[U-Boot] [PATCH v3 02/25] rockchip: Bring in RK3288 device tree file includes and bindings
Simon Glass
sjg at chromium.org
Wed Jun 24 01:28:47 CEST 2015
Bring in required device tree files from Linux. Since mainline Linux is
somewhat behind, use the files from the Chromium tree. We can re-sync once
further code is acccepted upstream.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v3:
- Add device tree bindings for CRU and DMC
Changes in v2:
- Tidy up license headers and remove SPL #ifdefs
arch/arm/dts/rk3288-thermal.dtsi | 88 ++
arch/arm/dts/rk3288.dtsi | 1458 ++++++++++++++++++++
.../clock/rockchip,rk3188-cru.txt | 61 +
.../clock/rockchip,rk3288-cru.txt | 61 +
.../clock/rockchip,rk3288-dmc.txt | 155 +++
doc/device-tree-bindings/clock/rockchip.txt | 77 ++
.../pinctrl/rockchip,pinctrl.txt | 157 +++
.../thermal/rockchip-thermal.txt | 68 +
include/dt-bindings/clock/rk3288-cru.h | 370 +++++
include/dt-bindings/clock/rockchip,rk808.h | 11 +
include/dt-bindings/pinctrl/rockchip.h | 26 +
include/dt-bindings/power-domain/rk3288.h | 11 +
12 files changed, 2543 insertions(+)
create mode 100644 arch/arm/dts/rk3288-thermal.dtsi
create mode 100644 arch/arm/dts/rk3288.dtsi
create mode 100644 doc/device-tree-bindings/clock/rockchip,rk3188-cru.txt
create mode 100644 doc/device-tree-bindings/clock/rockchip,rk3288-cru.txt
create mode 100644 doc/device-tree-bindings/clock/rockchip,rk3288-dmc.txt
create mode 100644 doc/device-tree-bindings/clock/rockchip.txt
create mode 100644 doc/device-tree-bindings/pinctrl/rockchip,pinctrl.txt
create mode 100644 doc/device-tree-bindings/thermal/rockchip-thermal.txt
create mode 100644 include/dt-bindings/clock/rk3288-cru.h
create mode 100644 include/dt-bindings/clock/rockchip,rk808.h
create mode 100644 include/dt-bindings/pinctrl/rockchip.h
create mode 100644 include/dt-bindings/power-domain/rk3288.h
diff --git a/arch/arm/dts/rk3288-thermal.dtsi b/arch/arm/dts/rk3288-thermal.dtsi
new file mode 100644
index 0000000..59482c1
--- /dev/null
+++ b/arch/arm/dts/rk3288-thermal.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Device Tree Source for RK3288 SoC thermal
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+reserve_thermal: reserve_thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tsadc 0>;
+
+};
+
+cpu_thermal: cpu_thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tsadc 1>;
+ linux,hwmon;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 6>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+gpu_thermal: gpu_thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tsadc 2>;
+ linux,hwmon;
+
+ trips {
+ gpu_alert0: gpu_alert0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ gpu_crit: gpu_crit {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
new file mode 100644
index 0000000..6b5145c
--- /dev/null
+++ b/arch/arm/dts/rk3288.dtsi
@@ -0,0 +1,1458 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include <dt-bindings/power-domain/rk3288.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3288";
+
+ interrupt-parent = <&gic>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio0;
+ mmc3 = &sdio1;
+ mshc0 = &emmc;
+ mshc1 = &sdmmc;
+ mshc2 = &sdio0;
+ mshc3 = &sdio1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "rockchip,rk3066-smp";
+ rockchip,pmu = <&pmu>;
+
+ cpu0: cpu at 500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a12";
+ reg = <0x500>;
+ operating-points = <
+ /* KHz uV */
+ 1800000 1400000
+ 1704000 1350000
+ 1608000 1300000
+ 1512000 1250000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ resets = <&cru SRST_CORE0>;
+ };
+ cpu at 501 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a12";
+ reg = <0x501>;
+ resets = <&cru SRST_CORE1>;
+ };
+ cpu at 502 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a12";
+ reg = <0x502>;
+ resets = <&cru SRST_CORE2>;
+ };
+ cpu at 503 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a12";
+ reg = <0x503>;
+ resets = <&cru SRST_CORE3>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dmac_peri: dma-controller at ff250000 {
+ compatible = "arm,pl330", "arm,primecell";
+ broken-no-flushp;
+ reg = <0xff250000 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac_bus_ns: dma-controller at ff600000 {
+ compatible = "arm,pl330", "arm,primecell";
+ broken-no-flushp;
+ reg = <0xff600000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dmac_bus_s: dma-controller at ffb20000 {
+ compatible = "arm,pl330", "arm,primecell";
+ broken-no-flushp;
+ reg = <0xffb20000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC1>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ timer {
+ arm,use-physical-timer;
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ always-on;
+ };
+
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopl_out>, <&vopb_out>;
+ };
+
+ sdmmc: dwmmc at ff0c0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff0c0000 0x4000>;
+ status = "disabled";
+ };
+
+ sdio0: dwmmc at ff0d0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+ <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff0d0000 0x4000>;
+ status = "disabled";
+ };
+
+ sdio1: dwmmc at ff0e0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
+ <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff0e0000 0x4000>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc at ff0f0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff0f0000 0x4000>;
+ status = "disabled";
+ };
+
+ saradc: saradc at ff100000 {
+ compatible = "rockchip,saradc";
+ reg = <0xff100000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ status = "disabled";
+ };
+
+ spi0: spi at ff110000 {
+ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 11>, <&dmac_peri 12>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+ reg = <0xff110000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi at ff120000 {
+ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 13>, <&dmac_peri 14>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+ reg = <0xff120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi at ff130000 {
+ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+ clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 15>, <&dmac_peri 16>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+ reg = <0xff130000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at ff140000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff140000 0x1000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at ff150000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff150000 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at ff160000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff160000 0x1000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_xfer>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at ff170000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff170000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_xfer>;
+ status = "disabled";
+ };
