[U-Boot] [PATCH 2/4] sun7i: Add support for the Wits Pro A20 DKT board

[Hans de Goede]

Hi,

On 07-03-15 15:05, Hans de Goede wrote:
> The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi,
> 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of
> IO connectors.
>
> Note there seem to be multiple sdcard slots on the board (4 in total), but
> other then mmc0 none of these are hooked up by default, there is a ton of
> dip-switches which likely allow hooking some of these up, but the documentation
> of the board only describes the use of a fraction of them, so for now we
> only support mmc0.
>
> Also see: http://www.merrii.com/en/pla_d.asp?id=163
>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>

Ugh I forgot to update MAINTAINERS for this and the 2 other new boards
(will I ever learn?). I will fix this in my personal tree.

Regards,

Hans

> ---
>   configs/Wits_Pro_A20_DKT_defconfig | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
>   create mode 100644 configs/Wits_Pro_A20_DKT_defconfig
>
> diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig
> new file mode 100644
> index 0000000..de42b3c
> --- /dev/null
> +++ b/configs/Wits_Pro_A20_DKT_defconfig
> @@ -0,0 +1,15 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI"
> +CONFIG_FDTFILE="sun7i-a20-wits-pro-a20-dkt.dtb"
> +CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22,lo:15,hs:1,vs:1,sync:3,vmode:0"
> +CONFIG_VIDEO_LCD_POWER="PH8"
> +CONFIG_VIDEO_LCD_BL_EN="PH7"
> +CONFIG_VIDEO_LCD_BL_PWM="PB2"
> +CONFIG_VIDEO_LCD_PANEL_LVDS=y
> +CONFIG_VIDEO_VGA=y
> ++S:CONFIG_ARM=y
> ++S:CONFIG_ARCH_SUNXI=y
> ++S:CONFIG_MACH_SUN7I=y
> ++S:CONFIG_DRAM_CLK=384
> ++S:CONFIG_DRAM_ZQ=127
> ++S:CONFIG_DRAM_EMR1=4
>