[U-Boot] [PATCH] sf: update sst25wf040b flash params

[Jagan Teki]

On 26 June 2015 at 17:27, Haikun Wang <haikun.wang at freescale.com> wrote:
> From: Haikun Wang <Haikun.Wang at freescale.com>
>
> sst25wf040b doesn't support Auto Address Increment Programming command.
> Remove SST_WR flag.
>
> Signed-off-by: Haikun Wang <B53464 at freescale.com>
> ---
>  drivers/mtd/spi/sf_params.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
> index c12e8c6..283087a 100644
> --- a/drivers/mtd/spi/sf_params.c
> +++ b/drivers/mtd/spi/sf_params.c
> @@ -100,7 +100,8 @@ const struct spi_flash_params spi_flash_params_table[] = {
>         {"SST25WF010",     0xbf2502, 0x0,       64 * 1024,     2, RD_NORM,          SECT_4K | SST_WR},
>         {"SST25WF020",     0xbf2503, 0x0,       64 * 1024,     4, RD_NORM,          SECT_4K | SST_WR},
>         {"SST25WF040",     0xbf2504, 0x0,       64 * 1024,     8, RD_NORM,          SECT_4K | SST_WR},
> -       {"SST25WF040B",    0x621613, 0x0,       64 * 1024,     8, RD_NORM,          SECT_4K | SST_WR},
> +       {"SST25WF040B",    0x621613, 0x0,       64 * 1024,
> +        8, RD_NORM,        SECT_4K},

Please check - extran line is not required?

>         {"SST25WF080",     0xbf2505, 0x0,       64 * 1024,    16, RD_NORM,          SECT_4K | SST_WR},
>  #endif
>  #ifdef CONFIG_SPI_FLASH_WINBOND                /* WINBOND */
> --
> 1.9.1
>

thanks!
-- 
Jagan | openedev.