+ uart0: serial at ff180000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff180000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+ status = "disabled";
+ };
+
+ uart1: serial at ff190000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff190000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial at ff690000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff690000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "disabled";
+ };
+ uart3: serial at ff1b0000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff1b0000 0x100>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_xfer>;
+ status = "disabled";
+ };
+
+ uart4: serial at ff1c0000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff1c0000 0x100>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer>;
+ status = "disabled";
+ };
+ thermal: thermal-zones {
+ #include "rk3288-thermal.dtsi"
+ };
+
+ tsadc: tsadc at ff280000 {
+ compatible = "rockchip,rk3288-tsadc";
+ reg = <0xff280000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ pinctrl-names = "otp_out";
+ pinctrl-0 = <&otp_out>;
+ #thermal-sensor-cells = <1>;
+ hw-shut-temp = <125000>;
+ status = "disabled";
+ };
+
+ gmac: ethernet at ff290000 {
+ compatible = "rockchip,rk3288-gmac";
+ reg = <0xff290000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ };
+
+ usb_host0_ehci: usb at ff500000 {
+ compatible = "generic-ehci";
+ reg = <0xff500000 0x100>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USBHOST0>;
+ clock-names = "usbhost";
+ phys = <&usbphy1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ /* NOTE: ohci at ff520000 doesn't actually work on hardware */
+
+ usb_host1: usb at ff540000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0xff540000 0x40000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USBHOST1>;
+ clock-names = "otg";
+ phys = <&usbphy2>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb_otg: usb at ff580000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0xff580000 0x40000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb_hsic: usb at ff5c0000 {
+ compatible = "generic-ehci";
+ reg = <0xff5c0000 0x100>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HSIC>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
+ dmc: dmc at ff610000 {
+ compatible = "rockchip,rk3288-dmc", "syscon";
+ rockchip,cru = <&cru>;
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+ rockchip,sgrf = <&sgrf>;
+ rockchip,noc = <&noc>;
+ reg = <0xff610000 0x3fc
+ 0xff620000 0x294
+ 0xff630000 0x3fc
+ 0xff640000 0x294>;
+ rockchip,sram = <&ddr_sram>;
+ clocks = <&cru PCLK_DDRUPCTL0>, <&cru PCLK_PUBL0>,
+ <&cru PCLK_DDRUPCTL1>, <&cru PCLK_PUBL1>,
+ <&cru ARMCLK>;
+ clock-names = "pclk_ddrupctl0", "pclk_publ0",
+ "pclk_ddrupctl1", "pclk_publ1",
+ "arm_clk";
+ };
+
+ i2c0: i2c at ff650000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff650000 0x1000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at ff660000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff660000 0x1000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ status = "disabled";
+ };
+
+ pwm0: pwm at ff680000 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680000 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ pwm1: pwm at ff680010 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680010 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ pwm2: pwm at ff680020 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680020 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ pwm3: pwm at ff680030 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680030 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ bus_intmem at ff700000 {
+ compatible = "mmio-sram";
+ reg = <0xff700000 0x18000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff700000 0x18000>;
+ smp-sram at 0 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x00 0x10>;
+ };
+ ddr_sram: ddr-sram at 1000 {
+ compatible = "rockchip,rk3288-ddr-sram";
+ reg = <0x1000 0x4000>;
+ };
+ };
+
+ sram at ff720000 {
+ compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+ reg = <0xff720000 0x1000>;
+ };
+
+ pmu: power-management at ff730000 {
+ compatible = "rockchip,rk3288-pmu", "syscon";
+ reg = <0xff730000 0x100>;
+ };
+
+ sgrf: syscon at ff740000 {
+ compatible = "rockchip,rk3288-sgrf", "syscon";
+ reg = <0xff740000 0x1000>;
+ };
+
+ cru: clock-controller at ff760000 {
+ compatible = "rockchip,rk3288-cru";
+ reg = <0xff760000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>,
+ <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+ <&cru PLL_NPLL>, <&cru ACLK_CPU>,
+ <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+ <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+ <&cru PCLK_PERI>;
+ assigned-clock-rates = <0>, <0>,
+ <594000000>, <400000000>,
+ <500000000>, <300000000>,
+ <150000000>, <75000000>,
+ <300000000>, <150000000>,
+ <75000000>;
+ assigned-clock-parents = <&cru PLL_NPLL>, <&cru PLL_GPLL>;
+ };
+
+ grf: syscon at ff770000 {
+ compatible = "rockchip,rk3288-grf", "syscon";
+ reg = <0xff770000 0x1000>;
+ };
+
+ wdt: watchdog at ff800000 {
+ compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
+ reg = <0xff800000 0x100>;
+ clocks = <&cru PCLK_WDT>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2s: i2s at ff890000 {
+ compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+ reg = <0xff890000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ status = "disabled";
+ };
+
+ vopb: vop at ff930000 {
+ compatible = "rockchip,rk3288-vop";
+ reg = <0xff930000 0x19c>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopb_mmu>;
+ power-domains = <&power RK3288_PD_VIO>;
+ status = "disabled";
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vopb_out_edp: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&edp_in_vopb>;
+ };
+ vopb_out_hdmi: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_vopb>;
+ };
+ };
+ };
+
+ vopb_mmu: iommu at ff930300 {
+ compatible = "rockchip,iommu";
+ reg = <0xff930300 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopb_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vopl: vop at ff940000 {
+ compatible = "rockchip,rk3288-vop";
+ reg = <0xff940000 0x19c>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopl_mmu>;
+ power-domains = <&power RK3288_PD_VIO>;
+ status = "disabled";
+ vopl_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vopl_out_edp: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&edp_in_vopl>;
+ };
+ vopl_out_hdmi: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_vopl>;
+ };
+
+ };
+ };
+
+ vopl_mmu: iommu at ff940300 {
+ compatible = "rockchip,iommu";
+ reg = <0xff940300 0x100>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopl_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ edp: edp at ff970000 {
+ compatible = "rockchip,rk3288-edp";
+ reg = <0xff970000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru PCLK_EDP_CTRL>;
+ rockchip,grf = <&grf>;
+ clock-names = "clk_edp", "clk_edp_24m", "pclk_edp";
+ resets = <&cru 111>;
+ reset-names = "edp";
