[U-Boot] [PATCH 2/2] tegra: seaboard: Correct the gpio_request() call

[Simon Glass]

Let's try this:

Reported-by: Stephen Warren <swarren at nvidia.com>


On 9 March 2015 at 19:12, Simon Glass <sjg at chromium.org> wrote:
> Requesting a GPIO without a name is not supposed anymore. This causes the
> request to fail. Add a name so that the serial console works on seaboard.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
>  board/nvidia/seaboard/seaboard.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
> index 25480e4..2d07001 100644
> --- a/board/nvidia/seaboard/seaboard.c
> +++ b/board/nvidia/seaboard/seaboard.c
> @@ -20,7 +20,7 @@
>  void gpio_early_init_uart(void)
>  {
>         /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
> -       gpio_request(GPIO_PI3, NULL);
> +       gpio_request(GPIO_PI3, "uart_en");
>         gpio_direction_output(GPIO_PI3, 0);
>  }
>  #endif
> --
> 2.2.0.rc0.207.ga3a616c
>