[U-Boot] [PATCH] sf: update sst25wf040b flash params

[Wang Haikun]

On 6/27/2015 3:35 AM, Jagan Teki wrote:
> On 26 June 2015 at 17:27, Haikun Wang <haikun.wang at freescale.com> wrote:
>> From: Haikun Wang <Haikun.Wang at freescale.com>
>>
>> sst25wf040b doesn't support Auto Address Increment Programming command.
>> Remove SST_WR flag.
>>
>> Signed-off-by: Haikun Wang <B53464 at freescale.com>
>> ---
>>   drivers/mtd/spi/sf_params.c | 3 ++-
>>   1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
>> index c12e8c6..283087a 100644
>> --- a/drivers/mtd/spi/sf_params.c
>> +++ b/drivers/mtd/spi/sf_params.c
>> @@ -100,7 +100,8 @@ const struct spi_flash_params spi_flash_params_table[] = {
>>          {"SST25WF010",     0xbf2502, 0x0,       64 * 1024,     2, RD_NORM,          SECT_4K | SST_WR},
>>          {"SST25WF020",     0xbf2503, 0x0,       64 * 1024,     4, RD_NORM,          SECT_4K | SST_WR},
>>          {"SST25WF040",     0xbf2504, 0x0,       64 * 1024,     8, RD_NORM,          SECT_4K | SST_WR},
>> -       {"SST25WF040B",    0x621613, 0x0,       64 * 1024,     8, RD_NORM,          SECT_4K | SST_WR},
>> +       {"SST25WF040B",    0x621613, 0x0,       64 * 1024,
>> +        8, RD_NORM,        SECT_4K},
>
> Please check - extran line is not required?
If I put them in one line, checkpatch will report a warning:
WARNING: line over 80 characters.
>
>>          {"SST25WF080",     0xbf2505, 0x0,       64 * 1024,    16, RD_NORM,          SECT_4K | SST_WR},
>>   #endif
>>   #ifdef CONFIG_SPI_FLASH_WINBOND                /* WINBOND */
>> --
>> 1.9.1
>>
>
> thanks!
>