+ power-domains = <&power RK3288_PD_VIO>;
+ status = "disabled";
+ ports {
+ edp_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+ edp_in_vopl: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+ };
+ };
+
+ hdmi: hdmi at ff980000 {
+ compatible = "rockchip,rk3288-dw-hdmi";
+ reg = <0xff980000 0x20000>;
+ reg-io-width = <4>;
+ ddc-i2c-bus = <&i2c5>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+ clock-names = "iahb", "isfr";
+ status = "disabled";
+ ports {
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_vopb: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_hdmi>;
+ };
+ hdmi_in_vopl: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_hdmi>;
+ };
+ };
+ };
+ };
+
+ hdmi_audio: hdmi_audio {
+ compatible = "rockchip,rk3288-hdmi-audio";
+ i2s-controller = <&i2s>;
+ status = "disable";
+ };
+
+ vpu: video-codec at ff9a0000 {
+ compatible = "rockchip,rk3288-vpu";
+ reg = <0xff9a0000 0x800>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk_vcodec", "hclk_vcodec";
+ power-domains = <&power RK3288_PD_VIDEO>;
+ iommus = <&vpu_mmu>;
+ };
+
+ vpu_mmu: iommu at ff9a0800 {
+ compatible = "rockchip,iommu";
+ reg = <0xff9a0800 0x100>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vpu_mmu";
+ power-domains = <&power RK3288_PD_VIDEO>;
+ #iommu-cells = <0>;
+ };
+
+ gpu: gpu at ffa30000 {
+ compatible = "arm,malit764",
+ "arm,malit76x",
+ "arm,malit7xx",
+ "arm,mali-midgard";
+ reg = <0xffa30000 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "JOB", "MMU", "GPU";
+ clocks = <&cru ACLK_GPU>;
+ clock-names = "aclk_gpu";
+ operating-points = <
+ /* KHz uV */
+ 100000 950000
+ 200000 950000
+ 300000 1000000
+ 400000 1100000
+ /* 500000 1200000 - See crosbug.com/p/33857 */
+ 600000 1250000
+ >;
+ power-domains = <&power RK3288_PD_GPU>;
+ status = "disabled";
+ };
+
+ noc: syscon at ffac0000 {
+ compatible = "rockchip,rk3288-noc", "syscon";
+ reg = <0xffac0000 0x2000>;
+ };
+
+ efuse: efuse at ffb40000 {
+ compatible = "rockchip,rk3288-efuse";
+ reg = <0xffb40000 0x10000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller at ffc01000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0xffc01000 0x1000>,
+ <0xffc02000 0x1000>,
+ <0xffc04000 0x2000>,
+ <0xffc06000 0x2000>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ cpuidle: cpuidle {
+ compatible = "rockchip,rk3288-cpuidle";
+ };
+
+ usbphy: phy {
+ compatible = "rockchip,rk3288-usb-phy";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy0 {
+ #phy-cells = <0>;
+ reg = <0x320>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ };
+
+ usbphy1: usb-phy1 {
+ #phy-cells = <0>;
+ reg = <0x334>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ };
+
+ usbphy2: usb-phy2 {
+ #phy-cells = <0>;
+ reg = <0x348>;
+ clocks = <&cru SCLK_OTGPHY2>;
+ clock-names = "phyclk";
+ };
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3288-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0 at ff750000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff750000 0x100>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1 at ff780000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff780000 0x100>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2 at ff790000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff790000 0x100>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3 at ff7a0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7a0000 0x100>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio4 at ff7b0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7b0000 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio5 at ff7c0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7c0000 0x100>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO5>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio6 at ff7d0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7d0000 0x100>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio7 at ff7e0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7e0000 0x100>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO7>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio8: gpio8 at ff7f0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7f0000 0x100>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO8>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ sleep {
+ global_pwroff: global-pwroff {
+ rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ ddrio_pwroff: ddrio-pwroff {
+ rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ ddr0_retention: ddr0-retention {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ ddr1_retention: ddr1-retention {
+ rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
+ <0 16 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
+ <8 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
+ <6 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
+ <2 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c4 {
+ i2c4_xfer: i2c4-xfer {
+ rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
+ <7 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c5 {
+ i2c5_xfer: i2c5-xfer {
+ rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
+ <7 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s0 {
+ i2s0_bus: i2s0-bus {
+ rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>,
+ <6 1 RK_FUNC_1 &pcfg_pull_none>,
+ <6 2 RK_FUNC_1 &pcfg_pull_none>,
+ <6 3 RK_FUNC_1 &pcfg_pull_none>,
+ <6 4 RK_FUNC_1 &pcfg_pull_none>,
+ <6 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_cd: sdmcc-cd {
+ rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ sdio0 {
+ sdio0_bus1: sdio0-bus1 {
+ rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>,
+ <4 21 RK_FUNC_1 &pcfg_pull_up>,
+ <4 22 RK_FUNC_1 &pcfg_pull_up>,
+ <4 23 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdio0_cd: sdio0-cd {
+ rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_wp: sdio0-wp {
+ rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_pwr: sdio0-pwr {
+ rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bkpwr: sdio0-bkpwr {
+ rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_int: sdio0-int {
+ rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ sdio1 {
+ sdio1_bus1: sdio1-bus1 {
+ rockchip,pins = <3 24 RK_FUNC_4 &pcfg_pull_up>;
+ };
+
+ sdio1_bus4: sdio1-bus4 {
+ rockchip,pins = <3 24 RK_FUNC_4 &pcfg_pull_up>,
+ <3 25 RK_FUNC_4 &pcfg_pull_up>,
+ <3 26 RK_FUNC_4 &pcfg_pull_up>,
+ <3 27 RK_FUNC_4 &pcfg_pull_up>;
+ };
+
+ sdio1_cd: sdio1-cd {
+ rockchip,pins = <3 28 RK_FUNC_4 &pcfg_pull_up>;
+ };
+
+ sdio1_wp: sdio1-wp {
+ rockchip,pins = <3 29 RK_FUNC_4 &pcfg_pull_up>;
+ };
+
+ sdio1_bkpwr: sdio1-bkpwr {
+ rockchip,pins = <3 30 RK_FUNC_4 &pcfg_pull_up>;
+ };
+
+ sdio1_int: sdio1-int {
+ rockchip,pins = <3 31 RK_FUNC_4 &pcfg_pull_up>;
+ };
+
+ sdio1_cmd: sdio1-cmd {
+ rockchip,pins = <4 6 RK_FUNC_4 &pcfg_pull_up>;
+ };
+
+ sdio1_clk: sdio1-clk {
+ rockchip,pins = <4 7 RK_FUNC_4 &pcfg_pull_none>;
+ };
+
+ sdio1_pwr: sdio1-pwr {
