[U-Boot] [PATCH v3 4/4] arm: ls102xa: Enable Driver Model SPI for ls1021atwr

[Simon Glass]

Hi Jagan,

On 18 June 2015 at 00:54, Jagan Teki <jteki at openedev.com> wrote:
> On 18 June 2015 at 07:50, Wang Haikun <Haikun.Wang at freescale.com> wrote:
>> On 6/17/2015 8:30 PM, Simon Glass wrote:
>>> Hi,
>>>
>>> On 17 June 2015 at 03:36, Bin Meng <bmeng.cn at gmail.com> wrote:
>>>> Hi Haikun,
>>>>
>>>> On Mon, May 18, 2015 at 9:25 PM, Haikun Wang <haikun.wang at freescale.com> wrote:
>>>>> From: Haikun Wang <Haikun.Wang at freescale.com>
>>>>>
>>>>> Enable Driver Model SPI for ls1021atwr board.
>>>>> DSPI and QSPI only be enabled when boot from QSPI.
>>>>> DSPI and QSPI are compatible under Driver Model SPI.
>>>>>
>>>>> Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
>>>>> Change-Id: I6342807da7725ae8b678952117c8758c75a61d3d
>>>>> Reviewed-on: http://git.am.freescale.net:8181/33447>
>> Best regards,
>> Wang Haikun
>>>
>>>>
>>>> Is this URL Freescale internal? I cannot access it.
>>>>
>>>
>>> Looks like it. BTW patman will remove these Gerrit tags automatically.
>> Yes, it is our internal URL.
>> I forget to remove it.
>> It couldn't be better if it will be removed automatically.
>
> I will remove if something not remove automatically.
>
> Anyone have any comments on these patch-set, I'm planning to take these.
>
> https://patchwork.ozlabs.org/patch/473391/
> https://patchwork.ozlabs.org/patch/473392/
> https://patchwork.ozlabs.org/patch/473393/
> https://patchwork.ozlabs.org/patch/473394/
>

I already reviewed the first two and they seem good to me.

[snip]

Regards,
Simon