[U-Boot] [PATCH 2/4] sun7i: Add support for the Wits Pro A20 DKT board

[Ian Campbell]

On Sat, 2015-03-07 at 20:00 +0100, Hans de Goede wrote:
> Hi,
> 
> On 07-03-15 15:05, Hans de Goede wrote:
> > The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi,
> > 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of
> > IO connectors.
> >
> > Note there seem to be multiple sdcard slots on the board (4 in total), but
> > other then mmc0 none of these are hooked up by default, there is a ton of
> > dip-switches which likely allow hooking some of these up, but the documentation
> > of the board only describes the use of a fraction of them, so for now we
> > only support mmc0.
> >
> > Also see: http://www.merrii.com/en/pla_d.asp?id=163
> >
> > Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> 
> Ugh I forgot to update MAINTAINERS for this and the 2 other new boards
> (will I ever learn?). I will fix this in my personal tree.

;-)

With the 3 MAINTAINERS entries in the right places you can add
        Acked-by: Ian Campbell <ijc at hellion.org.uk>
to all three of them too.

Sigh to YA$PKB (Yet Another $FRUIT Pi Knockoff Board), can no one think
of an original name any more!

Ian.