+ rockchip,pins = <4 9 RK_FUNC_4 &pcfg_pull_up>;
+ };
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_pwr: emmc-pwr {
+ rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus1: emmc-bus1 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus4: emmc-bus4 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+ <3 1 RK_FUNC_2 &pcfg_pull_up>,
+ <3 2 RK_FUNC_2 &pcfg_pull_up>,
+ <3 3 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+ <3 1 RK_FUNC_2 &pcfg_pull_up>,
+ <3 2 RK_FUNC_2 &pcfg_pull_up>,
+ <3 3 RK_FUNC_2 &pcfg_pull_up>,
+ <3 4 RK_FUNC_2 &pcfg_pull_up>,
+ <3 5 RK_FUNC_2 &pcfg_pull_up>,
+ <3 6 RK_FUNC_2 &pcfg_pull_up>,
+ <3 7 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi2 {
+ spi2_cs1: spi2-cs1 {
+ rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_clk: spi2-clk {
+ rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_cs0: spi2-cs0 {
+ rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_rx: spi2-rx {
+ rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_tx: spi2-tx {
+ rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
+ <4 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>,
+ <5 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>,
+ <7 23 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
+
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>,
+ <7 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart3_cts: uart3-cts {
+ rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart3_rts: uart3-rts {
+ rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins = <5 12 3 &pcfg_pull_up>,
+ <5 13 3 &pcfg_pull_none>;
+ };
+
+ uart4_cts: uart4-cts {
+ rockchip,pins = <5 14 3 &pcfg_pull_none>;
+ };
+
+ uart4_rts: uart4-rts {
+ rockchip,pins = <5 15 3 &pcfg_pull_none>;
+ };
+ };
+
+ tsadc {
+ otp_out: otp-out {
+ rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <7 22 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <7 23 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ rgmii_pins: rgmii-pins {
+ rockchip,pins = <3 30 3 &pcfg_pull_none>,
+ <3 31 3 &pcfg_pull_none>,
+ <3 26 3 &pcfg_pull_none>,
+ <3 27 3 &pcfg_pull_none>,
+ <3 28 3 &pcfg_pull_none_12ma>,
+ <3 29 3 &pcfg_pull_none_12ma>,
+ <3 24 3 &pcfg_pull_none_12ma>,
+ <3 25 3 &pcfg_pull_none_12ma>,
+ <4 0 3 &pcfg_pull_none>,
+ <4 5 3 &pcfg_pull_none>,
+ <4 6 3 &pcfg_pull_none>,
+ <4 9 3 &pcfg_pull_none_12ma>,
+ <4 4 3 &pcfg_pull_none_12ma>,
+ <4 1 3 &pcfg_pull_none>,
+ <4 3 3 &pcfg_pull_none>;
+ };
+
+ rmii_pins: rmii-pins {
+ rockchip,pins = <3 30 3 &pcfg_pull_none>,
+ <3 31 3 &pcfg_pull_none>,
+ <3 28 3 &pcfg_pull_none>,
+ <3 29 3 &pcfg_pull_none>,
+ <4 0 3 &pcfg_pull_none>,
+ <4 5 3 &pcfg_pull_none>,
+ <4 4 3 &pcfg_pull_none>,
+ <4 1 3 &pcfg_pull_none>,
+ <4 2 3 &pcfg_pull_none>,
+ <4 3 3 &pcfg_pull_none>;
+ };
+ };
+ };
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ rockchip,pmu = <&pmu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+
+ pd_hevc {
+ reg = <RK3288_PD_HEVC>;
+ clocks = <&cru ACLK_HEVC>,
+ <&cru SCLK_HEVC_CABAC>,
+ <&cru SCLK_HEVC_CORE>,
+ <&cru HCLK_HEVC>;
+ };
+
+ pd_vio {
+ reg = <RK3288_PD_VIO>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru ACLK_ISP>,
+ <&cru ACLK_RGA>,
+ <&cru ACLK_VIP>,
+ <&cru ACLK_VOP0>,
+ <&cru ACLK_VOP1>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru HCLK_IEP>,
+ <&cru HCLK_ISP>,
+ <&cru HCLK_RGA>,
+ <&cru HCLK_VIP>,
+ <&cru HCLK_VOP0>,
+ <&cru HCLK_VOP1>,
+ <&cru PCLK_EDP_CTRL>,
+ <&cru PCLK_HDMI_CTRL>,
+ <&cru PCLK_LVDS_PHY>,
+ <&cru PCLK_MIPI_CSI>,
+ <&cru PCLK_MIPI_DSI0>,
+ <&cru PCLK_MIPI_DSI1>,
+ <&cru SCLK_EDP_24M>,
+ <&cru SCLK_EDP>,
+ <&cru SCLK_HDMI_CEC>,
+ <&cru SCLK_HDMI_HDCP>,
+ <&cru SCLK_ISP_JPE>,
+ <&cru SCLK_ISP>,
+ <&cru SCLK_RGA>;
+ };
+
+ pd_video {
+ reg = <RK3288_PD_VIDEO>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ };
+ };
+};
diff --git a/doc/device-tree-bindings/clock/rockchip,rk3188-cru.txt b/doc/device-tree-bindings/clock/rockchip,rk3188-cru.txt
new file mode 100644
index 0000000..0c2bf5e
--- /dev/null
+++ b/doc/device-tree-bindings/clock/rockchip,rk3188-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+ "rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru at 20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial at 10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/doc/device-tree-bindings/clock/rockchip,rk3288-cru.txt b/doc/device-tree-bindings/clock/rockchip,rk3288-cru.txt
new file mode 100644
index 0000000..c9fbb76
--- /dev/null
+++ b/doc/device-tree-bindings/clock/rockchip,rk3288-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru at 20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial at 10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/doc/device-tree-bindings/clock/rockchip,rk3288-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3288-dmc.txt
new file mode 100644
index 0000000..2ca9db7
--- /dev/null
+++ b/doc/device-tree-bindings/clock/rockchip,rk3288-dmc.txt
@@ -0,0 +1,155 @@
+Rockchip Dynamic Memory Controller Driver
+Required properties:
+- compatible: "rockchip,rk3288-dmc", "syscon"
+- rockchip,cru: this driver should access cru regs, so need get cru here
+- rockchip,grf: this driver should access grf regs, so need get grf here
+- rockchip,pmu: this driver should access pmu regs, so need get pmu here
+- rockchip,sgrf: this driver should access sgrf regs, so need get sgrf here
+- rockchip,noc: this driver should access noc regs, so need get noc here
+- reg: dynamic ram protocol controller(PCTL) address and phy controller(PHYCTL) address
+- clock: must include clock specifiers corresponding to entries in the clock-names property.
+- clock-output-names: from common clock binding to override the default output clock name
+ Must contain
+ pclk_ddrupctl0: support clock for access protocol controller registers of channel 0
+ pclk_publ0: support clock for access phy controller registers of channel 0
+ pclk_ddrupctl1: support clock for access protocol controller registers of channel 1
+ pclk_publ1: support clock for access phy controller registers of channel 1
+ arm_clk: for get arm frequency
+-logic-supply: this driver should adjust VDD_LOGIC according to dmc frequency, so need get logic-supply here
+-timings:
+ Must contain
+ rockchip,odt-disable-freq: if ddr clock frequency low than odt-disable-freq,this driver should disable DDR ODT
+ rockchip,dll-disable-freq: if ddr clock frequency low than dll-disable-freq,this driver should disable DDR DLL
+ rockchip,sr-enable-freq: if ddr clock frequency high than sr-enable-freq,this driver should enable the automatic self refresh function
+ rockchip,pd-enable-freq: if ddr clock frequency high than pd-enable-freq,this driver should enable the automatic power down function
+ rockchip,auto-self-refresh-cnt: Self Refresh idle period. Memories are placed into Self-Refresh mode if the NIF is idle in Access state for auto-self-refresh-cnt * 32 * n_clk cycles.The automatic self refresh function is disabled when auto-self-refresh-cnt=0.
