[U-Boot] [PATCH] sf: update sst25wf040b flash params

[Haikun Wang]

From: Haikun Wang <Haikun.Wang at freescale.com>

sst25wf040b doesn't support Auto Address Increment Programming command.
Remove SST_WR flag.

Signed-off-by: Haikun Wang <B53464 at freescale.com>
---
 drivers/mtd/spi/sf_params.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index c12e8c6..283087a 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -100,7 +100,8 @@ const struct spi_flash_params spi_flash_params_table[] = {
 	{"SST25WF010",	   0xbf2502, 0x0,	64 * 1024,     2, RD_NORM,          SECT_4K | SST_WR},
 	{"SST25WF020",	   0xbf2503, 0x0,	64 * 1024,     4, RD_NORM,	    SECT_4K | SST_WR},
 	{"SST25WF040",	   0xbf2504, 0x0,	64 * 1024,     8, RD_NORM,	    SECT_4K | SST_WR},
-	{"SST25WF040B",	   0x621613, 0x0,	64 * 1024,     8, RD_NORM,	    SECT_4K | SST_WR},
+	{"SST25WF040B",	   0x621613, 0x0,	64 * 1024,
+	 8, RD_NORM,	    SECT_4K},
 	{"SST25WF080",	   0xbf2505, 0x0,	64 * 1024,    16, RD_NORM,	    SECT_4K | SST_WR},
 #endif
 #ifdef CONFIG_SPI_FLASH_WINBOND		/* WINBOND */
-- 
1.9.1