[U-Boot] [PATCH v3 01/25] rockchip: Add serial support

Simon Glass sjg at chromium.org
Wed Jun 24 01:28:46 CEST 2015


Add support for the Rockchip serial device using the ns16550 driver.
This uses driver model and device tree for both SPL and U-Boot proper.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3:
- Update clock rate to always be 24MHz

Changes in v2: None

 drivers/serial/Kconfig           |  9 +++++++++
 drivers/serial/Makefile          |  1 +
 drivers/serial/serial_rockchip.c | 43 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 53 insertions(+)
 create mode 100644 drivers/serial/serial_rockchip.c

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 4829284..3544d66 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -76,6 +76,15 @@ config DEBUG_UART_SHIFT
 	  value. Use this value to specify the shift to use, where 0=byte
 	  registers, 2=32-bit word registers, etc.
 
+config ROCKCHIP_SERIAL
+	bool "Rockchip on-chip UART support"
+	depends on ARCH_UNIPHIER && DM_SERIAL
+	help
+	  Select this to enable a debug UART for Rockchip devices. This uses
+	  the ns16550 driver. You will need to #define CONFIG_SYS_NS16550 in
+	  your board config header. The clock input is automatically set to
+	  use the oscillator (24MHz).
+
 config SANDBOX_SERIAL
 	bool "Sandbox UART support"
 	depends on SANDBOX && DM
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d183eed..b926b49 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
 obj-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
 obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o
 obj-$(CONFIG_MXS_AUART) += mxs_auart.o
+obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
 obj-$(CONFIG_ARC_SERIAL) += serial_arc.o
 obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o
 obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
diff --git a/drivers/serial/serial_rockchip.c b/drivers/serial/serial_rockchip.c
new file mode 100644
index 0000000..0e7bbfc
--- /dev/null
+++ b/drivers/serial/serial_rockchip.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ns16550.h>
+#include <serial.h>
+#include <asm/arch/clock.h>
+
+static const struct udevice_id rockchip_serial_ids[] = {
+	{ .compatible = "rockchip,rk3288-uart" },
+	{ }
+};
+
+static int rockchip_serial_ofdata_to_platdata(struct udevice *dev)
+{
+	struct ns16550_platdata *plat = dev_get_platdata(dev);
+	int ret;
+
+	ret = ns16550_serial_ofdata_to_platdata(dev);
+	if (ret)
+		return ret;
+
+	/* Do all Rockchip parts use 24MHz? */
+	plat->clock = 24 * 1000000;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(serial_ns16550) = {
+	.name	= "serial_rockchip",
+	.id	= UCLASS_SERIAL,
+	.of_match = rockchip_serial_ids,
+	.ofdata_to_platdata = rockchip_serial_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+	.priv_auto_alloc_size = sizeof(struct NS16550),
+	.probe = ns16550_serial_probe,
+	.ops	= &ns16550_serial_ops,
+	.flags	= DM_FLAG_PRE_RELOC,
+};
-- 
2.4.3.573.g4eafbef



More information about the U-Boot mailing list