+ rockchip,auto-power-down-cnt: Power-down idle period. Memories are placed into power-down mode if the NIF is idle for auto-power-down-cnt n_clk cycles.The automatic power down function is disabled when auto-power-down-cnt=0.
+ rockchip,ddr-speed-bin: DDR3 type,AC timing parameters from the memory data-sheet
+ 0.DDR3_800D (5-5-5)
+ 1.DDR3_800E (6-6-6)
+ 2.DDR3_1066E (6-6-6)
+ 3.DDR3_1066F (7-7-7)
+ 4.DDR3_1066G (8-8-8)
+ 5.DDR3_1333F (7-7-7)
+ 6.DDR3_1333G (8-8-8)
+ 7.DDR3_1333H (9-9-9)
+ 8.DDR3_1333J (10-10-10)
+ 9.DDR3_1600G (8-8-8)
+ 10.DDR3_1600H (9-9-9)
+ 11.DDR3_1600J (10-10-10)
+ 12.DDR3_1600K (11-11-11)
+ 13.DDR3_1866J (10-10-10)
+ 14.DDR3_1866K (11-11-11)
+ 15.DDR3_1866L (12-12-12)
+ 16.DDR3_1866M (13-13-13)
+ 17.DDR3_2133K (11-11-11)
+ 18.DDR3_2133L (12-12-12)
+ 19.DDR3_2133M (13-13-13)
+ 20.DDR3_2133N (14-14-14)
+ 21.DDR3_DEFAULT
+ rockchip,trcd: tRCD,AC timing parameters from the memory data-sheet
+ rockchip,trp: tRP,AC timing parameters from the memory data-sheet
+-rockchip,num-channels: number of SDRAM channels (1 or 2)
+-rockchip,pctl-timing: parameters for the SDRAM setup, in this order:
+ togcnt1u
+ tinit
+ trsth
+ togcnt100n
+ trefi
+ tmrd
+ trfc
+ trp
+ trtw
+ tal
+ tcl
+ tcwl
+ tras
+ trc
+ trcd
+ trrd
+ trtp
+ twr
+ twtr
+ texsr
+ txp
+ txpdll
+ tzqcs
+ tzqcsi
+ tdqs
+ tcksre
+ tcksrx
+ tcke
+ tmod
+ trstl
+ tzqcl
+ tmrr
+ tckesr
+ tdpd
+-rockchip,phy-timing: PHY timing information in this order:
+ dtpr0
+ dtpr1
+ dtpr2
+ mr0..mr3
+-rockchip,sdram-channel: SDRAM channel information, each 8 bits. Both channels
+will be set up the same. The parameters are in this order:
+ rank
+ col
+ bk
+ bw
+ dbw
+ row_3_4
+ cs0_row
+ cs1_row
+- rockchip,sdram-params: SDRAM base parameters, in this order:
+ NOC timing - value for ddrtiming register
+ NOC activate - value for activate register
+ ddrconf - value for ddrconf register
+ DDR frequency in MHz
+ DRAM type (3=DDR3, 6=LPDDR3)
+ stride - stride value for soc_con2 register
+ odt - 1 to enable DDR ODT, 0 to disable
+
+Example:
+ dmc: dmc at ff610000 {
+ compatible = "rockchip,rk3288-dmc", "syscon";
+ rockchip,cru = <&cru>;
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+ rockchip,sgrf = <&sgrf>;
+ rockchip,noc = <&noc>;
+ reg = <0xff610000 0x3fc
+ 0xff620000 0x294
+ 0xff630000 0x3fc
+ 0xff640000 0x294>;
+ clocks = <&cru PCLK_DDRUPCTL0>, <&cru PCLK_PUBL0>,
+ <&cru PCLK_DDRUPCTL1>, <&cru PCLK_PUBL1>,
+ <&cru ARMCLK>;
+ clock-names = "pclk_ddrupctl0", "pclk_publ0",
+ "pclk_ddrupctl1", "pclk_publ1",
+ "arm_clk";
+ };
+
+ &dmc {
+ logic-supply = <&vdd_logic>;
+ timings {
+ rockchip,odt-disable-freq = <333000000>;
+ rockchip,dll-disable-freq = <333000000>;
+ rockchip,sr-enable-freq = <333000000>;
+ rockchip,pd-enable-freq = <666000000>;
+ rockchip,auto-self-refresh-cnt = <0>;
+ rockchip,auto-power-down-cnt = <64>;
+ rockchip,ddr-speed-bin = <21>;
+ rockchip,trcd = <10>;
+ rockchip,trp = <10>;
+ };
+ rockchip,num-channels = <2>;
+ rockchip,pctl-timing = <0x29a 0x1f4 0xc8 0x42 0x4e 0x4 0xea 0xa
+ 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+ 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+ 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+ 0x5 0x0>;
+ rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+ 0xa60 0x40 0x10 0x0>;
+ rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf>;
+ rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+ };
diff --git a/doc/device-tree-bindings/clock/rockchip.txt b/doc/device-tree-bindings/clock/rockchip.txt
new file mode 100644
index 0000000..22f6769
--- /dev/null
+++ b/doc/device-tree-bindings/clock/rockchip.txt
@@ -0,0 +1,77 @@
+Device Tree Clock bindings for arch-rockchip
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+== Gate clocks ==
+
+These bindings are deprecated!
+Please use the soc specific CRU bindings instead.
+
+The gate registers form a continuos block which makes the dt node
+structure a matter of taste, as either all gates can be put into
+one gate clock spanning all registers or they can be divided into
+the 10 individual gates containing 16 clocks each.
+The code supports both approaches.
+
+Required properties:
+- compatible : "rockchip,rk2928-gate-clk"
+- reg : shall be the control register address(es) for the clock.
