 8:30 PM, Simon Glass wrote:
>> Hi,
>>
>> On 17 June 2015 at 03:36, Bin Meng <bmeng.cn at gmail.com> wrote:
>>> Hi Haikun,
>>>
>>> On Mon, May 18, 2015 at 9:25 PM, Haikun Wang <haikun.wang at freescale.com> wrote:
>>>> From: Haikun Wang <Haikun.Wang at freescale.com>
>>>>
>>>> Enable Driver Model SPI for ls1021atwr board.
>>>> DSPI and QSPI only be enabled when boot from QSPI.
>>>> DSPI and QSPI are compatible under Driver Model SPI.
>>>>
>>>> Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
>>>> Change-Id: I6342807da7725ae8b678952117c8758c75a61d3d
>>>> Reviewed-on: http://git.am.freescale.net:8181/33447>
> Best regards,
> Wang Haikun
>>
>>>
>>> Is this URL Freescale internal? I cannot access it.
>>>
>>
>> Looks like it. BTW patman will remove these Gerrit tags automatically.
> Yes, it is our internal URL.
> I forget to remove it.
> It couldn't be better if it will be removed automatically.

I will remove if something not remove automatically.

Anyone have any comments on these patch-set, I'm planning to take these.

https://patchwork.ozlabs.org/patch/473391/
https://patchwork.ozlabs.org/patch/473392/
https://patchwork.ozlabs.org/patch/473393/
https://patchwork.ozlabs.org/patch/473394/

>>>> Tested-by: Review Code-CDREVIEW <CDREVIEW at freescale.com>
>>>> Reviewed-by: Prabhakar Kushwaha <prabhakar at freescale.com>
>>>> ---
>>>> Changes in v3:
>>>> - IS_ENABLED(CONFIG_XXX) is only work with configure option in Kconfig,
>>>>    and DM core code use IS_ENABLED(), so configure option in head file
>>>>    can't work, so remove CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_DM CONFIG_DM_SPI
>>>>
>>>> Changes in v2:
>>>> - Move all changes inside of CONFIG_QSPI_BOOT
>>>>
>>>> Changes in v1: None
>>>>   include/configs/ls1021atwr.h | 10 ++++++++--
>>>>   1 file changed, 8 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
>>>> index 729205f..13e3aa4 100644
>>>> --- a/include/configs/ls1021atwr.h
>>>> +++ b/include/configs/ls1021atwr.h
>>>> @@ -229,16 +229,22 @@
>>>>   #define CONFIG_CMD_FAT
>>>>   #define CONFIG_DOS_PARTITION
>>>>
>>>> -/* QSPI */
>>>> +/* SPI */
>>>>   #ifdef CONFIG_QSPI_BOOT
>>>> +/* QSPI */
>>>>   #define CONFIG_FSL_QSPI
>>>>   #define QSPI0_AMBA_BASE                        0x40000000
>>>>   #define FSL_QSPI_FLASH_SIZE            (1 << 24)
>>>>   #define FSL_QSPI_FLASH_NUM             2
>>>>
>>>> +#define CONFIG_SPI_FLASH_STMICRO
>>>> +
>>>> +/* DM SPI */
>>>> +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
>>>>   #define CONFIG_CMD_SF
>>>> +#define CONFIG_DM_SPI_FLASH
>>>>   #define CONFIG_SPI_FLASH
>>>> -#define CONFIG_SPI_FLASH_STMICRO
>>>> +#endif
>>>>   #endif
>>>>
>>>>   /*
>>>> --

thanks!
-- 
Jagan | openedev.


More information about the U-Boot mailing list