[U-Boot] [PATCH 2/8] Exynos5: Fix rpll_sdiv to support both peach-pit and peach-pi panels

[Ajay Kumar]

The existing setting for rpll_sdiv generates 70.5Mhz RPLL
video clock to drive 1366x768 panel on peach_pit.

This clock rate is not sufficient to drive 1920x1080 panel on peach-pi.
So, we adjust rpll_sdiv to 3 so that it generates 141Mhz pixel clock
which can drive peach-pi LCD.

This change doesn't break peach-pit LCD since 141/2=70.5Mhz, i.e FIMD
divider at IP level will get set to 1(the required divider setting
will be calculated and set by exynos_fimd_set_clock()) and hence
peach-pit LCD still works fine.

Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
---
 arch/arm/cpu/armv7/exynos/clock_init_exynos5.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
index 0aff3d0..0200fd1 100644
--- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
+++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
@@ -179,10 +179,10 @@ struct mem_timings mem_timings[] = {
 		.spll_mdiv = 0xc8,
 		.spll_pdiv = 0x3,
 		.spll_sdiv = 0x2,
-		/* RPLL @70.5Mhz */
+		/* RPLL @141Mhz */
 		.rpll_mdiv = 0x5E,
 		.rpll_pdiv = 0x2,
-		.rpll_sdiv = 0x4,
+		.rpll_sdiv = 0x3,
 
 		.direct_cmd_msr = {
 			0x00020018, 0x00030000, 0x00010046, 0x00000d70,
-- 
1.7.9.5