+- #clock-cells : from common clock binding; shall be set to 1
+- clock-output-names : the corresponding gate names that the clock controls
+- clocks : should contain the parent clock for each individual gate,
+ therefore the number of clocks elements should match the number of
+ clock-output-names
+
+Example using multiple gate clocks:
+
+ clk_gates0: gate-clk at 200000d0 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000d0 0x4>;
+ clocks = <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>,
+ <&dummy>, <&dummy>;
+
+ clock-output-names =
+ "gate_core_periph", "gate_cpu_gpll",
+ "gate_ddrphy", "gate_aclk_cpu",
+ "gate_hclk_cpu", "gate_pclk_cpu",
+ "gate_atclk_cpu", "gate_i2s0",
+ "gate_i2s0_frac", "gate_i2s1",
+ "gate_i2s1_frac", "gate_i2s2",
+ "gate_i2s2_frac", "gate_spdif",
+ "gate_spdif_frac", "gate_testclk";
+
+ #clock-cells = <1>;
+ };
+
+ clk_gates1: gate-clk at 200000d4 {
+ compatible = "rockchip,rk2928-gate-clk";
+ reg = <0x200000d4 0x4>;
+ clocks = <&xin24m>, <&xin24m>,
+ <&xin24m>, <&dummy>,
+ <&dummy>, <&xin24m>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>,
+ <&xin24m>, <&dummy>;
+
+ clock-output-names =
+ "gate_timer0", "gate_timer1",
+ "gate_timer2", "gate_jtag",
+ "gate_aclk_lcdc1_src", "gate_otgphy0",
+ "gate_otgphy1", "gate_ddr_gpll",
+ "gate_uart0", "gate_frac_uart0",
+ "gate_uart1", "gate_frac_uart1",
+ "gate_uart2", "gate_frac_uart2",
+ "gate_uart3", "gate_frac_uart3";
+
+ #clock-cells = <1>;
+ };
diff --git a/doc/device-tree-bindings/pinctrl/rockchip,pinctrl.txt b/doc/device-tree-bindings/pinctrl/rockchip,pinctrl.txt
new file mode 100644
index 0000000..388b213
--- /dev/null
+++ b/doc/device-tree-bindings/pinctrl/rockchip,pinctrl.txt
@@ -0,0 +1,157 @@
+* Rockchip Pinmux Controller
+
+The Rockchip Pinmux Controller, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are several
+muxing options with option 0 being the use as a GPIO.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The Rockchip pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and
+config of the pins in that group. The 'pins' selects the function mode(also
+named pin mode) this pin can work on and the 'config' configures various pad
+settings such as pull-up, etc.
+
+The pins are grouped into up to 5 individual pin banks which need to be
+defined as gpio sub-nodes of the pinmux controller.
+
+Required properties for iomux controller:
+ - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
+ "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
+ "rockchip,rk3288-pinctrl"
+ - rockchip,grf: phandle referencing a syscon providing the
+ "general register files"
+
+Optional properties for iomux controller:
+ - rockchip,pmu: phandle referencing a syscon providing the pmu registers
+ as some SoCs carry parts of the iomux controller registers there.
+ Required for at least rk3188 and rk3288.
+
+Deprecated properties for iomux controller:
+ - reg: first element is the general register space of the iomux controller
+ It should be large enough to contain also separate pull registers.
+ second element is the separate pull register space of the rk3188.
+ Use rockchip,grf and rockchip,pmu described above instead.
+
+Required properties for gpio sub nodes:
+ - compatible: "rockchip,gpio-bank"
+ - reg: register of the gpio bank (different than the iomux registerset)
+ - interrupts: base interrupt of the gpio bank in the interrupt controller
+ - clocks: clock that drives this bank
+ - gpio-controller: identifies the node as a gpio controller and pin bank.
+ - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+ binding is used, the amount of cells must be specified as 2. See generic
+ GPIO binding documentation for description of particular cells.
+ - interrupt-controller: identifies the controller node as interrupt-parent.
+ - #interrupt-cells: the value of this property should be 2 and the interrupt
+ cells should use the standard two-cell scheme described in
+ bindings/interrupt-controller/interrupts.txt
+
+Deprecated properties for gpio sub nodes:
+ - compatible: "rockchip,rk3188-gpio-bank0"
+ - reg: second element: separate pull register for rk3188 bank0, use
+ rockchip,pmu described above instead
+
+Required properties for pin configuration node:
+ - rockchip,pins: 3 integers array, represents a group of pins mux and config
+ setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
+ The MUX 0 means gpio and MUX 1 to N mean the specific device function.
+ The phandle of a node containing the generic pinconfig options
+ to use, as described in pinctrl-bindings.txt in this directory.
+
+Examples:
+
+#include <dt-bindings/pinctrl/rockchip.h>
+
+...
+
+pinctrl at 20008000 {
+ compatible = "rockchip,rk3066a-pinctrl";
+ rockchip,grf = <&grf>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0 at 20034000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20034000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_gates8 9>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ...
+
+ pcfg_pull_default: pcfg_pull_default {
+ bias-pull-pin-default
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <RK_GPIO1 8 1 &pcfg_pull_default>,
+ <RK_GPIO1 9 1 &pcfg_pull_default>;
+ };
+ };
+};
+
+uart2: serial at 20064000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20064000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&mux_uart2>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+};
+
+Example for rk3188:
+
+ pinctrl at 20008000 {
+ compatible = "rockchip,rk3188-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0 at 0x2000a000 {
+ compatible = "rockchip,rk3188-gpio-bank0";
+ reg = <0x2000a000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_gates8 9>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1 at 0x2003c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003c000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_gates8 10>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ...
+
+ };
diff --git a/doc/device-tree-bindings/thermal/rockchip-thermal.txt b/doc/device-tree-bindings/thermal/rockchip-thermal.txt
new file mode 100644
index 0000000..ef802de
--- /dev/null
+++ b/doc/device-tree-bindings/thermal/rockchip-thermal.txt
@@ -0,0 +1,68 @@
+* Temperature Sensor ADC (TSADC) on rockchip SoCs
+
+Required properties:
+- compatible : "rockchip,rk3288-tsadc"
+- reg : physical base address of the controller and length of memory mapped
+ region.
+- interrupts : The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for
+ the peripheral clock.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the name "tsadc-apb".
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.
+- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO.
+- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW
+ 1:HIGH.
+
+Exiample:
+tsadc: tsadc at ff280000 {
+ compatible = "rockchip,rk3288-tsadc";
+ reg = <0xff280000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ pinctrl-names = "default";
+ pinctrl-0 = <&otp_out>;
+ #thermal-sensor-cells = <1>;
+ rockchip,hw-tshut-temp = <95000>;
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+};
+
+Example: referring to thermal sensors:
+thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ cpu_alert0: cpu_alert {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
new file mode 100644
index 0000000..216eee5
--- /dev/null
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -0,0 +1,370 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko at sntech.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define PLL_NPLL 5
+#define ARMCLK 6
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU 64
+#define SCLK_SPI0 65
+#define SCLK_SPI1 66
+#define SCLK_SPI2 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO0 69
+#define SCLK_SDIO1 70
+#define SCLK_EMMC 71
+#define SCLK_TSADC 72
+#define SCLK_SARADC 73
+#define SCLK_PS2C 74
+#define SCLK_NANDC0 75
+#define SCLK_NANDC1 76
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_UART3 80
+#define SCLK_UART4 81
+#define SCLK_I2S0 82
+#define SCLK_SPDIF 83
+#define SCLK_SPDIF8CH 84
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_TIMER4 89
+#define SCLK_TIMER5 90
+#define SCLK_TIMER6 91
+#define SCLK_HSADC 92
+#define SCLK_OTGPHY0 93
+#define SCLK_OTGPHY1 94
+#define SCLK_OTGPHY2 95
+#define SCLK_OTG_ADP 96
+#define SCLK_HSICPHY480M 97
+#define SCLK_HSICPHY12M 98
+#define SCLK_MACREF 99
+#define SCLK_LCDC_PWM0 100
+#define SCLK_LCDC_PWM1 101
+#define SCLK_MAC_RX 102
+#define SCLK_MAC_TX 103
+#define SCLK_EDP_24M 104
+#define SCLK_EDP 105
+#define SCLK_RGA 106
+#define SCLK_ISP 107
+#define SCLK_ISP_JPE 108
+#define SCLK_HDMI_HDCP 109
+#define SCLK_HDMI_CEC 110
+#define SCLK_HEVC_CABAC 111
+#define SCLK_HEVC_CORE 112
+#define SCLK_I2S0_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO0_DRV 115
+#define SCLK_SDIO1_DRV 116
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO0_SAMPLE 119
+#define SCLK_SDIO1_SAMPLE 120
+#define SCLK_EMMC_SAMPLE 121
+#define SCLK_USBPHY480M_SRC 122
+#define SCLK_PVTM_CORE 123
+#define SCLK_PVTM_GPU 124
+
+#define SCLK_MAC 151
+#define SCLK_MACREF_OUT 152
+
+#define DCLK_VOP0 190
+#define DCLK_VOP1 191
+
+/* aclk gates */
+#define ACLK_GPU 192
+#define ACLK_DMAC1 193
+#define ACLK_DMAC2 194
+#define ACLK_MMU 195
+#define ACLK_GMAC 196
+#define ACLK_VOP0 197
+#define ACLK_VOP1 198
+#define ACLK_CRYPTO 199
+#define ACLK_RGA 200
+#define ACLK_RGA_NIU 201
+#define ACLK_IEP 202
+#define ACLK_VIO0_NIU 203
+#define ACLK_VIP 204
+#define ACLK_ISP 205
+#define ACLK_VIO1_NIU 206
+#define ACLK_HEVC 207
+#define ACLK_VCODEC 208
+#define ACLK_CPU 209
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GPIO4 324
+#define PCLK_GPIO5 325
+#define PCLK_GPIO6 326
+#define PCLK_GPIO7 327
+#define PCLK_GPIO8 328
+#define PCLK_GRF 329
+#define PCLK_SGRF 330
+#define PCLK_PMU 331
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_I2C4 336
+#define PCLK_I2C5 337
+#define PCLK_SPI0 338
+#define PCLK_SPI1 339
+#define PCLK_SPI2 340
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_UART3 344
+#define PCLK_UART4 345
+#define PCLK_TSADC 346
+#define PCLK_SARADC 347
+#define PCLK_SIM 348
+#define PCLK_GMAC 349
+#define PCLK_PWM 350
+#define PCLK_RKPWM 351
+#define PCLK_PS2C 352
+#define PCLK_TIMER 353
+#define PCLK_TZPC 354
+#define PCLK_EDP_CTRL 355
+#define PCLK_MIPI_DSI0 356
+#define PCLK_MIPI_DSI1 357
+#define PCLK_MIPI_CSI 358
+#define PCLK_LVDS_PHY 359
+#define PCLK_HDMI_CTRL 360
+#define PCLK_VIO2_H2P 361
+#define PCLK_CPU 362
+#define PCLK_PERI 363
+#define PCLK_DDRUPCTL0 364
+#define PCLK_PUBL0 365
+#define PCLK_DDRUPCTL1 366
+#define PCLK_PUBL1 367
+#define PCLK_WDT 368
+
+/* hclk gates */
+#define HCLK_GPS 448
+#define HCLK_OTG0 449
+#define HCLK_USBHOST0 450
+#define HCLK_USBHOST1 451
+#define HCLK_HSIC 452
+#define HCLK_NANDC0 453
+#define HCLK_NANDC1 454
+#define HCLK_TSP 455
+#define HCLK_SDMMC 456
+#define HCLK_SDIO0 457
+#define HCLK_SDIO1 458
+#define HCLK_EMMC 459
+#define HCLK_HSADC 460
+#define HCLK_CRYPTO 461
+#define HCLK_I2S0 462
+#define HCLK_SPDIF 463
+#define HCLK_SPDIF8CH 464
+#define HCLK_VOP0 465
+#define HCLK_VOP1 466
+#define HCLK_ROM 467
+#define HCLK_IEP 468
+#define HCLK_ISP 469
+#define HCLK_RGA 470
+#define HCLK_VIO_AHB_ARBI 471
+#define HCLK_VIO_NIU 472
+#define HCLK_VIP 473
+#define HCLK_VIO2_H2P 474
+#define HCLK_HEVC 475
+#define HCLK_VCODEC 476
+#define HCLK_CPU 477
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0 0
+#define SRST_CORE1 1
+#define SRST_CORE2 2
+#define SRST_CORE3 3
+#define SRST_CORE0_PO 4
+#define SRST_CORE1_PO 5
+#define SRST_CORE2_PO 6
+#define SRST_CORE3_PO 7
+#define SRST_PDCORE_STRSYS 8
+#define SRST_PDBUS_STRSYS 9
+#define SRST_L2C 10
+#define SRST_TOPDBG 11
+#define SRST_CORE0_DBG 12
+#define SRST_CORE1_DBG 13
+#define SRST_CORE2_DBG 14
+#define SRST_CORE3_DBG 15
+
+#define SRST_PDBUG_AHB_ARBITOR 16
+#define SRST_EFUSE256 17
+#define SRST_DMAC1 18
+#define SRST_INTMEM 19
+#define SRST_ROM 20
+#define SRST_SPDIF8CH 21
+#define SRST_TIMER 22
+#define SRST_I2S0 23
+#define SRST_SPDIF 24
+#define SRST_TIMER0 25
+#define SRST_TIMER1 26
+#define SRST_TIMER2 27
+#define SRST_TIMER3 28
+#define SRST_TIMER4 29
+#define SRST_TIMER5 30
+#define SRST_EFUSE 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+#define SRST_GPIO4 36
+#define SRST_GPIO5 37
+#define SRST_GPIO6 38
+#define SRST_GPIO7 39
+#define SRST_GPIO8 40
+#define SRST_I2C0 42
+#define SRST_I2C1 43
+#define SRST_I2C2 44
+#define SRST_I2C3 45
+#define SRST_I2C4 46
+#define SRST_I2C5 47
+
+#define SRST_DWPWM 48
+#define SRST_MMC_PERI 49
+#define SRST_PERIPH_MMU 50
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_TPIU 53
+#define SRST_PMU_APB 54
+#define SRST_GRF 55
+#define SRST_PMU 56
+#define SRST_PERIPH_AXI 57
+#define SRST_PERIPH_AHB 58
+#define SRST_PERIPH_APB 59
+#define SRST_PERIPH_NIU 60
+#define SRST_PDPERI_AHB_ARBI 61
+#define SRST_EMEM 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMAC2 64
+#define SRST_MAC 66
+#define SRST_GPS 67
+#define SRST_RKPWM 69
+#define SRST_CCP 71
+#define SRST_USBHOST0 72
+#define SRST_HSIC 73
+#define SRST_HSIC_AUX 74
+#define SRST_HSIC_PHY 75
+#define SRST_HSADC 76
+#define SRST_NANDC0 77
+#define SRST_NANDC1 78
+
+#define SRST_TZPC 80
+#define SRST_SPI0 83
+#define SRST_SPI1 84
+#define SRST_SPI2 85
+#define SRST_SARADC 87
+#define SRST_PDALIVE_NIU 88
+#define SRST_PDPMU_INTMEM 89
+#define SRST_PDPMU_NIU 90
+#define SRST_SGRF 91
+
+#define SRST_VIO_ARBI 96
+#define SRST_RGA_NIU 97
+#define SRST_VIO0_NIU_AXI 98
+#define SRST_VIO_NIU_AHB 99
+#define SRST_LCDC0_AXI 100
+#define SRST_LCDC0_AHB 101
+#define SRST_LCDC0_DCLK 102
+#define SRST_VIO1_NIU_AXI 103
+#define SRST_VIP 104
+#define SRST_RGA_CORE 105
+#define SRST_IEP_AXI 106
+#define SRST_IEP_AHB 107
+#define SRST_RGA_AXI 108
+#define SRST_RGA_AHB 109
+#define SRST_ISP 110
+#define SRST_EDP 111
+
+#define SRST_VCODEC_AXI 112
+#define SRST_VCODEC_AHB 113
+#define SRST_VIO_H2P 114
+#define SRST_MIPIDSI0 115
+#define SRST_MIPIDSI1 116
+#define SRST_MIPICSI 117
+#define SRST_LVDS_PHY 118
+#define SRST_LVDS_CON 119
+#define SRST_GPU 120
+#define SRST_HDMI 121
+#define SRST_CORE_PVTM 124
+#define SRST_GPU_PVTM 125
+
+#define SRST_MMC0 128
+#define SRST_SDIO0 129
+#define SRST_SDIO1 130
+#define SRST_EMMC 131
+#define SRST_USBOTG_AHB 132
+#define SRST_USBOTG_PHY 133
+#define SRST_USBOTG_CON 134
+#define SRST_USBHOST0_AHB 135
+#define SRST_USBHOST0_PHY 136
+#define SRST_USBHOST0_CON 137
+#define SRST_USBHOST1_AHB 138
+#define SRST_USBHOST1_PHY 139
+#define SRST_USBHOST1_CON 140
+#define SRST_USB_ADP 141
+#define SRST_ACC_EFUSE 142
+
+#define SRST_CORESIGHT 144
+#define SRST_PD_CORE_AHB_NOC 145
+#define SRST_PD_CORE_APB_NOC 146
+#define SRST_PD_CORE_MP_AXI 147
+#define SRST_GIC 148
+#define SRST_LCDC_PWM0 149
+#define SRST_LCDC_PWM1 150
+#define SRST_VIO0_H2P_BRG 151
+#define SRST_VIO1_H2P_BRG 152
+#define SRST_RGA_H2P_BRG 153
+#define SRST_HEVC 154
+#define SRST_TSADC 159
+
+#define SRST_DDRPHY0 160
+#define SRST_DDRPHY0_APB 161
+#define SRST_DDRCTRL0 162
+#define SRST_DDRCTRL0_APB 163
+#define SRST_DDRPHY0_CTRL 164
+#define SRST_DDRPHY1 165
+#define SRST_DDRPHY1_APB 166
+#define SRST_DDRCTRL1 167
+#define SRST_DDRCTRL1_APB 168
+#define SRST_DDRPHY1_CTRL 169
+#define SRST_DDRMSCH0 170
+#define SRST_DDRMSCH1 171
+#define SRST_CRYPTO 174
+#define SRST_C2C_HOST 175
+
+#define SRST_LCDC1_AXI 176
+#define SRST_LCDC1_AHB 177
+#define SRST_LCDC1_DCLK 178
+#define SRST_UART0 179
+#define SRST_UART1 180
+#define SRST_UART2 181
+#define SRST_UART3 182
+#define SRST_UART4 183
+#define SRST_SIMC 186
+#define SRST_PS2C 187
+#define SRST_TSP 188
+#define SRST_TSP_CLKIN0 189
+#define SRST_TSP_CLKIN1 190
+#define SRST_TSP_27M 191
diff --git a/include/dt-bindings/clock/rockchip,rk808.h b/include/dt-bindings/clock/rockchip,rk808.h
new file mode 100644
index 0000000..1a87343
--- /dev/null
+++ b/include/dt-bindings/clock/rockchip,rk808.h
@@ -0,0 +1,11 @@
+/*
+ * This header provides constants clk index RK808 pmic clkout
+ */
+#ifndef _CLK_ROCKCHIP_RK808
+#define _CLK_ROCKCHIP_RK808
+
+/* CLOCKOUT index */
+#define RK808_CLKOUT0 0
+#define RK808_CLKOUT1 1
+
+#endif
diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h
new file mode 100644
index 0000000..56887e1
--- /dev/null
+++ b/include/dt-bindings/pinctrl/rockchip.h
@@ -0,0 +1,26 @@
+/*
+ * Header providing constants for Rockchip pinctrl bindings.
+ *
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko at sntech.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_ROCKCHIP_PINCTRL_H__
+#define __DT_BINDINGS_ROCKCHIP_PINCTRL_H__
+
+#define RK_GPIO0 0
+#define RK_GPIO1 1
+#define RK_GPIO2 2
+#define RK_GPIO3 3
+#define RK_GPIO4 4
+#define RK_GPIO6 6
+
+#define RK_FUNC_GPIO 0
+#define RK_FUNC_1 1
+#define RK_FUNC_2 2
+#define RK_FUNC_3 3
+#define RK_FUNC_4 4
+
+#endif
diff --git a/include/dt-bindings/power-domain/rk3288.h b/include/dt-bindings/power-domain/rk3288.h
new file mode 100644
index 0000000..ca68c11
--- /dev/null
+++ b/include/dt-bindings/power-domain/rk3288.h
@@ -0,0 +1,11 @@
+#ifndef __DT_BINDINGS_POWER_DOMAIN_RK3288_H__
+#define __DT_BINDINGS_POWER_DOMAIN_RK3288_H__
+
+/* RK3288 power domain index */
+#define RK3288_PD_GPU 0
+#define RK3288_PD_VIO 1
+#define RK3288_PD_VIDEO 2
+#define RK3288_PD_HEVC 3
+#define RK3288_PD_PERI 4
+
+#endif
--
2.4.3.573.g4eafbef
More information about the U-Boot
mailing list